Jump to content

The Taperite Nib And Feed...blotting Ink


Bristol24

Recommended Posts

I recently purchased my first vintage Waterman's fountain pen... a Taperite Crusader. I bought it for next to nothing but have a significant amount of time invested in it just getting the section out of the pen. We're talking about long soaks in water with a little Dawn detergent, ultrasonic baths, and of course heat. This was done over several days with me giving up numerous times rather than to risk breaking the pen. What finally produced the slightest movement of the section was my decision to wiggle the heated joint side to side, rather than just up and down. I got a sudden little "crack" sound causing me to think that I had broken the pen but then I noticed that the section was slightly askew to the left. Reheating and applying pressure in the opposite direction suddenly released the section. After giving the released section, nib, and feed an ultrasonic cleaning, I installed a new sac, loaded the pen with some ink and was pleasantly surprised with how smoothly it writes. Unfortunately, it also manages to blurb an ink blot now and then. I've tried several inks and some seem to work a bit better than others but eventually, either a small drop of ink begins to appear at the nib's vent hole or (worse) a larger drop forms hanging from the bottom of the feed.

 

What can be done with this? My thinking is that the feed is not allowing the free exhange of air for ink and that the only way to address the problem is to remove the nib and feed from the section. How in the world can that be done? The shape of the section precludes the use of a conventional knock out block. Does the nib push back through the feed in the opposite direction? Or, is there some sort of custom knock out block that must be used? Anything that can properly support the section would have to be tapered which would make the section a wedge being driven into the block. Does anyone have experience with this issue and can enlighten me on how to fix the ink blotting issue?

 

Thanks much,

 

Cliff

“The only thing most people do better than anyone else is read their own handwriting.”  John Adams

Link to comment
Share on other sites

  • 4 weeks later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • Sholom

    1

  • Bristol24

    1

Top Posters In This Topic

Sorry for the delayed reply. My Taperite Corinth doesn't blot unless I am a bit too vigorous waving it around but it does seem more prone to that sort of thing than my other pens. The feed designed is reputed to be rather simple/outdated for its time period. The nib on mine is great though. That aside, I would check that the sac is firmly attached. There is always a slight chance that the sac has a pinhole so you could try resaccing it. Taperites have a reputation for being rather prone to cracking under the hands of the inexperienced so I for one would not try knocking the nib out myself. Richard Binder was the Taperite guru but he doesn't do repairs anymore. I believe Ron Zorn and probably others will tackle them. Good luck.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33501
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26627
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...