Jump to content

How To Tighten Up A Loose Section


sundragon

Recommended Posts

Hello, I have a couple of older fountain pens Mabie Todd, Wahl, and Waterman that have loose sections. One is BCHR, the others are celluloid. The section with the nib and sac are loose and you can easily turn them in the body or worse they can slide out with a little pressure and or come off with the cap being unscrewed and get stuck in the cap.

 

I've read that in the olden days they used shellac but I don't want to make servicing the pen difficult. Especially on 70-90 year old pens that are now more brittle and delicate.

 

Would a drop of shellac vs shellacking the whole section that fits in the body firm it up?

 

What do you recommend?

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Chrissy

    2

  • sundragon

    2

  • pen lady

    1

  • siamackz

    1

Popular Days

Top Posters In This Topic

Shellac yes, but not the way you think. Paint a layer round the section and let it dry thoroughly, with any luck that extra thickness will hold things in place when you replace it in the barrel.

Link to comment
Share on other sites

Shellac yes, but not the way you think. Paint a layer round the section and let it dry thoroughly, with any luck that extra thickness will hold things in place when you replace it in the barrel.

This is very clever! Would this work on lose slip for hard rubber caps too? I have a Watermans No2 and No22 with lose caps. I have stuck scotch tape inside the cap, which helps make the fit right. But, I need to replace it every now and then. I am wondering if the shellac trick might work. Thoughts?

My Vintage Montblanc Website--> link

Link to comment
Share on other sites

This is very clever! Would this work on lose slip for hard rubber caps too? I have a Watermans No2 and No22 with lose caps. I have stuck scotch tape inside the cap, which helps make the fit right. But, I need to replace it every now and then. I am wondering if the shellac trick might work. Thoughts?

 

You would probably need a thicker layer in a cap, and it would wear off because of repeatedly putting the cap on and taking it off.

Link to comment
Share on other sites

the best advice is 'try it and see' - don't bathe the barrel threads in the stuff - just sufficient to create some additional substance. IMHO, personally I don't think I would try this - if the cap jams there's always the danger that too much force might be needed to free the cap, but if the pen has little value then no harm in having a go.

 

Am sure I remember previous threads on the subject of shellac being used to tighten a loose section to barrel join, and seem to recall it did have the seal of approval, although I always have this dread that the two parts will stick together too well. Knowing the problems experienced when trying to remove sections from old pens, where shellac had been used as a sealing compound - I'm worried this is stacking up future problems when wanting to replace a sac, for example .

Edited by PaulS
Link to comment
Share on other sites

Another direct hit for Pen Lady. Letting the shellac dry lets you add other layer if necessary.

 

In extreme cases, I've used (sparingly) a couple of tightly-stretched rounds of plumber's tape (non-adhesive), which lets you control the thickness and grabs well.

Link to comment
Share on other sites

Shellac yes, but not the way you think. Paint a layer round the section and let it dry thoroughly, with any luck that extra thickness will hold things in place when you replace it in the barrel.

 

That is awesome! Thank you. Didn't think of that. I will try and let update. I was afraid of having it stick because the hard rubber pens become more brittle as they age.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33474
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26573
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...