Jump to content

Comparison Of Platinum #3376 & Platinum President


sandy101

Recommended Posts

I'm thinking of purchasing a Platinum next and I cannot decide whether to go for the #3776 and the President. I'm just wondering if anyone had any experience of both pens to be able to offer a comparison.

 

Whilst I can appreciate that one has the slip & seal and the other doesn't, I only tend to use washable inks, so it is not such a big deal for me.

 

If anyone has had both, and could offer an opinion then I would be grateful. What's the difference between the 14k and 18k nib? I'll probably go for the medium, as I like the line on my other Platinum medium.

Link to comment
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

  • jar

    5

  • masao

    5

  • A Smug Dill

    4

  • sugna

    3

Top Posters In This Topic

I have both the new and older #3776s and also the President and Modern Platinums. I'll try to get some pictures of all of them tomorrow. In the meantime here is a start. Should I include the Izumo in the comparison as well?

 

http://www.fototime.com/9B954EE4231BDC9/large.jpg

 

My Website

 

Link to comment
Share on other sites

Thank you for the pictures, jar. The Izumo is way out of my budget.

 

 

I have the Herons flying over Mt Fuju modern Make-I. It's got an 18K nib which I find slightly springy - which is a pleasure to use.

 

The question is - is there a significant difference between the #3776 and the President, apart form the price?

 

In the UK the #3776 is £99, and the President is £125.

 

There's lots of reviews of the #3776, and not a lot about the President - and no comparisons. From what I've read the #3776 is slightly smaller, and the medium nib is stiff. How does the President compare? I've been told the nib in the President is the same as the ones they use in the Nakaya pens, but without any information about how this nib performs, it makes a comparison difficult.

Link to comment
Share on other sites

Thank you for the pictures, jar. The Izumo is way out of my budget.

 

 

I have the Herons flying over Mt Fuju modern Make-I. It's got an 18K nib which I find slightly springy - which is a pleasure to use.

 

The question is - is there a significant difference between the #3776 and the President, apart form the price?

 

In the UK the #3776 is £99, and the President is £125.

 

There's lots of reviews of the #3776, and not a lot about the President - and no comparisons. From what I've read the #3776 is slightly smaller, and the medium nib is stiff. How does the President compare? I've been told the nib in the President is the same as the ones they use in the Nakaya pens, but without any information about how this nib performs, it makes a comparison difficult.

Actually Nakaya uses the nib that is in the #3776; the 14K nib. I find the Modern Maki-e nibs have the most spring; not really flex but soft in feel. The recent #3776 and President nibs are both much stiffer.

 

Here are some pictures I already had that may help.

 

First is a President, then an earlier #3776 and the Modern Maki-e.

 

http://www.fototime.com/47AE51576148167/large.jpg

 

As you can see, the President is both longer and wider than the early #3776.

 

Next, a picture that shows all three Platinums. The early #3776 is second from top, then a current Century #3776 and the Modern Maki-e at the very bottom.

 

http://www.fototime.com/8A4AFFCD49207E0/large.jpg

 

Note that the #3776 Century is shorter than the earlier #3776.

 

Here you can see them capped with the Modern Maki-e at the top, the #3776 Century third from the top and the earlier #3776 at the very bottom.

 

http://www.fototime.com/F0CEADE6FD41861/large.jpg

 

Capped there is not as great a difference in lengths as when uncapped and not posted.

 

Here is a review I did recently comparing the President and the Montblanc 147.

 

I hope this helps.

 

My Website

 

Link to comment
Share on other sites

While you may only use washable inks, don't underestimate the usefulness of that slip & seal mechanism in the cap. I have 4 Platinum Century #3776, and I did not originally appreciate the usefulness of that cap design. I have no concerns using nano pigments or other high maintenance inks because I know the pen can sit for a time, and those pens will immediately start up as if I just finished a fill. That mechanism, the lightweight of the Platinum pens, the great balance of the whole pen, the exceptional feedback on the nibs, and the comfortable width make the #3776 a nice pen that also serves as a true workhorse.

