Jump to content

Ink Flow And Scratchiness(No Disassembly Needed)


Pen Reviewer

Recommended Posts

I'm new to FPN, but I've used fountain pens for a long time now and I'm prepared to help others. First lets get ink flow adjusted.[NOTE THAT THESE ACTIONS WILL MOST LIKELY VOID THE WARRANTY OF YOUR PEN. I REFUSE TO TAKE RESPONSIBILITY FOR THE BRAKING/ INEFFECTIVENESS OF YOUR PEN. YOU FOLLOW MY ADVICE AT YOUR OWN RISK]

 

You probably want to detach the nib if you can, as it is less likely to break if you do. Wash it and place it on a hard surface that is covered with a cloth or tissues. Place it wih the nib facing upwards and press down with your index finger until it splits down the middle(not breaking but split down the line that splits the tines). Hold for ten seconds then attach back to the feed. Rinse and repeat until satisfactory.

 

Next, the scratchiness. The main cause for scratchiness is misalignment. If you modified the ink flow, the alignment may be slightly off. Take off the nib and wash it(again). Then, grip the shoulders of the nib and look at it so that you see the tip of the nib. Push one of the times up or down until fully aligned.

 

With a non detachable nib, you can do the alignment with the same method. But for the ink flow press the nib against paper so it splits in the same fashion. Hold for ten seconds and rinse and repeat until satisfactory. Again, you may need to realign the tines.

 

Thanks for reading!

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • Pen Reviewer

    2

  • kirchh

    1

  • tryphon

    1

  • Freddy

    1

Top Posters In This Topic

I don't agree with the need of removing the nib, nor with how you do that! More advice can be found here, the result of 40 years of collecting and working on fountain pens:

 

http://www.newpentrace.net/articleGA04.html

This is a way that is quick and easy to do. I have been doing this to countless pens and they work better than any way that others show in my opinion. I have helped others (friends, family etc.) and they say it improves the performance a lot. I bought a Parker Reflex and the scratchiness and dryness was unbelievable. After doing my method, it worked. Though you may be correct, the method I have shown has equal potential to the one in the link. I agree it may not be the most effective, but it is sufficient.
Link to comment
Share on other sites

Fascinatin' Stuff....and Spooky....Ain't it...

 

And..Pen Reviewer....Welcome aboard....Enjoy your time here....

 

Fred

...glared at me like a viper about to strike a rodent

~ R. Emmett Tyrrell

Link to comment
Share on other sites

I don't recommend this ink flow adjustment procedure.

 

--Daniel

"The greatest mental derangement is to believe things because we want them to be true, not because we observe that they are in effect." --Jacques-Bénigne Bossuet

Daniel Kirchheimer
Specialty Pen Restoration
Authorized Sheaffer/Parker/Waterman Vintage Repair Center
Purveyor of the iCroScope digital loupe

Link to comment
Share on other sites

  • 2 weeks later...

I am reminded of the saying "a little bit of knowledge is a dangerous thing".

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43972
    2. PAKMAN
      PAKMAN
      35569
    3. inkstainedruth
      inkstainedruth
      31296
    4. Ghost Plane
      Ghost Plane
      28220
    5. Bo Bo Olson
      Bo Bo Olson
      27747
  • Upcoming Events

    No upcoming events found
  • Blog Comments

    • stylographile
      Awesome! I'm in the process of preparing my bag for our pen meet this weekend and I literally have none of the items you mention!! I'll see if I can find one or two!
    • inkstainedruth
      @asota -- Yeah, I think I have a few rolls in my fridge that are probably 20-30 years old at this point (don't remember now if they are B&W or color film) and don't even really know where to get the film processed, once the drive through kiosks went away....  I just did a quick Google search and (in theory) there was a place the next town over from me -- but got a 404 error message when I tried to click on the link....  Ruth Morrisson aka inkstainedruth 
    • alkman
      There is still chemistry for processing regular chrome (positive) films like Kodak Ektachrome and Fuji Velvia, but Kodachrome was a completely different and multistep beast. 
    • Ceilidh
      Ah, but how to get it processed - that is the question. I believe that the last machine able to run K-14 (Kodachrome processing) ceased to operate some 15 or so years ago. Perhaps the film will be worth something as a curiosity in my estate sale when I die. 😺
    • Mercian
      Take a lot of photos!   If the film has deteriorated or 'gone off' in any way, you can use that as a 'feature' to take 'arty' pictures - whether of landmarks, or people, or whatever.
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...