Jump to content

Recommended Posts

Practitioners of Copperplate and Engrosser's Script know that the spacing in these scripts is fairly 'automatic' i.e. things fall in place rather nicely when the exit hairlines are drawn correctly and meet the following letter at about halfway up the x-height. It is interesting to ponder exactly why that is so.

It turns out (no pun intended) that the bottom turns of the straight letters (i, t, l) etc are actually similar to the rounded letters (o, c, e). When drawn correctly, i.e. like the bottom right side of an 'o', exit strokes will be at the correct angle (i.e. match the slant) when they meet the following letter. What is even better is that the join won't be jarring even if the hairline meets the following letter a little bit below the halfway point - this typically results in an abrupt 'impalement' of the hairline into the following letter if the hairline is drawn a bit too shallow.

Here is an exercise I give my students. The following image shows the bottom halves of 3 words 'ice', 'lit' and 'tie' - can you tell which one is which?

 

fpn_1476907185__ice-tie-lit-hidden.jpg

(you can see the whole image here)

 

The challenge is to write these three words and see if the bottom halves give them away. I will be looking forward to your participation.

 

- Salman

Link to post
Share on other sites
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • smk

    3

  • Cyber6

    1

  • Randal6393

    1

Top Posters In This Topic

That's cheating... I tried looking behind my screen.. but there was nothing.... :(

 

I also tried flashing a strong light to my screen... but couldn't see the "ghosting" on the letters... :P

 

 

HA!!... very good Salman... I couldn't tell if my life depended on it... :D :D

 

 

 

C.

fpn_1481652911__bauerinkslogo03.jpg
**** BauerInks.ca ****

**** MORE.... Robert Oster Signature INKS ****

**** NICK STEWART - KWZI INKs TEST ****

"The greatest enemy of knowledge is not ignorance, it's the illusion of knowledge." -Stephen Hawking,

Link to post
Share on other sites

Great job, Salman. In terms of recognizing letters, almost any script is written so that the top half of the lettering is more critical in recognizing a letter than the bottom half. Doesn't just apply to Copperplate.

 

Enjoy,

Yours,
Randal

From a person's actions, we may infer attitudes, beliefs, --- and values. We do not know these characteristics outright. The human dichotomies of trust and distrust, honor and duplicity, love and hate --- all depend on internal states we cannot directly experience. Isn't this what adds zest to our life?

Link to post
Share on other sites

Great job, Salman. In terms of recognizing letters, almost any script is written so that the top half of the lettering is more critical in recognizing a letter than the bottom half. Doesn't just apply to Copperplate.

 

Enjoy,

 

The point of this exercise is not about recognizing letters but to illustrate that the bottom turns of both straight and rounded letters are the same i.e. you can't tell the bottom of an 'i' from that of an 'e' (as in 'tie').

 

Clearly the bottom halves of 'i' and 'e' in Itlaic or Batarde are different - you might not be able to tell and 'e' from an 'o' but you can identify the round letters. Even in Blackletter Quadrata (made up mostly of minims and lozenges) you can tell the bottom of the 'e' and 'o' are different than that of an 'm' or an 'n'.

 

I hope this clarifies the exercise and my reason for sharing it.

 

- Salman

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      37512
    2. PAKMAN
      PAKMAN
      30209
    3. Ghost Plane
      Ghost Plane
      28220
    4. jar
      jar
      26101
    5. wimg
      wimg
      25570
  • Upcoming Events

  • Blog Comments

    • A Smug Dill
      Even so, you'd end up with a fragmented list, and it becomes an O(N²) process for each prospective requestor to check what is available: effectively recreate the list of currently active servers (without any reliable up-to-date info upfront about the inks and number of samples on offer in the thread) from the sequential list of posts, which may be spread over two or even more pages, and then query each server independently to check what is currently on offer.   It comes down to not hav
    • LizEF
      If one wanted to do this, one could just use the "About Me" field which appears to be unlimited in size.  And if a bunch of people wanted to cooperate, the Member Title field (or signature) could be used to this end - "Ink Giver" (or some such) could be used by those with inks to give...  No software edits required.
    • Arkanabar
      I suppose the update issue could be mitigated.  One would post a link in signature, to the particular part of your profile where you list the inks that you're willing to post samples to others, gratis.  But looking at profiles, I suspect that would require an edit to the board's software, potentially a nontrivial task.
    • A Smug Dill
      I read your idea as getting willing givers to publicly register as members of a set of heterogenous servers, in a system in which a client would explicitly select an available server from a list, to which he/she will then send a request privately and asynchronously. Request handling in the system is unmanaged, and individual requests are handled by the targeted servers completely independently on each other. I think the model is fine, although there are some operational concerns you may want to
    • Daneaxe
      First thought on the method/system of ink sharing: Think the best way, to begin with, is to follow the way of the US thread: offer up a (small) list of inks you are willing to PIF, to whoever expresses interest. Write clearly in the "mission statement" how it works, with a tiny "quid pro quo" that even a struggling student can comply with, i.e. post your opinion and a writing sample, with option of a full review if desired.   So yours truly might say: "I'm offering up samples of D
  • Chatbox

    You don't have permission to chat.
    Load More
  • Expiring Soon

    • By benbot517
      51 years and 5 months
    • By benbot517
      51 years and 5 months
    • By benbot517
      51 years and 5 months
    • By Okami
      51 years and 5 months
    • By Okami
      51 years and 5 months
  • Random Adverts

  • Files

  • Today's Birthdays

    1. bdanh1989
      bdanh1989
      (32 years old)
    2. Breandan
      Breandan
      (81 years old)
    3. brucezarat
      brucezarat
      (34 years old)
    4. ClassicBlack
      ClassicBlack
    5. coyote
      coyote
      (60 years old)





×
×
  • Create New...