Jump to content

Help Identifying a tiny pen!


SeaJay

Recommended Posts

Hi,

 

New poster here so hopefully nothing here breaks any rules.

 

Pictures are here via an imgur album

 

I recently picked up this pretty little Wahl Pen. It was listed as a Lady sized Doric (and I didn't quite realise just how tiny the pen was!). Its in a green marble celluloid (I assume), it measures in at a little over 3.5" capped and 3.5 uncapped, has a screw cap and the rear ~half of the pen unscrews to reveal a nipple and breather tube.

 

The nib definitely needs a little work un-springing and likely a little smoothing too. I'm not too sure what the filling method is either, the back of the pen unscrews to reveal a small nipple with (what I think is) the remnants of an old sac and a breather tube.

 

I'd very much appreciate any help, advice or ideas on what model of pen it is, the filling method (I was thinking it was maybe an early style aerometric type filler squeezing the small sac to fill the body with ink?), and whether the nib/feed are easily removeable. If anyone wishes to recommend a repair person I'm UK based so I'd probably prefer to keep it on the continent for now.

 

Thanks in advance for any help or ideas.

 

 

 

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • SeaJay

    2

  • joss

    1

  • jonveley

    1

Top Posters In This Topic

Hi, welcome on FPN!

 

Your little Wahl pen is an Eversharp Bantam with the 'bulb' filling system. It can be dated to the mid to late 1930s. The pen had a rubber sac that could be compressed manually to fill it with ink.

Richard Binder wrote an excellent profile of these pens: http://www.richardspens.com/ref/profiles/bantam.htm.

 

Link to comment
Share on other sites

Thanks Joss!

I'd seen reference to Bantams a few times, I think I even saw Richard Binders page you linked but since I didn't see the faceted body I didn't make the connection, whoops haha.

 

Would I be correct in thinking gentle heating the section will allow it to be removed making it possible to clean the inside of the pen? And any idea if the nibs are friction fit, require a tool or are not removeable at all?

 

That should make working out how to go about repairs much easier, I'll definitely give the Richard Binder page a read and go from there! 

 

Edited by SeaJay
couple extra questions
Link to comment
Share on other sites

  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33582
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26771
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...