Paper for 3-ring binders?

[writebyhand]

Does anyone know where you can buy high quality paper for a 3-ring binder? I have lots of 3-ring binders and they're perfect for integrating handouts from class, printouts, notes, and anything else that comes on an 8 1/2 x 11 page into one notebook. If you don't know of a 3-hole-punched paper, do you know where you can buy ruled 8 1/2 x 11 fountain pen paper?

 

I am tired of using cheap looseleaf paper from Staples (which doesn't work very well with a fountain pen) and it would be great to find a paper (in the right size) which is similar to Rhodia or Clairefontaine paper.

 

Thanks very much.

[Clive Merrick Morel]

Does anyone know where you can buy high quality paper for a 3-ring binder?

Writebyhand,

 

I'd like to learn the answer to this question, as well. I've seen what appears to be high quality 3-ring binder paper offered for sale at the local Barnes & Noble bookstore, but the price was a bit steep from what I recall. It's been at least two years since I saw the stuff sitting on a display shelf among the various other-than-books items, located in the front of the store.

 

It's difficult to impossible to determine how "good" any writing paper can be simply by Googling. And cost isn't always the deciding factor, as I have found out...

 

Other FPN members with experience in this arena are priceless sources of information!

 

Best of luck in your (okay, our) search.

 

Cheers!

 

-Clive

[ProsaicParadise]

Hello!

 

For my work I write lots of notes on legal pads and then tear the sheets off and file them in the appropriate 3-ring binder by project or topic. I confess I don't really care if it comes with the holes, I just always have a hole puncher handy!

 

I liked both the Doane paper and the Rhodia - thread here:

https://www.fountainpennetwork.com/forum/in...showtopic=94409

 

[Leftytoo]

1) The well known and highly regarded Ampad "Gold Fibre" paper is size 8 1/2 x 11 (lots of the cheap stuff is 8 x 10 1/2) and it comes pre-punched with 3 generous holes. Available at Staples. This is a medium-priced paper, takes to fountain pens very well.

 

2) You can buy a 3-hole punch for a few dollars, but most punch small holes that do not slide so easily over the rings.

 

3) Staples and Office Depot both sell pre-punched 8 1/2 x 11 paper with a plasticized strip on the left which reinforces the holes. It usually comes in a plain cellophane wrapper, loose sheets. This paper is heavy and very tough and withstands lots of handling without tearing. It is on the expensive side, about $5 for 100 sheets. This paper is quite toothy and porous; it will soak up lots of ink, sort of the opposite of the smooth, filled French papers. But it still works well for permanent notes subject to lots of handling.

 

Hope this helps,

 

Bob

[jmw19]

Well, if you're okay with a thinner paper that works well with fountain pens, the Staples Eco-Friendly paper is worth a try. I finally stopped in and picked up a composition book and smaller notebook made with the same paper, and it really is pretty good, and very reasonably priced.

 

Otherwise, I'd buy some decent paper in the 24 to 28 pound range and a punch and make my own. I do much the same thing, but with a Circa punch for that style of notebook. It's more expensive at first, but the flexibility of using whatever paper you want more than makes up for it.

[Clive Merrick Morel]

I'd buy some decent paper in the 24 to 28 pound range and a punch and make my own. I do much the same thing, but with a Circa punch for that style of notebook. It's more expensive at first, but the flexibility of using whatever paper you want more than makes up for it.

Hello JMW,

 

You make a great deal of sense. Purchasing say, Clairefontaine, J. Herbin, etc., paper in the 24 to 28 pound range, then punching one's own holes provides a much better/greater range of choices. Very well done.

 

Thank you very much!

 

Cheers!

[Clive Merrick Morel]

Hello!

 

For my work I write lots of notes on legal pads and then tear the sheets off and file them in the appropriate 3-ring binder by project or topic. I confess I don't really care if it comes with the holes, I just always have a hole puncher handy!

 

I liked both the Doane paper and the Rhodia - thread here:

https://www.fountainpennetwork.com/forum/in...showtopic=94409

ProsaicParadise,

 

I appreciate both your suggestions - the procedure and the link. Thanks a lot!

 

Best Regards,

 

-Clive

 

 

[someonesdad]

I have tested 30-40 different papers (including Rhodia and Clairefontaine) to find what I like best for use with fountain pens and Domtar Solutions 105 gsm paper is my favorite. I can buy it locally for about $20 per ream of ANSI A size paper. Punch it and stick it in the binder.

 

I used a fabulous binder paper when I was in college -- it was perfect for use with fountain pens. I doubt it's made anymore (it was over 40 years ago), but I wish I had bought a truckload of it. It took ink beautifully and had nice, rounded corners.

