Jump to content

Mini Review - Lamy cp1


plipule

Recommended Posts

Just got this Lamy cp1. "Platinum coated" as it says on the little tag attached. It is a nice slim pen weighing a fraction more than my Lamy 2000 (24g as opposed to 22g). As I got it from a real bricks and mortar (department) store it is a medium nib. It seems to be the same 14K gold nib that the Studio Palladium carries. I have always liked that thin gold edge to the slit. But now I finally have one for myself I have ruined it by inking it with legal lapis. As you can see from the picture below, nib creep reigns!

 

The nib is just what you would expect from a medium gold Lamy nib. Very smooth with good ink flow and no skipping at all. The only slight gripe I have with the pen is that the lid has a very tight fit, and because it is so slim it has to be slid on quite carefully. And tugged quite hard to get it off. But that would presumably be a plus point if I carried it around by the clip. Which I don't.

 

Oh, and another one - the platinum coating is a bit prone to showing greasy prints, although it polishes up nicely and very easily.

 

I am very pleased with it. It is neat and pretty and very shiny (dare I say it) a bit girly. But most importantly it is a delight to write with, as Lamy gold nibs always are. I havered for ages over the studio palladium, and I think I am glad I got this instead. I have quite small hands and it suits me a bit better than the studio shape.

 

Oh yes, apologies for the not very good picture - photography isn't my strong point.

 

Edited to add apologies!

Edited by plipule

<span style='color:purple'>George

UK</span>

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Maja

    2

  • plipule

    2

  • Taki

    1

  • HDoug

    1

Top Posters In This Topic

Nice! Simple and elegant; functional yet stylish. I've been interested non-black cp1 but the don't seem to sell cp1's here or online. Where did you get yours?

 

Doug

Link to comment
Share on other sites

I heard the pen should be available in Canada pretty soon. How much did you pay for it?

 

Thanks for the review, I cannot wait to get one.

 

Samovar

Link to comment
Share on other sites

QUOTE
Where did you get yours?

 

Well, The Writing Desk sell them online, but I actually succumbed to impulse in Fortnum & Masons. I happened to be at a conference at Burlington House with no lunch supplied and it just came over me. I must admit I hadn't seen one in the metal before. I feel very guilty about it all blush.gif

 

As far as cost is concerned, I paid £102 which is pretty average I think over in what the tabloids call "rip-off Britain". But it seems reasonable to me. But as always I try not to dwell on cost!

<span style='color:purple'>George

UK</span>

Link to comment
Share on other sites

Thanks for the nice review and photos (it's hard to take pictures of very shiny pens--don't worry, you're way better at it than I am wink.gif ).

 

I have a matte black Lamy cp1 but mine has a steel nib. The cap posts nicely onto my pen with a satisfying little "click" and it holds on well (much more secure than the slightly wobbly way in which my Rotring 600 posts rolleyes.gif )

 

The nib on my cp1 has a nice blob of iridium and the pen writes well but can be a tad hard-starting. I haven't tried it with more than a couple of types of ink so it may be a matter of finding the best ink for the nib and feed. Also, I think nib-unit may need to be soaked overnight. The pen looks practically new and I got a swell deal on it---less than $2.00 (late correction: less than $3.50---still a good deal wink.gif ) at an antique shop a few years ago. Mind you, it has a steel nib, but I see the pens selling $54+ onwards online...

Edited by Maja
Link to comment
Share on other sites

  • 2 weeks later...

Little follow-up on my cp1 and its starting-up "issues".... I removed the nib (by gripping it with a wide rubber band and pulling it straight out---the feed remained attached to the section, which was fine)...and cleaned out the feed channels using a bit of exposed film stock. I rinsed off the nib and feed and when I put them back together, the pen wrote *much* better....

Edited by Maja
Link to comment
Share on other sites

Hi Maja - thanks for posting your tip on nib removal on the CP1. smile.gif I'm glad to hear that you got the ink flow issue squared away.

 

I have a white enamel CP1 with a broad nib -- it's actually more like a double broad, a bit thicker than I like. It's great for writing large signs, though! wink.gif

[MYU's Pen Review Corner] | "The Common Ground" -- Jeffrey Small

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now







×
×
  • Create New...