Jump to content

Waterman Fountain Pen Phileas Kultur Leaking With Converter


Moondancer

Recommended Posts

Hi, I purchased a Waterman Fountain Pen Phileas Kultur Iridescent Blue Fountain Pen last September on eBay, and bought a waterman converter on Amazon. It has always been a bit of a tough starter to get the ink flowing, but recently, when I thought it just was being stubborn, I opened up the barrel to find it full of ink and the converter empty. I cleaned it out and reseated the converter, and it happened again. I do carry the pen around in a case with my sailor pen in my backpack, but the sailor is fine, and the waterman will not hold its ink, suddenly. (It doesn't get as much use as the Sailor does.)

 

I'm wondering if it's the pen or the converter. Can I tell if it's a real Waterman? I suppose if it seems to be I should just try another converter? Is Amazon generally trustworthy on that sort of thing or are there inferior products out there too? I only used both sources as my usual pen shops didn't have the pen at the time, and lower Manhattan & NJ were in the midst of an apparent converter drought....

 

Anyone have similar experience with this particular pen?

 

Thanks!

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • Left FPN

    2

  • Moondancer

    2

  • pajaro

    1

  • Pentode

    1

I dont have that particular pen but converters do wear out. They shouldnt wear out so quickly but its possible you just got a dud.

 

I would definitely suspect the converter before I blamed the pen.

Link to comment
Share on other sites

You might try using a toothpick to pick up a tiny bit of silicone lubricant and put it through the ink hole in the converter and spread it around inside. Work the converter a few times and see if it will hold water or ink as you prefer.

"Don't hurry, don't worry. It's better to be late at the Golden Gate than to arrive in Hell on time."
--Sign in a bar and grill, Ormond Beach, Florida, 1960.

 

 

Link to comment
Share on other sites

I suspect you have the latest style converter with hard plastic mouth. Have a close look at the lip to check for a split.

Link to comment
Share on other sites

I suspect you have the latest style converter with hard plastic mouth. Have a close look at the lip to check for a split.

 

Hmmm. There is a split on both sides of the opening. Also noticed in cleaning it out there's a bubbling action going on and water/ink behind the vacuum section too. I'll try another converter....

 

Thanks everyone,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43972
    2. PAKMAN
      PAKMAN
      35533
    3. inkstainedruth
      inkstainedruth
      31151
    4. Ghost Plane
      Ghost Plane
      28220
    5. Bo Bo Olson
      Bo Bo Olson
      27747
  • Upcoming Events

    No upcoming events found
  • Blog Comments

    • stylographile
      Awesome! I'm in the process of preparing my bag for our pen meet this weekend and I literally have none of the items you mention!! I'll see if I can find one or two!
    • inkstainedruth
      @asota -- Yeah, I think I have a few rolls in my fridge that are probably 20-30 years old at this point (don't remember now if they are B&W or color film) and don't even really know where to get the film processed, once the drive through kiosks went away....  I just did a quick Google search and (in theory) there was a place the next town over from me -- but got a 404 error message when I tried to click on the link....  Ruth Morrisson aka inkstainedruth 
    • alkman
      There is still chemistry for processing regular chrome (positive) films like Kodak Ektachrome and Fuji Velvia, but Kodachrome was a completely different and multistep beast. 
    • Ceilidh
      Ah, but how to get it processed - that is the question. I believe that the last machine able to run K-14 (Kodachrome processing) ceased to operate some 15 or so years ago. Perhaps the film will be worth something as a curiosity in my estate sale when I die. 😺
    • Mercian
      Take a lot of photos!   If the film has deteriorated or 'gone off' in any way, you can use that as a 'feature' to take 'arty' pictures - whether of landmarks, or people, or whatever.
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...