Jump to content

What is the best scratch free material a pen is made of ?


goodguy

Recommended Posts

What is the best scratch free material a fountain pen is made of ?

Is there such a material ?

Can a fountain stay scratch free under normal resonable home/office use ?

Respect to all

Link to comment
Share on other sites

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

  • tfwall

    3

  • FredRydr

    3

  • Escribiente

    1

  • goodguy

    1

Of course, YMMV, but...

 

My Lamy Safari has been thrown around quite a bit and doesn't look very bad at all. Looks quite nice, actually.

 

ABS Plastic.

 

 

Link to comment
Share on other sites

Maybe some kind of ceramic, but I can't help but think the higher the scratch resistence the more brittle it's likely to be.

We stomped on the terra-

Lord Buckley said that

Link to comment
Share on other sites

Any of those LE crystal pens that crop up occasionally. Though they are very shatter prone if mis-handled or dropped.

 

There is a post on here about how MB's goal is a high gloss finish, with the result that their "precious resin" is somewhat fragile.

Link to comment
Share on other sites

I've had some matt black uniball pens for more than 8 years that are in remarkably good condition though they have been treated with no respect. They seem to be in the polyethylene family of plastics. It isn't a hard material but I think what makes them tough is the flexibility. On the other hand acrylic scratches up, but it's easy to re-polish.

 

Tungsten carbide would be good for avoiding scratches. Rado makes watches of this that look very nice and stay that way for a long time. (Rado calls them scratchproof but I don't think anything is truly "proof".)

 

White plastics show scratches much less than dark plastics. Black is the worst. Marbled and swirled colors make scratches harder to see.

 

Link to comment
Share on other sites

What about the diamond coated MB limited edition that sells for $$$$$?

"Anyone who lives within their means suffers from a lack of imagination."

Oscar Wilde

Link to comment
Share on other sites

What about the diamond coated MB limited edition that sells for $$$$$?

Well obviously, if you've got a spare 100,000 USD. I think we can discount those as out of most FPNer's range.

Link to comment
Share on other sites

Precious Resin.

 

That is the point of that stuff, right? Shiny but also scratch resistant? The downside is the fracture.

Fool: One who subverts convention or orthodoxy or varies from social conformity in order to reveal spiritual or moral truth.

Link to comment
Share on other sites

I have yet to see a material that is entirely scratch resistant. If there were such a thing, I am not entirely sure I would want one. I like my pens to have character, and use marks help character to evolve.

Link to comment
Share on other sites

I have to agree with ceramic as a good candidate for surface hardness. Firability and brittleness are not so much of a problem with some modern ceramics.

And the end of all our exploring

Will be to arrive where we started

And know the place for the first time. TS Eliot

Link to comment
Share on other sites

If there were such a thing, I am not entirely sure I would want one. I like my pens to have character, and use marks help character to evolve.

 

Agreed. I think that the more beat up and used-looking a pen is indicative of the fact that it's a superb writer - my Pelikan 215 is rather scratched, has been dropped once (and it BOUNCED at least four times on concrete, twice on each end, before clattering to a stop..only problem was a bit of ink in the cap and the ends show evidence of having been dropped) from about 5 feet, and dropped from a lower height several other times, but the reason that's happened is because I only have one pen to use and it goes everywhere with me. If it sticks around until I can pass it on to a younger person, I want them to say "Wow, this guy used the (Potty Mouth) out of that pen - there must be a reason why it's still around."

 

And because the way I grew up, I had to learn to cherish the broken, beaten-up stuff because that's all that was available (mainly with music instruments in school)....we always said "yeah but THIS has more character."

Link to comment
Share on other sites

I would think an pen coated with urushi lacquer would be reasonably scratch free. One see finger prints on the pen, but these can be removed easily. Ruud

Link to comment
Share on other sites

Brushed stainless steel seems fairly resistant to average pocket-wear-- as seen in diverse Parker flighters and the Waterman Hemisphere I was using yesterday.

Ravensmarch Pens & Books
It's mainly pens, just now....

Oh, good heavens. He's got a blog now, too.

 

fpn_1465330536__hwabutton.jpg

Link to comment
Share on other sites

I have a Nakaya coated with urushi and in about three years of use, I cannot find any scratch at all. Then again, I'm equally careful with it as with my other pens, but within reason.

Link to comment
Share on other sites

What is the best scratch free material a fountain pen is made of ?

Reinforced concrete.

 

Fred

Who makes a pen from concrete?

 

Uniroyal. It worked so well for tires. Made them last a lot longer.

 

Fred

 

Link to comment
Share on other sites

My black precious resin seems to resist scratching very very well, and as mentioned in another thread, I don't baby the pen.

 

Fred

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now







×
×
  • Create New...