Jump to content

... homemade journal ...


TMLee

Recommended Posts

Never say die ... rolleyes.gif

i am still bent on trying out an embossed cover of a lead-lined window ...

 

continuing the matching pair of journals bearing monogramed initials ...

and spurred on by a recent find of MacKintosh's typeface ...

 

I did some concept sketches of some window designs to try and match the typeface initilals ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4482.jpg http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4483.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4484.jpg http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4485.jpg

 

settled on this one ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4481.jpg

 

redrew the picture onto thin greyboard

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4480.jpg

 

and drew over the lines with a bullet tipped marker.

somehow the thickness of the marker line was just matching in size with the alphabets "LK"

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4489.jpg

 

I then proceeded to cut out the window ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4491.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4493.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4494.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4496.jpg

 

I had in mind to place the emboss on the rear cover bcos

the band closure (when deployed) will interfere with the embossed design if it were to be on the front cover...

This is what the journal will look like - opened and face down ...

The window needs to be off-centre to make way for the stitches ..

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4497.jpg

 

 

 

now with the "LK" cutout ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4502.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4501.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4503.jpg

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4500.jpg

 

Glued into position on the rear coverboard ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4509.jpg

 

I think I was too hasty , bcos now I have a problem - how to glue the bookcloth over ? blush.gif

The square cutouts, I think , are too tiny for the bookcloth to 'hug' the recesses perfectly ?

I dare not proceed now bcos I think it will be a problem... gaah.gif

will experiment on a dummy piece first ...

 

I was thinking if worse comes to worse, then I may just use plain fabric.

But its not as nice as bookcloth - the feel and the texture ...

 

How do I get the material to reach the recesses? hmm1.gif

Wet the bookcloth first ?

Any advice appreciated ...

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

  • Replies 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • TMLee

    1127

  • mhguda

    32

  • pen2paper

    23

  • Earthdawn

    20

Top Posters In This Topic

Posted Images

from #677 it appears there must be some flex/stretch to he book fabric?

how much "work" time do you have before the glue sets? can you give extra allowance (slack) at the edges? then work the stretch/slack INwards Towards the center, then adjusting back to the edge whatever slack remains? or is to Touch the fabric on to the board a One-shot commitment?

love the design.. the balance of the tight-multi-part upper area, more open area lower containing the initials is spot on! imho : )

Link to comment
Share on other sites

I don't know whether it would work, but have you tried a steamer? I suggest this because I think it could relax the fabric with heat and water without burning or ruining the nap. I haven't tried what you're doing so this is a thought, not a recommendation from experience.

Link to comment
Share on other sites

 

 

I think I was too hasty , bcos now I have a problem - how to glue the bookcloth over ? blush.gif

The square cutouts, I think , are too tiny for the bookcloth to 'hug' the recesses perfectly ?

I dare not proceed now bcos I think it will be a problem... gaah.gif

will experiment on a dummy piece first ...

 

I was thinking if worse comes to worse, then I may just use plain fabric.

But its not as nice as bookcloth - the feel and the texture ...

 

How do I get the material to reach the recesses? hmm1.gif

Wet the bookcloth first ?

Any advice appreciated ...

 

Hey, TM Lee! :)

 

If you use bookcloth (IF bookcloth can actually be used successfully in this project) you would have the best luck working on the bias* in VERY small sections, starting at one end and ending at the other or maybe working from the center out (perhaps over a period of days) gluing only a centimeter or so at a time, or whatever amount of material can be successfully manipulated before the next gluing tries to pull it out. Pen2paper had some really great advice!

 

Me, I'd ditch the bookcloth altogether for now and head down to my local fabric shop for a tight *knit*, something that will wear well and yet has the "give" to get into all the little corners. A knit will do that for you. Think of a T-shirt, and how it stretches and gives: that's a knit. All natural or synthetic, doesn't matter, but wash and dry it before you work with it. A straight weave like that of your bookcloth (or even a very light cotton) just doesn't have the stretch lengthwise to give you anything but grief.

 

***Working "on the bias" means that you lay the fabric diagonally to your project: it gives you the absolute most flex available in the fabric. Since your amazing design (I love it!!!) is all verticals and horizontals, laying the fabric at a 45 degree angle to it -- so that the grain is diagonal to your design lines -- will give you the best results possible. I'd still go for a knit, though, to be honest -- working on the bias may be successful, but bookcloth doesn't seem like a good forgiving sort of starter material like a knit would be.

 

Good luck!!!

