Jump to content

Sheaffer PFM III clip removal

probablyobsessedwithpenstuff

By probablyobsessedwithpenstuff
in Repair Q&A

 Share

Recommended Posts

probablyobsessedwithpenstuff Dipped Only

probablyobsessedwithpenstuff

Posted
Posted

Is it possible to remove the clip from a pfm III.

 

The cap was cracked and I have repaired the crack using a solvent weld I found was recommended on here a few years  ago. Now I need to smooth the repair so its less visually ugly but it is very near to the clip so Id like to remove it as the plating is still in good condition.

 

Also the cap has been attacked by a previous restorer who drilled out the end of the inner cap, presumably to try and make the clip less wobbly or because it corroded badly. Im planning to fix that with the tip of an imperial I inner cap. Anyway, this cap has no imprints at all, not a trace was this from factory, possibly a defect? or did the previous owner also attack this part of the cap. The nib says made in USA and the AUS nib I have doesn't fit the barrel threads as well which supports this being a US pen. The trim ring is also good so it would have to have been protected to keep the plating in tact if they sanded the markings off. Secondly the micro surfaces scratches are very constant across the hole pen so I don't think they have been removed. Any thoughts on this would be interesting.

 

thanks for any help!

image0 (1).jpeg

image1.jpeg

Link to comment
Share on other sites
  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

  • probablyobsessedwithpenstuff

    1

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33559
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26744
    5. jar
      jar
      26101

  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      Links to web pages or articles about Chinese typesetting, signwriting, etc.

      By Shanghai Knife Dude · Posted

      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      Skeleton of a primer for a budding hobbyist

      By A Smug Dill · Posted

      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Skeleton of a primer for a budding hobbyist

      By adamselene · Posted

      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Skeleton of a primer for a budding hobbyist

      By A Smug Dill · Posted

      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      Skeleton of a primer for a budding hobbyist

      By adamselene · Posted

      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o

  • Chatbox

    You don't have permission to chat.
    Load More

  • Files






×
×
  • Create New...