Jump to content

Fp Noob Help: My Pen Doesn't Seem Fond Of Writing. . . .


Zettachrome

Recommended Posts

Hello, fellow Fountain Pen geeks! I've always wanted a good fountain pen, but have only hitherto owned disposable ones, until yesterday, when I purchased what I beleive to be a Parker Sonnet. It took a bit to get the ink flowing after I stuck an ink cartridge in there, but it's kind of . . . halting. Sometimes it writes, and sometimes it doesn't.

 

Did I do something wrong, or is this normal for fountain pens, you know, to take a bit to start writing without interruption?

 

I store it upright, I put the cartridge in correctly, and write as I should with it, it just stops from time to time and I have to wait a bit or shake some ink out through the tip again to get it working.

 

Thanks in advance!

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • Mike 59

    1

  • kidde

    1

  • Notgatherox

    1

  • Zettachrome

    1

Top Posters In This Topic

I would say it's probably a case of residue manufacturing lubricant left in the feed/nib that causes this issue.

 

Try flushing the pen with some soap and water. Or mix up a batch of ammonia to water pen flush in a 1:10 ratio.

 

Clean the pen throughly with water after doing the above step, and you should get a pen that writes consistently.

 

 

 

 

~Epic

http://farm2.static.flickr.com/1348/557449480_2f02cc3cbb_m.jpg http://null.aleturo.com/Dumatborlon/Badges/5EH4/letter.png
 
A sincere man am I
From the land where palm trees grow,
And I want before I die
My soul's verses to bestow.
 
All those moments will be lost in time.
Like tears in rain.
Time to die.

 

Link to comment
Share on other sites

If your pen is brand new, never been filled with ink, then it would really benefit from a 'flush' through, as mentioned above (#2).

It's thought that new pens are likely to have at least a small amount of 'release agent' still on the surface of the plastic components.

With the ink channels being only around 0.001" or so wide, it doesn't take very much to cause ink flow issues.

It's normally a good idea to give the finger grip/feeder/nib part of the pen, a soak in a solution of cool water with a drop or two of dish washing up liquid mixed in.

First remove the ink cartridge. An old jam jar or beaker would be useful too.

If you can scoop the water up into the top opening where the cartridge would fit, let it run through (10 seconds) and repeat a dozen times, then dry the nib on a paper towel.

Refit the cartridge and test again. the ink may be slightly watery for a few words but will improve with writng.

Hopefully the Sonnet was supplied with a Parker Quink cartridge, with blue or black ink.

Parker pens will accept only Parker Quink cartridges or converters, other types will not fit.

Hope that makes sense.

Edited by Mike 59
Link to comment
Share on other sites

Your post leads me to think your pen had prior use. Flushing is still a good place to start, either new or used. If my assumption is correct about being previously owned I'd also soak it to loosen up any old ink dried in the feed. Your issue seems to be a flow problem, so flushing is a good starting point. Let us know how it goes.

 

Paul

"Nothing is impossible, even the word says 'I'm Possible!'" Audrey Hepburn

Link to comment
Share on other sites

You can try to stress on the Nib more a bit than the normal pressure of writing for one time, let the Nib take its first breathing then your pen should write well.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...