Not really a scribe, more of a Pharisee...

 

"The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no Warrants shall issue, but upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized."

-- Fourth Amendment to the U.S. Constitution

Link to comment
Share on other sites

I don't know whether it would work, but have you tried a steamer? I suggest this because I think it could relax the fabric with heat and water without burning or ruining the nap. I haven't tried what you're doing so this is a thought, not a recommendation from experience.

 

This sounds like a great idea too, but test it first to be sure it doesn't warp your boards in the process: a good steam will relax more than the fabric. Maybe wetting it would be enough? Don't know, but I think you need to make a couple of small test boards to try your ideas before you attack the main projest...

 

Good luck!!!

Not really a scribe, more of a Pharisee...

 

"The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no Warrants shall issue, but upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized."

-- Fourth Amendment to the U.S. Constitution

Link to comment
Share on other sites

Bias! stretching on the bias...

yes, Daisy that's the single word I was searching for in my lengthy post! :D

 

what about raw silk? this has rather a loose nubby weave.. filmier than book fabric.. would look gorgeous on a journal..

ought to be available in TM's locale. (feel like I'm really intruding with overfiring brain cells here :doh: )

but, the frame that TM has cut reminds me of Tiffany .. thinking colorful silk

 

 

Link to comment
Share on other sites

what about raw silk? this has rather a loose nubby weave.. filmier than book fabric.. would look gorgeous on a journal..

 

Oooh, that *would* be pretty! Oh my goodness, you said that and I saw a pearl white or champagne colored dupioni silk journal in my head. It could never leave the house :) but my, wouldn't it be gorgeous!

 

On a technical note, he might have to (spray?)paint the boards first, though, to prevent see through...

Not really a scribe, more of a Pharisee...

 

"The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no Warrants shall issue, but upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized."

-- Fourth Amendment to the U.S. Constitution

Link to comment
Share on other sites

from #677 it appears there must be some flex/stretch to he book fabric?

how much "work" time do you have before the glue sets? can you give extra allowance (slack) at the edges? then work the stretch/slack INwards Towards the center, then adjusting back to the edge whatever slack remains? or is to Touch the fabric on to the board a One-shot commitment?

love the design.. the balance of the tight-multi-part upper area, more open area lower containing the initials is spot on! imho : )

 

Thanks ,

there is not much stretch actually.

I glue straight on without waiting, maybe I shld change the way I glue it on, ie , glue in small sections till the bookcloth hugs each corner and recess well before moving on ...

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

I don't know whether it would work, but have you tried a steamer? I suggest this because I think it could relax the fabric with heat and water without burning or ruining the nap. I haven't tried what you're doing so this is a thought, not a recommendation from experience.

 

Thanks , haven't tried this before .

I think its risky ...

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

Hey, TM Lee! :)

 

If you use bookcloth (IF bookcloth can actually be used successfully in this project) you would have the best luck working on the bias* in VERY small sections, starting at one end and ending at the other or maybe working from the center out (perhaps over a period of days) gluing only a centimeter or so at a time, or whatever amount of material can be successfully manipulated before the next gluing tries to pull it out. Pen2paper had some really great advice!

 

Me, I'd ditch the bookcloth altogether for now and head down to my local fabric shop for a tight *knit*, something that will wear well and yet has the "give" to get into all the little corners. A knit will do that for you. Think of a T-shirt, and how it stretches and gives: that's a knit. All natural or synthetic, doesn't matter, but wash and dry it before you work with it. A straight weave like that of your bookcloth (or even a very light cotton) just doesn't have the stretch lengthwise to give you anything but grief.

 

***Working "on the bias" means that you lay the fabric diagonally to your project: it gives you the absolute most flex available in the fabric. Since your amazing design (I love it!!!) is all verticals and horizontals, laying the fabric at a 45 degree angle to it -- so that the grain is diagonal to your design lines -- will give you the best results possible. I'd still go for a knit, though, to be honest -- working on the bias may be successful, but bookcloth doesn't seem like a good forgiving sort of starter material like a knit would be.

 

Good luck!!!

 

Thanks, yes I agree with you - something with stretch will definitely help.

I think wetting the bookcloth will give it that little stretch that is much needed .....

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

what about raw silk? this has rather a loose nubby weave.. filmier than book fabric.. would look gorgeous on a journal..

 

Oooh, that *would* be pretty! Oh my goodness, you said that and I saw a pearl white or champagne colored dupioni silk journal in my head. It could never leave the house :) but my, wouldn't it be gorgeous!

