Jump to content

Montblanc 139 Replica -Tibaldi Impero Celluloid


fountainbel

Recommended Posts

Hi all,

Below a few pictures of a new MB139 “replica" in Tibaldi Impero celluloid I’ve just finished in my shop.
Note he pen is dimensionally not an exact replica , and this for the following reasons :
1- The barrel end diamater and the filler housing diameter are slightly reduced, and the filling knob features a small conical diameter reduction over a 5mm length at its top.
The modifications were triggered by the fact that I have encountered too many MB139 caps with cracked cap lips.
These cracks were generated by posting the cap on the barrel .
On the original MB design the barrel "wedges” in the cap lip , hence creates radial tensions on the cap lip.
By slightly reducing the barrel and filler housing diameter, the barrel can enter 5mm deeper in the cap.
And by providing the small conical diameter reduction on the filling knob, the filling knob now enters 3mm deep in the nib chamber.
Doing so posting now occurs by wedging the filling knob top cone inside the nib chamber entry, were the cap is very robust.
No radial tensions on the fragile cap lip anymore .
On the attached sketch you can see on top the original posting ,and below the modification I’ve made
2- I’ve made the central cap ring and the clip from sterling silver, and the two small cap rings from gold plated brass.,
So cap rings set-up is inversely to the original MB139 set up
3- I’ve used a telescopic filler originating from the Montblanc 14X range pens, given these fillers are more maintenance friendly.
The MB nib installed is a flex F/M nib of the fifties in combination with a ski-slope feed both mounted in a screw in nib housing.
Sorry for the poor pictures, but the Photobucket editor being already 2 weeks not functional I can't do better
As always your comments and critique are very welcome !
Best regards,
Francis
Link to comment
Share on other sites

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

  • dcpritch

    3

  • fountainbel

    2

  • thygreyt

    2

  • Karmachanic

    1

Looks great. My favorite celluloid with an amazing form factor and top notch nib. What's not to love?! A+++

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

Stunning pen Francis, I like the inverse ring colors, call it "931", most eclusive and beautiful...it looks so easy for you !

Link to comment
Share on other sites

Masterful, as always, Francis!

 

Being a person who (nearly) always posts, I'm delighted to see the thought you have put into that issue. Nice solution. Just curious: do you need a donor 139/149 for each of these pens? And is that an original ink window?

 

Thanks for sharing, I always enjoy marvelling at your work.

Best wishes. CS

Edited by CS388
Link to comment
Share on other sites

It’s stunning. I love these flattop pens; the super-long ink window and cap work reminiscent of a 139 are nice touches.

Link to comment
Share on other sites

I really enjoy your enthusiasm for your projects, from both the aesthetic and the engineering standpoints. Well done!

Link to comment
Share on other sites

Hi, Francis!

 

Can I tell I wholeheartedly hate you? :lol:

 

On one hand, your works are a pleasure for the eye and the mind, knowing how strongly you thought about the result, the many hours you put on them, and the masterfulness of the result achieved.

 

But then, on the other, knowing that, because all of the above the price it lawfully commands, I won't ever be able to own one of your marvels... GRRRR!!!

Edited by jmnav
Link to comment
Share on other sites

W-A-A-A-A-A-A-N-T. :-)

 

But what's truly impressive, apart from the beauty of the finished product, is that fact that you've actually been able to improve on the original through thoughtful consideration of the engineering issues.

Too many pens, too little time!

http://fountainpenlove.blogspot.fr/

Link to comment
Share on other sites

 

Hi all,

Below a few pictures of a new MB139 “replica" in Tibaldi Impero celluloid I’ve just finished in my shop.
Note he pen is dimensionally not an exact replica , and this for the following reasons :
1- The barrel end diamater and the filler housing diameter are slightly reduced, and the filling knob features a small conical diameter reduction over a 5mm length at its top.
The modifications were triggered by the fact that I have encountered too many MB139 caps with cracked cap lips.
These cracks were generated by posting the cap on the barrel .
On the original MB design the barrel "wedges” in the cap lip , hence creates radial tensions on the cap lip.
By slightly reducing the barrel and filler housing diameter, the barrel can enter 5mm deeper in the cap.
And by providing the small conical diameter reduction on the filling knob, the filling knob now enters 3mm deep in the nib chamber.
Doing so posting now occurs by wedging the filling knob top cone inside the nib chamber entry, were the cap is very robust.
No radial tensions on the fragile cap lip anymore .
On the attached sketch you can see on top the original posting ,and below the modification I’ve made
2- I’ve made the central cap ring and the clip from sterling silver, and the two small cap rings from gold plated brass.,
So cap rings set-up is inversely to the original MB139 set up
3- I’ve used a telescopic filler originating from the Montblanc 14X range pens, given these fillers are more maintenance friendly.
The MB nib installed is a flex F/M nib of the fifties in combination with a ski-slope feed both mounted in a screw in nib housing.
Sorry for the poor pictures, but the Photobucket editor being already 2 weeks not functional I can't do better
As always your comments and critique are very welcome !
Best regards,
Francis

 

 

Simply beautiful Francis! Just today I was thinking to myself, why hasn't a replica been made in this gorgeous material and how it would look. My curiosity has been satisfied.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Announcements


  • Most Contributions

  • Upcoming Events

  • Blog Comments

    • Misfit
      Oh to have that translucent pink Prera! @migo984 has the Oeste series named after birds. There is a pink one, so I’m assuming Este is the same pen as Oeste.    Excellent haul. I have some Uniball One P pens. Do you like to use them? I like them enough, but don’t use them too much yet.    Do you or your wife use Travelers Notebooks? Seeing you were at Kyoto, I thought of them as there is a store there. 
    • A Smug Dill
      It's not nearly so thick that I feel it comprises my fine-grained control, the way I feel about the Cross Peerless 125 or some of the high-end TACCIA Urushi pens with cigar-shaped bodies and 18K gold nibs. Why would you expect me or anyone else to make explicit mention of it, if it isn't a travesty or such a disappointment that an owner of the pen would want to bring it to the attention of his/her peers so that they could “learn from his/her mistake” without paying the price?
    • szlovak
      Why nobody says that the section of Tuzu besides triangular shape is quite thick. Honestly it’s the thickest one among my many pens, other thick I own is Noodler’s Ahab. Because of that fat section I feel more control and my handwriting has improved. I can’t say it’s comfortable or uncomfortable, but needs a moment to accommodate. It’s funny because my school years are long over. Besides this pen had horrible F nib. Tines were perfectly aligned but it was so scratchy on left stroke that collecte
    • stylographile
      Awesome! I'm in the process of preparing my bag for our pen meet this weekend and I literally have none of the items you mention!! I'll see if I can find one or two!
    • inkstainedruth
      @asota -- Yeah, I think I have a few rolls in my fridge that are probably 20-30 years old at this point (don't remember now if they are B&W or color film) and don't even really know where to get the film processed, once the drive through kiosks went away....  I just did a quick Google search and (in theory) there was a place the next town over from me -- but got a 404 error message when I tried to click on the link....  Ruth Morrisson aka inkstainedruth 
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...