Jump to content
Classifieds is broken, please do not submit any new ads ×

Waterman Need Hepl


Waltz For Zizi
 Share

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • pen lady

    1

  • crescentfiller

    1

  • Waltz For Zizi

    2

  • sidthecat

    1

Top Posters In This Topic

Well, it appears to be a 452 1/2V Waterman. It is indeed a sterling overlay pen.

To find the approximate value, you might go to ebay and search using that description. You can click on "completed" or "sold" auctions to see what similar pens have sold for.

As for it being unrestored, it likely only needs a new sac, which will cost very little if you can do it yourself (a very, very simple repair).

 

Good luck!

Link to comment
Share on other sites

Well, it appears to be a 452 1/2V Waterman. It is indeed a sterling overlay pen.

To find the approximate value, you might go to ebay and search using that description. You can click on "completed" or "sold" auctions to see what similar pens have sold for.

As for it being unrestored, it likely only needs a new sac, which will cost very little if you can do it yourself (a very, very simple repair).

 

Good luck!

Thank you good man!

Link to comment
Share on other sites

$140 is a bit high for an un-restored pen. Small ring-tops are always cheaper than their full-size brothers. If you have large hands, it might not fit your hand too well. Posted it will be under 13 cm. long.

Link to comment
Share on other sites

I think it’s a good price for a pen with all the bits. It’ll clean up beautifully and you can wear it on a ribbon.

I would, however, put a dab of craft adhesive on the threads, because these things have a bad habit of unscrewing themselves and disappearing.

It’s a treasure...enjoy it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Most Contributions

    1. amberleadavis
      amberleadavis
      37978
    2. PAKMAN
      PAKMAN
      31121
    3. Ghost Plane
      Ghost Plane
      28220
    4. jar
      jar
      26101
    5. wimg
      wimg
      25602
  • Upcoming Events

  • Blog Comments

    • A Smug Dill
      @Texas42 Thank you. I myself have recently had the experience of cleaning out a Wing Sung 699, in which the iron-gall ink has been sitting for six months. No damage to the metal piston rod (whereas, in a Wing Sung 3013 vacuum-filler, it would have been corroded, turned green, and contaminated the ink in mere weeks), but there was a ring of colour at the far end of the barrel that wouldn't budge, and I found it impossible to unscrew the filling mechanism to clean the interior wall of the ink rese
    • Texas42
      Dang. You are a great friend!   One comment as a relative newcomer would be within the cleaning section: issues/differences in cleaning vacuum filler, piston filler in addition to cartridge/converter. I just cleaned out my Pilot 823 and while it wasn't particularly difficult I was a little paranoid about the drops of water that I could not get out. Perhaps this is something you are already including.   Anyway, great project and very thoughtful of you. I know it's a project fo
    • Splat
      Ah Ruaidhri ya wee heid banger, you do indeed have an Irishman’s way wid dose words now. I’ll be from outer Aberdeenshire up in the blizzard riven braes of the Grampians.  Amateur medicine and surgery is it? Well what noble aspirations you do possess, we need to encourage such noble experimentations.  I pondered on leaving my own battered shell to science, but, until I read your pearls of wisdom and lament, I had comedown on the side of leaving my body to Findus frozen foods.  However, your rema
    • austollie
      Hi Smug Dill,   Nice project.  If it were me, I'd cover stuff like: - nib types available, i.e. styles, materials (SS vs gold), flex vs nails; - filling systems (I love the "thingie" comment) and how once can use them in practice (e.g. fill cartridges with a syringe); - pen body materials and their consequences (pen not balanced of too heavy and big for the hand); - and, whilst you've made it clear that you do not like vintage pens, a discussion of these beyond "I d
    • A Smug Dill
      Thanks for your input! Yes, not putting wood in the list of body materials warranting a mention was an oversight. I love pens with wooden bodies, but my main concern, or chagrin, is that I have not come across a wooden-bodied pen with a wooden cap that seals well. Actually, there is one, but it isn't really wood per se: the Pilot Custom Kaede's maple body is resin impregnated. All other wooden pens I have can dry out while capped and undisturbed; that includes several Platinum #3776 models.
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files

  • Today's Birthdays

    1. autumnsong
      autumnsong
    2. brandon8602
      brandon8602
    3. CameronB
      CameronB
      (54 years old)
    4. cardehar
      cardehar
      (36 years old)
    5. cruisefor2
      cruisefor2
      (74 years old)





×
×
  • Create New...