 

On a technical note, he might have to (spray?)paint the boards first, though, to prevent see through...

 

Yes I have silk ..., will try it out soon .... biggrin.gif

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

Tried a few dry-runs ...

 

This one is GEMATEX bookcloth - a high quality thicker bookcloth.

The thickness of the bookcloth makes it hard for it to hug the recesses well...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4516.jpg

 

 

This is a brand-less local bookcloth.

Its thinner and you can immediately see that it hugs the recesses better.

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4515.jpg

 

 

Wetting the bookcloth must be done carefully.

The water here spilled onto the right surface and caused the bookcloth to shrink from its paper backing.

What I learnt here is that the backing needs to be dampened but its bookcloth surface must not touch water...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4517.jpg

 

This is SAIFU bookcloth in Salmon Pink ...

A very nice hue ...

This bookcloth is purportedly high quality.

I also notice that it is thinner than the 2 above.

The paper backing here is thinner.

The results are good.

I wet the backing carefully with a small brush taking care to keep the bookcloth surface dry.

While damp , I then glued it onto the pattern.

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4518.jpg http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4519.jpg

The results are promising.

My guess is to improve on technique.

 

 

This is silk

A deep mauve hue.

The other silk is green underneath.

Unfortunately I don't have a champagne hue....

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4523.jpg

 

It is thin and there's a lot of stretch .

It hugs the recesses perfectly.

But I don't like its looks.

Somehow it doesn't look good on a journal...

Maybe its just me.

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4522.jpg

 

 

I am attracted to the SAIFU Salmon Pink sample above.

It looks good.

A nice feminine shade of colour too.

The hue is not too dark such that you cannot perceive the emboss.

Lighter colours work better bcos you can see the shadows and relief.

The beige bookcloth sample above is also good in hugging the recesses but its hue is a little too unexciting.

 

At this moment , I am thinking most likely I may execute with the SAIFU Salmon Pink bookcloth.

And while I do that , I need to employ a different technique as suggested above - maybe glue progressively , in little sections .

Edited by TMLee

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

the salmon is just wonderful..

it's so generous of you to engage us (entertain our thoughts), in your creative process..

the green silk is quite beautiful.. green and purples together - so rich and earthy.

us?:doh: > me.. Daisy does know of what she speaks... my art/crafts studies are from years and years ago.

in any event, Thank you! this is so enjoyable.

Link to comment
Share on other sites

Wow! That was a lot faster than I expected. Great practice boards!!! I liked the beige bookcloth the best in the pictures, I thought it rendered the embossing the best, though the salmon is quite nice as well. I agree that the silk doesn't work well for the embossing/debossing -- I didn't think this possible! But the natural light-play in the silk detracts from the more subtle light-play in the embossing, not a good effect. I'd still take a silk on a flat cover any day, though. :)

 

Your efforts are continuously inspiring! Using your ideas I actually made a little hardcover for a little No. 5 Rhodia pad that I have that I wanted to stay closed in my purse. It turned out well -- mat board, paper cover, tucked a little elastic band onto it and everything -- but I must say it was harder to do than it first appeared! (If I ever get my camera out again I'll take pictures, but it probably won't be soon, sorry.) I now carry it in my purse and it's a perfect fit. So I owe you thanks for inspiring me to do that. :)

 

Keep up the good work!!!

Not really a scribe, more of a Pharisee...

 

"The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no Warrants shall issue, but upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized."

-- Fourth Amendment to the U.S. Constitution

Link to comment
Share on other sites

the salmon is just wonderful..

it's so generous of you to engage us (entertain our thoughts), in your creative process..

the green silk is quite beautiful.. green and purples together - so rich and earthy.

us?:doh: > me.. Daisy does know of what she speaks... my art/crafts studies are from years and years ago.

in any event, Thank you! this is so enjoyable.

 

Thanks !

 

cloud9.gif

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

Wow! That was a lot faster than I expected. Great practice boards!!! I liked the beige bookcloth the best in the pictures, I thought it rendered the embossing the best, though the salmon is quite nice as well. I agree that the silk doesn't work well for the embossing/debossing -- I didn't think this possible! But the natural light-play in the silk detracts from the more subtle light-play in the embossing, not a good effect. I'd still take a silk on a flat cover any day, though. :)

 

Your efforts are continuously inspiring! Using your ideas I actually made a little hardcover for a little No. 5 Rhodia pad that I have that I wanted to stay closed in my purse. It turned out well -- mat board, paper cover, tucked a little elastic band onto it and everything -- but I must say it was harder to do than it first appeared! (If I ever get my camera out again I'll take pictures, but it probably won't be soon, sorry.) I now carry it in my purse and it's a perfect fit. So I owe you thanks for inspiring me to do that. :)

 

Keep up the good work!!!