 

Unfortunately, I've never held or used a President.

 

Buzz

Link to comment
Share on other sites

  • 2 weeks later...

I just received a new President in yellow this morning with an EF nib. I went and compared to a 3776 and it is just a little longer and fatter than the 3776. I was expecting the EF nib to be a little scratchy, but it is very smooth.

Regards

 

Jeff

Link to comment
Share on other sites

I just received a new President in yellow this morning with an EF nib. I went and compared to a 3776 and it is just a little longer and fatter than the 3776. I was expecting the EF nib to be a little scratchy, but it is very smooth.

Yes,as I said.

P is smooth and 3776 is scratchy.

I come from Republic of China http://imageshack.com/a/img924/6433/wZUh69.jpg
Traditional Chinese is the most beautiful writinghttp://imageshack.com/a/img923/6879/t523ZV.jpg

Link to comment
Share on other sites

Yes,as I said.

P is smooth and 3776 is scratchy.

My #3776 nibs are not scratchy nor are my Nakaya nibs which are based on the #3776 nib. My President nibs are also not scratchy.

 

My Website

 

Link to comment
Share on other sites

This is my third President, and have several 3776 models, some celluloid, and all are smooth, absolutly no complaints about any. I even like the music nibs on some.

Regards

 

Jeff

Link to comment
Share on other sites

My #3776 nibs are not scratchy nor are my Nakaya nibs which are based on the #3776 nib. My President nibs are also not scratchy.

3776 above F nib is not not scratchy. ex:M or B etc.

I come from Republic of China http://imageshack.com/a/img924/6433/wZUh69.jpg
Traditional Chinese is the most beautiful writinghttp://imageshack.com/a/img923/6879/t523ZV.jpg

Link to comment
Share on other sites

This is my third President, and have several 3776 models, some celluloid, and all are smooth, absolutly no complaints about any. I even like the music nibs on some.

 

A little scratchy is necessary for Chinese character or Japanese character,but smooth is better for Western character.

That is why Japanese produce their own pens for writting.

Usually we use EF or F nib for writting. They are scratchy.

But we use M or B nib for signature. They are smooth.

I come from Republic of China http://imageshack.com/a/img924/6433/wZUh69.jpg
Traditional Chinese is the most beautiful writinghttp://imageshack.com/a/img923/6879/t523ZV.jpg

Link to comment
Share on other sites

A little scratchy is better in writting this kind of character:

http://www.cityu.edu.hk/lib/about/event/ch_calligraphy/regular_chi.htm

 

But a smooth nib is better in writtng this kind of character:

 

http://www.cityu.edu.hk/lib/about/event/ch_calligraphy/cursive_chi.htm

I come from Republic of China http://imageshack.com/a/img924/6433/wZUh69.jpg
Traditional Chinese is the most beautiful writinghttp://imageshack.com/a/img923/6879/t523ZV.jpg

Link to comment
Share on other sites

A little scratchy is better in writting this kind of character:

http://www.cityu.edu.hk/lib/about/event/ch_calligraphy/regular_chi.htm

 

But a smooth nib is better in writtng this kind of character:

 

http://www.cityu.edu.hk/lib/about/event/ch_calligraphy/cursive_chi.htm

 

I think you may be confusing "scratchy" with "feedbacky."

 

"Scratchy" is a sense that the tines are misaligned and feel like they're sticking to and grabbing into the paper (I suppose, can't say I ever experienced a scratchy pen). "Feedbacky" means there's some sound and it's not super-smooth, but you can still feel the paper with the pen.

 

My #3776 is feedbacky, but it's not scratchy.

Link to comment
Share on other sites

I own perhaps ten 3776's, and one President. Both are great pens, and I don't think you go wrong either way. They have a lot in common: excellent fit and finish; great writing performance (both smooth, finer nib sizes will have some feedback); and C/C filling system.