[PS104]

from Leftytoo:

"2) You can buy a 3-hole punch for a few dollars, but most punch small holes that do not slide so easily over the rings."

 

If you can locate a Foothill 310 they punch holes 3/8" as compared to 2/8" for "regular" hole punchers (ruler measurement)

Lots of wiggle-room going over the rings

 

Foothill Workshop

Pasadena CA 91103

[Clive Merrick Morel]

I have tested 30-40 different papers (including Rhodia and Clairefontaine) to find what I like best for use with fountain pens and Domtar Solutions 105 gsm paper is my favorite. I can buy it locally for about $20 per ream of ANSI A size paper. Punch it and stick it in the binder.

 

I used a fabulous binder paper when I was in college -- it was perfect for use with fountain pens. I doubt it's made anymore (it was over 40 years ago), but I wish I had bought a truckload of it. It took ink beautifully and had nice, rounded corners.

Thanks a LOT, Someonesdad!!!

 

Would you please let me know which particular Domtar paper you're referring to? I looked for but couldn't find "Domtar Solutions" listed in the drop-down menus.

 

Clairefontaine and Rhodia are very popular brands among FPNers (and for good reason). However, after having tested between 30-40 different types, you've certainly convinced/persuaded me to give Domtar a shot.

 

After I hear from you regarding which particular Domtar model to purchase, it's off to the local office supply store I go!

 

Your info is very much appreciated. Thanks again.

 

-Clive

[Clive Merrick Morel]

If you can locate a Foothill 310 they punch holes 3/8" as compared to 2/8" for "regular" hole punchers (ruler measurement). Lots of wiggle-room going over the rings.

PS104,

 

Thanks for the information regarding the Foothill_310 3/8-inch punch. Looks like eBay had the item up for bid, so it's a safe bet one can find another in short order. I've owned this particular Swingline model for many years, but its limited 9/32" punched holes would be a bit constricting in this particular application.

 

Very Best Regards,

 

-Clive

[excarnate]

Does anyone know where you can buy high quality paper for a 3-ring binder?

Can I modify this to add "narrow ruled"? I only ever see college ruled and wide ruled. Both too wide for me (and a friend). In my childhood narrow ruled 3-ring refills were available at typical stores (e.g. Target).

[Miranda]

I agree with the buy your own paper and punch it. It works for me

in spiral binding. Just make sure it's a reasonably heavy duty punch as paper is tough stuff!

 

Can I modify this to add "narrow ruled"? I only ever see college ruled and wide ruled.

 

 

I've also set up a lined paper and grid paper in msword and print it out on the paper. grids are extra fun because one can create bigger blank boxes for doodling in!

[Clive Merrick Morel]

I've also set up a lined paper and grid paper in msword and print it out on the paper. Grids are extra fun because one can create bigger blank boxes for doodling in!

Miranda,

 

Brilliant idea! One that I'm definitely going to use. Thanks a lot!

 

Cheers!

 

-Clive

[Crobe]

I buy 32 lb paper (HP in white, Staples brand in ivory) and print my own lines. I downloaded the template from this web site. http://incompetech.com/graphpaper/

You can set how many lines per inch you want on the sheet.

 

I also use Staples Eco-Friendly paper as well.

 

Mike

[Clive Merrick Morel]

http://incompetech.com/graphpaper/

Thanks, Mike! That site is an incredible source of templates!!!

 

VERY much appreciated.

 

-Clive

[henrico]

http://incompetech.com/graphpaper/

Thanks, Mike! That site is an incredible source of templates!!!

 

VERY much appreciated.

 

-Clive

 

Thanks Clive. Great site for making your own ruled paper.

 

Henrico

 

[Miranda]

Thanks Clive.

 

It's easy to set line height in MS word, too. Use rows and type in the height. for grids, define the cells as,

say 0.5cm W, 0.5 H. and the colours can complement the colour of the ink you are using.

[Clive Merrick Morel]

Thanks Clive. Great site for making your own ruled paper.

 

Henrico

You're most welcome, Henrico! It certainly is a great site. Thanks again.

 

-Clive

[Clive Merrick Morel]

Thanks Clive.

 

It's easy to set line height in MS word, too. Use rows and type in the height. for grids, define the cells as, say 0.5cm W, 0.5 H. and the colours can complement the colour of the ink you are using.

Miranda,

 

I've just finished setting-up a (growing) number of custom grid patterns in Word -- thanks to you!

 

Your input is very much appreciated. Just wanted you to know...

 

Very Best Regards,

 

-Clive