Jump to content

I lubricated the piston of my M205 Custom today


pitonyak

Recommended Posts

I purchased my first Pelikan pen, an EF Classic M205 Demonstrator Special Edition, around September 2019. In 2019, The Central Ohio Pen Club created two custom inks and I loaded my pen with "Park of Roses", a rather interesting red ink. Normally I do not care for red ink, but I found this interesting. 

 

When the Covid lockdown hit, that particular pen was set aside and forgotten until a few days ago. I should have cleaned it before putting it away. Bad me. So, after soaking (and similar steps), the plunger is really tight. So tight, it is almost unusable. That was very scary to me. I am not a "take my pen apart" kind of guy. I am usually pretty handy, but, this is an expensive pen (in my mind) and I really like it, and I did not want to mess it up. 

 

I managed to find these links:

https://thepelikansperch.com/2014/08/30/how-to-lubricate-a-pelikan-piston/

https://thepelikansperch.com/database/frequently-asked-questions/

https://thepelikansperch.com/2014/11/22/changing-pelikan-nib/

 

I had the silicon, but I have to admit that I was apprehensive about unscrewing that nib. Although I expected a fight, that nib twisted right out with almost no resistance. I put just a wee bit of silicon on a toothpick; frankly, I expected it was too little and would have no effect. I then carefully put it as close to the plunger as I could. 

 

All said and done, that was really easy and the plunger now is very smooth. 

 

I Loaded it with a Pelikan ink, Tanzanite. Will see how it goes. 

 

Link to comment
Share on other sites

  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

  • Bo Bo Olson

    3

  • PaperDarts

    2

  • Ron Z

    1

  • chromantic

    1

2 hours ago, pitonyak said:

I purchased my first Pelikan pen, an EF Classic M205 Demonstrator Special Edition, around September 2019. In 2019, The Central Ohio Pen Club created two custom inks and I loaded my pen with "Park of Roses", a rather interesting red ink. Normally I do not care for red ink, but I found this interesting. 

 

When the Covid lockdown hit, that particular pen was set aside and forgotten until a few days ago. I should have cleaned it before putting it away. Bad me. So, after soaking (and similar steps), the plunger is really tight. So tight, it is almost unusable. That was very scary to me. I am not a "take my pen apart" kind of guy. I am usually pretty handy, but, this is an expensive pen (in my mind) and I really like it, and I did not want to mess it up. 

 

I managed to find these links:

https://thepelikansperch.com/2014/08/30/how-to-lubricate-a-pelikan-piston/

https://thepelikansperch.com/database/frequently-asked-questions/

https://thepelikansperch.com/2014/11/22/changing-pelikan-nib/

 

I had the silicon, but I have to admit that I was apprehensive about unscrewing that nib. Although I expected a fight, that nib twisted right out with almost no resistance. I put just a wee bit of silicon on a toothpick; frankly, I expected it was too little and would have no effect. I then carefully put it as close to the plunger as I could. 

 

All said and done, that was really easy and the plunger now is very smooth. 

 

I Loaded it with a Pelikan ink, Tanzanite. Will see how it goes. 

 

Welcome to the club of Pelikan owners! It is not a particularly elite club, but your experience is one to which many Pelikan owners here, I am sure, can relate. Well done with the lubrication!

 

I recently bought a brand new M600 from a reputable dealer, and upon receipt, I noticed that the piston was somewhat stiff. The first thing I did was to give the pen a good cleaning, only to find out that not only had the pen been inked, it was not cleaned before being re-boxed. Yes, I was a bit miffed, but I chalked it up to a one-time error on the part of the vendor and left it at that.

 

So after a good cleaning, I re-lubed the piston, using the same toothpick method, and it does work splendidly. The piston function is now smooth and reliable.

 

Edelstein Tanzanite is, IME pretty tame. I kept it in a 2012 M200 Demonstrator for well over a year (just refills, no cleaning in-between), and the ink cleaned out wonderfully (getting any ink out from under the lip of the section notwithstanding, which was a pain, but also works using the method described by sargetalon in his how-to blogs), with absolutely no staining.

Link to comment
Share on other sites

I sometimes find piston pens to get a tiny bit stuck after sitting unused for a long time. For this reason I've started storing the piston knob a bit unscrewed on the theory that I could then "rock" the piston in either direction if needed to free it.

...............................................................

We Are Our Ancestors’ Wildest Dreams

Link to comment
Share on other sites

Nice tip.....:thumbup:

In reference to P. T. Barnum; to advise for free is foolish, ........busybodies are ill liked by both factions.

 

 

The cheapest lessons are from those who learned expensive lessons. Ignorance is best for learning expensive lessons.

 

 

 

Link to comment
Share on other sites

Congrats. Now we'll have to show you the secret handshake.

It's hard work to tell which is Old Harry when everybody's got boots on.

Link to comment
Share on other sites

Rick Papas...the Pelikan Guru, said a Pelikan need not normally be lubricated more than every three-four years.

 

Some folks want to lubricate too much. I've many piston Pelikans, and am sure I lubricated one last year, or the year before. I know I lubed a couple-3-4?,  I've had for over 10 years, some time @ 5 years ago.

Still going strong.

It is not one should not lube, but there is seldom a reason to do it regularly......once every 3-4 years or every decade. :happyberet:

In reference to P. T. Barnum; to advise for free is foolish, ........busybodies are ill liked by both factions.

 

 

The cheapest lessons are from those who learned expensive lessons. Ignorance is best for learning expensive lessons.

 

 

 

Link to comment
Share on other sites

The only thing that I would change is to use a cotton swab instead of a toothpick.  A toothpick puts way too much grease in the barrel.  I often find blobs of  silicone grease in a barrel, which will wash off into the ink.

 

Twist the swab to wrap the fibers a little tighter, and just touch it to the silicone grease.  You only need a little bit.  With the grease up, insert into the barrel, rotate the barrel to distribute the silicone grease.  Work the piston up and down a few times, and you will feel it loosen up. 

spacer.png
Visit Main Street Pens
A full service pen shop providing professional, thoughtful vintage pen repair...

Please use email, not a PM for repair and pen purchase inquiries.

Link to comment
Share on other sites

Well done. Now you have a bird, more will follow!

 

I use a cotton swab as well, quite handy. It is  fun to maintain the pens and swap the nibs.

Link to comment
Share on other sites

I've got exactly this problem with one of my M205 pens, and now I know exactly what to do - thanks, all!

"Life would split asunder without letters." Virginia Woolf

Link to comment
Share on other sites

  • 2 months later...

In my experience you should only treat your pens with a complete maintenance scheme when the first signs of 'stiffness' arrive: lubricate the piston after a complete and thorough cleaning.

 

The second most important cleaning should be done after changing inks of different colors and it includes using a tiny amount of liquid soap; the regular maintenance should only be flushing the pens with regular water...

 

 

Link to comment
Share on other sites

"""the regular maintenance should only be flushing the pens with regular water... """

Can use a rubber bulb syringe to make that go faster.

In reference to P. T. Barnum; to advise for free is foolish, ........busybodies are ill liked by both factions.

 

 

The cheapest lessons are from those who learned expensive lessons. Ignorance is best for learning expensive lessons.

 

 

 

Link to comment
Share on other sites

Agree, I did this after cleaning the troublesome pen and it moves very smoothly now. Thanks again for the helpful advice.

"Life would split asunder without letters." Virginia Woolf

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...