Jump to content
Classifieds is broken, please do not submit any new ads ×

Montblanc Noblesse Oblige Feeder Change


Lawrizze
 Share

Recommended Posts

Hey guys,

 

I managed to ruin the feeder on one of my favorite Montblanc pens.

 

It is similar to this one:

 

https://arum24.es/product/montblanc-noblesse-oblige-raj1556/?lang=en

 

1) I have no experience in repairing pens. Would changing the feeder be a doable task for me?

 

2) What tools to I need? I can only find 146/149 - series remover tools on eBay. This is a 522 nib.

 

Thanks a load in advance!

/Law

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • bitterwonder

    1

  • CS388

    2

  • txomsy

    2

  • Lawrizze

    1

Yes, it's a do-able task, but there are two major obstacles to overcome:

 

1: Because the feed had a nipple to pierce the cartridge, you may need a special tool to knock it out, without harming the nipple. (However, if the feed you are removing is already broken, it may not matter if you just knock it out with a standard punch. The new feed is pushed into place without tools)

 

2: The biggest obstacle will be finding a replacement feed. You may be better off scouring the auction sites and classifieds for an old Noblesse being sold for parts. Other feeds may fit, but that would be a case of trial and error, until you find a suitable size.

 

Hope you can get it fixed. They're great pens.

Good luck.

Link to comment
Share on other sites

So, it is friction set, isn't it?

 

I thought that it was more complicated, kinda like in the meisterstuck where you need -AFAIK- special tools.

Link to comment
Share on other sites

My VP broad is a delight - and my stub good but havent broken it in like the B. Btw we aint all "guys".

Link to comment
Share on other sites

So, it is friction set, isn't it?

 

I thought that it was more complicated, kinda like in the meisterstuck where you need -AFAIK- special tools.

 

Yes. Ideally I'd always use the tool to remove the feed case in Meisterstucks. But, nibs and feeds are friction fit int the feed=case - sometimes, they can be pulled and replaced without removing the feed case.

 

This what I was suggesting the OP examine, if the feed is already trashed.

 

It's been a while since I had a Noblesse - But, as far as I can recall, the feed and nib will come out with a knockout block. I had a hollow punch which accommodated the cartrige piercing nipple. There may be a feed-case, screwed into the section, but it seems nibs and feeds can be removed without removing this.

 

As I say, I'm going from memory here. If other members have more concrete advice, I'm sure they'll chip in.

 

Thanks.

Link to comment
Share on other sites

  • 2 weeks later...

the nib / feed is friction fit

 

can be taken oiut with firm pressure between thumb pulp on nib and the knuckle of index finger on feed

 

but hat is the easier part - finding a replacement would be the real challenge

Enjoy your pens

Have a nice day

Junaid

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Most Contributions

    1. amberleadavis
      amberleadavis
      37779
    2. PAKMAN
      PAKMAN
      30892
    3. Ghost Plane
      Ghost Plane
      28220
    4. jar
      jar
      26101
    5. wimg
      wimg
      25594
  • Upcoming Events

  • Blog Comments

    • Matthew TWP
      @Ruaidhri This was an absolutely wonderful bit of writing, and I hope that you're able to maintain the style once all of the medications are out of your system.  Take care and recover quickly!
    • Dr.X
      Very punny daniel
    • danielfalgerho
      These comments make me sad as I sympathise with Ruaidhri, having great difficulties in being taken seriously. Or being taken at all (no off-colors jokes, please!) In spite of overwhelming odds,  Ruaidhri -now I know how to spell it- made a courageous decision and stuck to it. I was diagnosed with a similar growth in a place I will not reveal. Oh, well, if you insist it was Mount Sinai Hospital. But I firmly intend to walk in Ruaidhri's footsteps, if he will let me, on my next visit to Dublin.
    • ParramattaPaul
      Reminds me of the day my associates and I developed a cure for all mankind's ills and mistakenly wrote it down with invisible ink.
    • AnneD
      Was that the end of the Laboratory? Somehow the exactitude created a fully destructive device, as always!
  • Chatbox

    You don't have permission to chat.
    Load More
  • Expiring Soon

    • By benbot517
      51 years and 11 months
    • By benbot517
      51 years and 11 months
    • By benbot517
      51 years and 11 months
    • By Okami
      51 years and 11 months
    • By Okami
      51 years and 11 months
  • Random Adverts

  • Files

  • Today's Birthdays

    1. aebaxter
      aebaxter
      (40 years old)
    2. ahannover
      ahannover
      (57 years old)
    3. alienette
      alienette
      (41 years old)
    4. attercop
      attercop
      (31 years old)
    5. BananaArmy123
      BananaArmy123
      (33 years old)





×
×
  • Create New...