Jump to content

Fosfor Islander First Impression And Short Review


mhguda

Recommended Posts

I first saw a pen like this on this forum, when manojd showcased a wooden pen he'd made. I wanted a wooden pen for a long time, so when he offered to make me one, I was hooked. Especially when he also explained he made pens from rolling pins!

This is the first commissioned pen in my collection. I'm not sure if I can really call it commissioned, since the artist himself designed the pen - I was offered some options, but it really is manojd's creation. The most influential decision I could make was clipless yes or no. I chose clipless. Here is a picture, from his website:

fpn_1387340767__manojspen.jpg

This is a beautiful pen: ebonite section polished to a serious sheen, connected to the wooden barrel with a metal insert containing screw threads for the wooden cap; a relatively small but very capacious ebonite (I think!) feed under a Schmidt F nib, ,size 5 I would guess. A comfortable nib with very nice flow: not too wet, never dry, the nib fairly stiff but there is a hint of line thickness variation that I slightly increased by writing a few lines on 600 grit sandpaper.

The wood is a beautiful deep dark brown Indian rosewood, well protected against water-based moisture or oils from my hands; it feels very comfortable in my hand.

This pen cannot have the cap posted because the metal threads in the cap pose a risk of scratching the wooden barrel; but this is fine, it is long enough and in this way does not become top-heavy. The cap, with its metal insert, inner cap, and silver cap ring near the top, is itself quite heavy.

The one half-issue I have with the pen is the metal threads just above the barrel; they are a little sharp and sometimes seem to dig into my fingers as I write, even though I have a fairly relaxed grip (having used fountain pens almost exclusively for decades now). I tend to hold the pen at about that position, or at the section itself, but the section is slender and I like a slightly wider grip, especially when doing more than half a page or so. I would have preferred ebonite threads that are easier on the hand, but visually, the slender section is very nice and I would not want the looks of the pen to change...

 

All in all, I am very pleased with my choice to buy this pen. It is a beautifully made pen that writes just the way I like it.

Here is a small writing sample:

fpn_1387340521__writing_sample.jpg

I am also happy that manojd considered my input when naming the pen...

a fountain pen is physics in action... Proud member of the SuperPinks

fpn_1425200643__fpn_1425160066__super_pi

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • mhguda

    3

  • manojd

    1

  • Moshe ben David

    1

  • mohan

    1

Top Posters In This Topic

How do you fill it? Cartridge/converter?

 

sharp looking pen!

Moshe ben David

 

"Behold, He who watches over Israel neither slumbers nor sleeps!"

Link to comment
Share on other sites

Exactly. It has a big Schmidt converter. Takes up plenty of ink.

a fountain pen is physics in action... Proud member of the SuperPinks

fpn_1425200643__fpn_1425160066__super_pi

Link to comment
Share on other sites

mhguda,

 

Thanks for this quick review and I am glad to know that you are enjoying the pen. I am already considering changing the thread pitch to 12mm x .75. This should be easy on the fingers. The section width is limited by the brass tube insert. I could go for a thinner tube, but that may make the cap vulnerable.

 

Nice handwriting :)

Link to comment
Share on other sites

manojd,

 

Thanks for being so responsive. As I said, I really enjoy the pen, and I feel the change you are going to make will make it even better. It will mean my pen will be even more distinctive...

If making the section width greater would put the pen at risk, of course you should not do it - it's such a minor quibble, probably more of an idiosyncrasy. If the threads can be gripped easily it is not a problem at all...

a fountain pen is physics in action... Proud member of the SuperPinks

fpn_1425200643__fpn_1425160066__super_pi

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33501
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26627
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...