Jump to content
Classifieds is broken, please do not submit any new ads ×

Ink Flow And Scratchiness(No Disassembly Needed)

Pen Reviewer

Recommended Posts

Pen Reviewer

I'm new to FPN, but I've used fountain pens for a long time now and I'm prepared to help others. First lets get ink flow adjusted.[NOTE THAT THESE ACTIONS WILL MOST LIKELY VOID THE WARRANTY OF YOUR PEN. I REFUSE TO TAKE RESPONSIBILITY FOR THE BRAKING/ INEFFECTIVENESS OF YOUR PEN. YOU FOLLOW MY ADVICE AT YOUR OWN RISK]


You probably want to detach the nib if you can, as it is less likely to break if you do. Wash it and place it on a hard surface that is covered with a cloth or tissues. Place it wih the nib facing upwards and press down with your index finger until it splits down the middle(not breaking but split down the line that splits the tines). Hold for ten seconds then attach back to the feed. Rinse and repeat until satisfactory.


Next, the scratchiness. The main cause for scratchiness is misalignment. If you modified the ink flow, the alignment may be slightly off. Take off the nib and wash it(again). Then, grip the shoulders of the nib and look at it so that you see the tip of the nib. Push one of the times up or down until fully aligned.


With a non detachable nib, you can do the alignment with the same method. But for the ink flow press the nib against paper so it splits in the same fashion. Hold for ten seconds and rinse and repeat until satisfactory. Again, you may need to realign the tines.


Thanks for reading!

Link to post
Share on other sites
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • Pen Reviewer


  • tryphon


  • Freddy


  • kirchh


Top Posters In This Topic

Pen Reviewer

I don't agree with the need of removing the nib, nor with how you do that! More advice can be found here, the result of 40 years of collecting and working on fountain pens:



This is a way that is quick and easy to do. I have been doing this to countless pens and they work better than any way that others show in my opinion. I have helped others (friends, family etc.) and they say it improves the performance a lot. I bought a Parker Reflex and the scratchiness and dryness was unbelievable. After doing my method, it worked. Though you may be correct, the method I have shown has equal potential to the one in the link. I agree it may not be the most effective, but it is sufficient.
Link to post
Share on other sites

Fascinatin' Stuff....and Spooky....Ain't it...


And..Pen Reviewer....Welcome aboard....Enjoy your time here....



...glared at me like a viper about to strike a rodent

~ R. Emmett Tyrrell

Link to post
Share on other sites

I don't recommend this ink flow adjustment procedure.



"The greatest mental derangement is to believe things because we want them to be true, not because we observe that they are in effect." --Jacques-Bénigne Bossuet

Daniel Kirchheimer
Specialty Pen Restoration
Authorized Sheaffer/Parker/Waterman Vintage Repair Center
Purveyor of the iCroScope digital loupe

Link to post
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Most Contributions

    1. amberleadavis
    2. PAKMAN
    3. Ghost Plane
      Ghost Plane
    4. jar
    5. wimg
  • Upcoming Events

  • Blog Comments

    • halffriedchicken
      Not sure if this has been suggested already but would a setting for localized regions or chapters in FPN be helpful? I don't know if there is a way to find local FPN members who would be nearby. I don't know if we want to be discoverable but a setting to know how many members are in 25, 50, or a 100 miles of each other might be helpful. We can create a regions specific network like Craigslist where people could use that to connect with nearby members, conduct in person sales, arrange FPN meetups
    • Daneaxe
      Hi again all, I forgot to tell y'all that I made the post about Sweden ink PIF. Most have probably found it long ago, but here's a link, anyway:      
    • Ayami_109
      I read your blog post and all the replies with much interest. I'm a FP user in Australia. Been part of this forum for years but rarely post. I did come across your ink sharing thread and considered participation. For me it's not lack of interest but lack of time to play around with FP and inks. I'd feel bad to put my hand up for the box and just have it sit until gosh knows when...   I also think that the FP community in Australia is smaller, and I wonder how many in the community are
    • A Smug Dill
      Even so, you'd end up with a fragmented list, and it becomes an O(N²) process for each prospective requestor to check what is available: effectively recreate the list of currently active servers (without any reliable up-to-date info upfront about the inks and number of samples on offer in the thread) from the sequential list of posts, which may be spread over two or even more pages, and then query each server independently to check what is currently on offer.   It comes down to not hav
    • LizEF
      If one wanted to do this, one could just use the "About Me" field which appears to be unlimited in size.  And if a bunch of people wanted to cooperate, the Member Title field (or signature) could be used to this end - "Ink Giver" (or some such) could be used by those with inks to give...  No software edits required.
  • Chatbox

    You don't have permission to chat.
    Load More
  • Expiring Soon

    • By benbot517
      51 years and 6 months
    • By benbot517
      51 years and 6 months
    • By benbot517
      51 years and 6 months
    • By Okami
      51 years and 6 months
    • By Okami
      51 years and 6 months
  • Random Adverts

  • Files

  • Today's Birthdays

    1. amadeus06
      (35 years old)
    2. AppleheadMay
      (54 years old)
    3. Bladerunner
      (67 years old)
    4. Boveri
      (52 years old)
    5. civcivli
      (32 years old)

  • Create New...