 

Thats great to hear you have made your own pocket book clap1.gif

As you continue to make more, you will finally settle on something that suits your needs to a T.

Enjoy ! biggrin.gif

Edited by TMLee

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

I started on the "LK" emboss with the SAIFU Salmon Pink bookcloth ....

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4509.jpg

 

I figured I needed to start from the centre so as to allow more stretch in many directions ...

I picked the two tiniest squares to start the gluing ...

Before gluing onto the window fret cutout pattern, the back of the bookcloth was wet to soften it and help it cling to the corners and ridges which it will soon be made to adhere to...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4524.jpg

 

Decided to clamp it tight to press it ...

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4526.jpg

 

After about half and hour

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118D%20GEMATEX%20Ochre%20LK%20Emboss/DSCF4525.jpg

 

Its too tedious...

I should finish by next Christmas.

 

There must be a better way .... doh.gif

 

 

Will mull over it and think up alternatives ...

 

I think the cutouts are too thick for the bookcloth to wraparound tightly ... gaah.gif

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

The cutouts are too thick.....So I decided to use a thinner card ...Remembering I had this printout many months ago, I decided to retrieve it since I have begun doing some embossing ....A printed image of "autobots" on a magazine cover..http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4527.jpgCut it out ...http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4528.jpgPlacement onto a rear coverboardhttp://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4529.jpgGluing it back into exact position ...http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4530.jpgReady to receive the bookcloth coverhttp://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4532.jpgThe cutouts were glued thinly.Only the cutout was glued, the rest of the coverboard was left unglued for now.The idea is to permit as much stretch as may be neededThe back of the bookcloth was also made wet and pliable with a brush.Glued on and went over the edges with a bonefolderI should have used something to protect the bookcloth surface ... now its a little marred..http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4534.jpg Decided to press hard to make the bookcloth reach the creviceshttp://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4535.jpgAfter about half and hour http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4539.jpghttp://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4538.jpgIt works better with thinner cards .... headsmack.gifmagazine covers that are not too thick but still stiff ...

 

http://i169.photobucket.com/albums/u236/TMLee/2010%20JOURNALS/GEMATEX%20SERIES/Journal%20118%20GEMATEX%20-%20Ochre/Journal%20118E%20GEMATEX%20Ochre%20autobots%20Emboss/DSCF4555.jpg

Edited by TMLee

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

Lee -

 

This is a "high-tech" idea, but air pressure may be a good way to force the bookcloth into the details of the de-boss or emboss detail.

 

A pliable air bladder - like that for a seat cushion - tightly enclosed in a "box", pumped up with a bicycle tire pump, may be enough to force the bookcloth into the details of the emboss and deboss features.

 

- just an idea...

 

> And I agree with an earlier Poster: It's great of you to allow us to follow your experimentation and creative process as you invent and test new ideas and creative endeavors - !

 

[ BTW: Did you abandon the "LK" / Salmon Bookloth / Windowpane covers? ]

Link to comment
Share on other sites

[ BTW: Did you abandon the "LK" / Salmon Bookloth / Windowpane covers? ]

 

Hi David,

Good to hear from you ... biggrin.gif

 

Yes , I will probably abandon this pair of journals with initials

and

replace them ...

I'll most likely improve the design , now that I will be using thinner filler cards ...

They are easier to cut and most importantly the heavier Gematex bookcloth don't have too deep a thickness to adhere onto.

The two will have a window fret theme in order to be matching ... tongue.gif

The creative juices are now flowing ... cool.gif

 

I think I may just have a found the solution in this last endeavor.

Again , this opens up a lot of possibilities.

Just imagine !!!!!!

 

I am thinking of doing a cutout of the FPN logo but I think its too diffciult to execute.

Cutting the letters and tight rounded curves is too difficult.... blush.gif

But its a nice logo to create a bas relief ....

KIV this idea for the moment, till the solution presents itself ....

 

BTW, your suggestion is pretty hi-tech to me. I don't think I have eqpt anywhere near like that ...

Still, thanks a bundle ... biggrin.gif

 

 

 

... 671 crafted ... one at a time ... ☺️

instagram

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...