Jump to content

Platinum 3776 Century Grip Section


IndieNote

Recommended Posts

Hi!

I have watched and read a lot of reviews of the Bourgogne model and it is said that the threads on the grip section are not sharp, while that of Nice Pur are sharp. Some say threads on Bourgogne are a little sharp. So, I am confused. I am interested in Oshino (mostly), Bourgogne, Laurel green and Chartres Blue. So, could you all please share your thoughts and experiences on that?

 

Thanks in advance.

Edited by IndieNote
Link to comment
Share on other sites

  • Replies 18
  • Created
  • Last Reply

Top Posters In This Topic

  • Runnin_Ute

    2

  • Honeybadgers

    2

  • IndieNote

    2

  • MuddyWaters

    1

I didnt mind the threads on the Chartres Blue at all. What I didnt like was the step down from the barrel to the grip, which is the reason I sold the pen.

Link to comment
Share on other sites

Those pens are all injection molded, and can vary some from one another. I've had some that were sharper than others. When I find sharp threads in a plastic pen I just lightly sand them with very, very fine micromesh. Should you choose to do this, just be careful and don't sand any other part of the pen :).

Link to comment
Share on other sites

none of the threads on any of my six 3776's (black, chartres blue and bourgogne, multiples of each) are noticeably sharp.

 

They're all injection molded, so if one is sharp, it's not because of the color or model. just a minor manufacturing defect that you could contact platinum to warranty fix.

 

I wouldn't hold them ON the threads, but that's more because of the step than sharpness.

Selling a boatload of restored, fairly rare, vintage Japanese gold nib pens, click here to see (more added as I finish restoring them)

Link to comment
Share on other sites

They're all injection molded, so if one is sharp, it's not because of the color or model. just a minor manufacturing defect that you could contact platinum to warranty fix.

Are we sure it is a "defect", and not just a sign of a new (unworn) injection die?

Link to comment
Share on other sites

So, could you all please share your thoughts and experiences on that?

 

 

Sure. The threads on the plastic Platinum #3776 Century grip sections are not sharp in my first-hand and subjective experience, across our collection here which includes a Black Diamond, a Bourgogne, a (now sold) Chartres Blue, an Oshino, and two kanazawa-haku models.

 

Of course, the next individual may conclude that our Platinum pens have sharp threads, depending on his/her kinaesthetic sensitivity and frame of reference.

I endeavour to be frank and truthful in what I write, show or otherwise present, when I relate my first-hand experiences that are not independently verifiable; and link to third-party content where I can, when I make a claim or refute a statement of fact in a thread. If there is something you can verify for yourself, I entreat you to do so, and judge for yourself what is right, correct, and valid. I may be wrong, and my position or say-so is no more authoritative and carries no more weight than anyone else's here.

Link to comment
Share on other sites

I don't own any Platinum pens, but I've held a variety of the 3776 models in multiple colors and never found any of them to have sharp threads. I've actually yet to find any pen to have sharp threads. I guess I have a high tolerance for sharpness? Maybe I hold my pen lightly enough that they just don't bother me? Who knows...

Link to comment
Share on other sites

It might also depend where you hold the pen while writing. I tend to hold high and very often that can be right on the threads or just above where they begin. This means I can find some threads quite annoying but havent had that experience with Platinum.

Link to comment
Share on other sites

Are we sure it is a "defect", and not just a sign of a new (unworn) injection die?

 

If it's sharp enough that it cuts uncomfortably, than I'd argue that the die was cut too sharp and it's putting out unsatisfactory threads (which I would argue would be defective)

 

You're right that there can be some variance there, but you could accommodate the die in its early stages by just running the threads on a buffer to knock down the edge for the first hundred or so pieces.

Selling a boatload of restored, fairly rare, vintage Japanese gold nib pens, click here to see (more added as I finish restoring them)

Link to comment
Share on other sites

I don't find the threads on my Borgogne sharp at all.

Brad

"Words are, of course, the most powerful drug used by mankind" - Rudyard Kipling
"None of us can have as many virtues as the fountain-pen, or half its cussedness; but we can try." - Mark Twain

Link to comment
Share on other sites

.

Edited by Runnin_Ute

Brad

"Words are, of course, the most powerful drug used by mankind" - Rudyard Kipling
"None of us can have as many virtues as the fountain-pen, or half its cussedness; but we can try." - Mark Twain

Link to comment
Share on other sites

  • 2 weeks later...

My 3776 Century Bourgogne just arrived today from Japan. The box within a box is very nicely done. Really like the soft tension just before it screws tight / just as you start to unscrew - reminding me of my Pelikan 140. Got a soft fine and will ink her up for a test drive here soon.

 

nScLNMx.jpg

Link to comment
Share on other sites

I have quite a few 3776s including Nice Pur, Chartres, and Lilas. I'm not aware of sharp threads on any of them and the step down doesn't bug me, though pens with a really pronounced step do often annoy me considerably.

 

What *does* bug me is that they're choosy about inks. I always now use wet inks with them for the best writing experience - but then I'm the kind of person who likes nibs wet - the close to a firehose the better. So YMMV.

Too many pens, too little time!

http://fountainpenlove.blogspot.fr/

Link to comment
Share on other sites

I have a Chartres Blue, but I'm afraid my reaction to this issue won't be much help, my kinaesthetic sensibilities are quite dull, apparently -- I have never yet been bothered by threads or stepdowns while I'm writing.

Link to comment
Share on other sites

On my "Black Diamond" (a translucent black version of the #3776 Century, with Broad cursive italic), the threads don't seem sharp. But I got it used so they could have been smoothed a little just from wear.

 

I also used to own the black one (Soft Fine), the red translucent one (Medium), as well as the Nice Pur (Fine-Medium).

Edited by KBeezie
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now







×
×
  • Create New...