Jump to content

Pilot Custom 845 Section Interchangeability


loganrah

Recommended Posts

Thinking about taking the plunge into Urushi pens, but I love my flex nibs too much. So Im wondering: is the section of a Pilot Custom 845 interchangeable with the section of a 742? I think they are the same size and since they are both CC pens I'm hoping I might be able to get a 845 and swap in the lovely #10 FA nib, in the section, I already have.

 

As a second question: am I right in assuming that the section of an 845 is just plastic, not urushi coated.

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • loganrah

    2

  • hari317

    1

  • Pens Woods

    1

  • GOTO10

    1

Top Posters In This Topic

I can only provide information about the section material - yes it is just plastic.

Link to comment
Share on other sites

I think they are the same size and since they are both CC pens I'm hoping I might be able to get a 845 and swap in the lovely #10 FA nib, in the section, I already have.

 

These Pilot pens are all urushi-coated and use size #10 nibs:

so — not that I recommend doing it at all, and besides, I personally detest the #10 FA nib — if you're prepared to rip the nibs out from the sections and swap them around, I'm sure they'll fit.

I endeavour to be frank and truthful in what I write, show or otherwise present, when I relate my first-hand experiences that are not independently verifiable; and link to third-party content where I can, when I make a claim or refute a statement of fact in a thread. If there is something you can verify for yourself, I entreat you to do so, and judge for yourself what is right, correct, and valid. I may be wrong, and my position or say-so is no more authoritative and carries no more weight than anyone else's here.

Link to comment
Share on other sites

Thinking about taking the plunge into Urushi pens, but I love my flex nibs too much. So Im wondering: is the section of a Pilot Custom 845 interchangeable with the section of a 742? I think they are the same size and since they are both CC pens I'm hoping I might be able to get a 845 and swap in the lovely #10 FA nib, in the section, I already have.

 

As a second question: am I right in assuming that the section of an 845 is just plastic, not urushi coated.

The sections of your 845 and 742 can be swapped. I would recommend a section level swap. Not a nib level swap. There is no urushi on the 845 section.

 

https://www.fountainpennetwork.com/forum/topic/101033-pilot-custom-743-vs-742/

 

https://www.fountainpennetwork.com/forum/topic/130941-pilot-custom-845-m/

Edited by hari317

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites

Awesome, thanks Hari. Now to wait until someone has a vermilion 845 on sale...

Link to comment
Share on other sites

My 845 is fitted with a #15 FA nib. Does that make difference? You folks are talking about a #10 nib and section .

There are a thousand thoughts lying within a man

that he does not know until he takes up his pen to write.

Thackeray

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33582
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26771
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...