 

I agree with Buzz: the Slip & Seal is definitely a "pro" in the 3776 column. I have found these pens to be true workhorses.

 

I also agree with bizhe: at the end of the day, go with the one you think you'll enjoy looking at/holding the most. For me, it would be the 3776. I don't know why, but they just feel a little more substantial in my hand than the President (ironic considering that it's the flagship pen).

Link to comment
Share on other sites

  • 1 year later...

Sorry for the thread necromancy, but I've been researching the President lately. Some reviews say the "fit and finish is perfect," while others say the plastic is cheap-feeling and the cap wobbles and cross-threads. Is the QC on them bad or something? I really like the look of the burgundy one and was thinking about it.

 

I have a 3776 Century and while I like it, the nib on it is just a tad dry for my taste and always seems to get stained with ink no matter what ink I have in it. That's more of a cosmetic concern, but I was wondering if the extra $100 or so for a Celluloid 3776 is a better bet than going for a President.

Link to comment
Share on other sites

Sorry for the thread necromancy, but I've been researching the President lately. Some reviews say the "fit and finish is perfect," while others say the plastic is cheap-feeling and the cap wobbles and cross-threads. Is the QC on them bad or something? I really like the look of the burgundy one and was thinking about it.

 

I have a 3776 Century and while I like it, the nib on it is just a tad dry for my taste and always seems to get stained with ink no matter what ink I have in it. That's more of a cosmetic concern, but I was wondering if the extra $100 or so for a Celluloid 3776 is a better bet than going for a President.

Some folk complain, some folk don't. Some folk have different standards than other folk. YMMV really is true.

 

The wetness of a nib can be changed and changed pretty easily and inexpensively. I'm not sure where you are but there are great folk out there that can adjust wetness for you for about $25.00. Ink on a nib is pretty normal so don't worry about it and the material of the body will not influence that anyway.

 

My Website

 

Link to comment
Share on other sites

Sorry for the thread necromancy, but I've been researching the President lately. Some reviews say the "fit and finish is perfect," while others say the plastic is cheap-feeling and the cap wobbles and cross-threads. Is the QC on them bad or something? I really like the look of the burgundy one and was thinking about it.

 

I have a 3776 Century and while I like it, the nib on it is just a tad dry for my taste and always seems to get stained with ink no matter what ink I have in it. That's more of a cosmetic concern, but I was wondering if the extra $100 or so for a Celluloid 3776 is a better bet than going for a President.

 

I have a bunch of 3776s, including several celluloid models, as well as a President. My President doesn't exhibit any of the QC issues you mention, but IMO the plastic definitely feels less "expensive" than that used in the 3776s, or the celluloid used in the celluloid models. I got it via MassDrop with a monster C nib, which I later had ground to an architect nib, it writes beautifully and is lots of fun to use. It's hard to describe, but the plastic just seems to look "flatter" and less rich. Feels weird to talk about plastic in this way but, oh well...

 

I have had pretty good luck with the celluloid 3776s on eBay, most of them are earlier Japanese market models with 18k gold nibs and an extra scrollwork engraving around the nib, usually for a great price. I did have one bad experience: received the calico model only to find that several celluloid parts had shrunk so that the section barely screws into the barrel and the cap ring falls off.

 

Seeing as I own both, I'd say I prefer the celluloid (specifically, the tortoise). The material is very rich looking, and the pen feels like a high end pen in the hand. Both pens, however, are well made, and as jar says, both could be easily tuned to your liking if they don't write the way you like out of the box. There is also, as you mention, the issue of price, but I don't think the difference is as large. President's street price is around $190, and if I remember correctly I ordered my tortoise celluloid for around $230 from Japan.

Link to comment
Share on other sites

  • 1 month later...

Hello, can anyone please confirm whether nibs are interchangeable between the President and 3776 models?

 

Any help appreciated :)

✒️ :happyberet:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33501
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26627
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...