Jump to content
Classifieds is broken, please do not submit any new ads ×

Review: Innovative Pen From India, The Guider "twins"



Recommended Posts

I have just had an opportunity to ink up a fountain pen produced in India that only days ago came out of the prototype stage and is now available to the public in limited numbers. It is a stunning innovation in Indian pen design and manufacturing, and very well executed. Best of all, its price is affordable for the overwhelming majority of fountain pen enthusiasts.

 

The pen is a Guider "Twins." Designed independently and placed into production by Mr. Lakshmana Rao, the respected head of India's Guider Pen Works, it features two nibs, each with its own ink reservoir, at opposite ends of a black ebonite body. For all its 6.25" (15.8cm) length, the Guider "Twins" is lightweight, a special quality of ebonite, which is the characteristic material of quality Indian pens, and widely used by American fountain pen manufacturers until they switched to plastic in the 1940s.

 

post-87598-0-40204300-1386013129_thumb.jpg

post-87598-0-27217300-1386013202.jpg

 

Each reservoir holds approximately 1.35ml of ink. That amount -- 30% larger than what many cartridge converters hold -- is more than adequate for average writing purposes, while serving to mitigate against ink "burping," a well-known feature [not a bug; hat-tip to Microsoft] of eyedropper pens. ("Burping is generally explained as the result of heat from your hand being transferred to the ink reservoir, which expands the volume of the air pocket in the reservoir as the amount of ink draws down and the amount of air exchanged into the reservoir grows in size by replacing the ink.) The smaller volume of ink which each reservoir of the Guider "Twins," and thus the ultimate size of the air pocket, bodes well for overcoming the "burp" phenomenon.

 

The body, caps and sections of the pen are all ebonite. The caps are flat. One cap, however, is topped by a round, flush disk composed of acrylic. (The disk on the one I acquired, shown above, is white; another version of the same pen sports a red acrylic disk.)

 

Against a ground of highly polished, lustrous ebonite, this end piece lends a sleek, dramatic flair to the pen's design. It also serves a welcome functional purpose: to remind you, if you use many inks, that one end of the pen holds a different color or brand of ink. (Of course, it's up to the user to remember which end holds which color/brand of ink.)

 

Filling each reservoir with a different color of ink is extremely useful not only to ink enthusiasts, but also to writers (like myself) who are now able to devote one end of the pen to writing first drafts, and the other end to mark up revisions -- without having to rummage through their fountain pen collections, trying to remember which pen is inked up with what color. With this pen, both colors are right at your fingertips.

 

Of course, if you fill both reservoirs with the same color, you'll be carrying close to 3ml of ink -- nearly three times as much as a cartridge converter, with the added advantages that you'll be twice as likely not to burp as you write that long journal entry, love letter or next chapter of your novel.

 

The Guider "Twins" nibs are iridium-point Guider nibs. Both nibs are fine, in both senses of the word: line width, and smoothness. Each provides a touch of feedback on Clairefontaine paper, but so little that it's not distracting. Fountain pen users familiar with micromesh and lapping film will be able to fine-tune their nibs with a few brief twirls of the tines. For the rest of us, these Guider nibs will be perfectly respectable "right out of the box."

 

Here is a writing sample, made with two different inks:

 

post-87598-0-29079500-1386014136_thumb.jpg

 

Two features of the "Twins" are of note:

 

First, there is no clip. Something had to give in designing a pen with two nibs, and apparently it was the clip. That said, it is probably wise not to attempt to carry this peen loose in your shirt or blouse pocket. At 6.25", it is likely to fall out in a moment of rash movement (think: bending over to retrieve a paper clip), and it would be a shame to mar the highly polished finish of this pen. Rather, it would be best to carry it in a pouch (I am making one of leather at the moment), and even better, a pouch with a built-in clip that can be slipped over the fabric of a shirt or blouse pocket (a task beyond my current leatherworking skills).

 

Another reason to acquire and use a pouch is that the designer and manufacturer have fashioned it from an ebonite rod that has been machined to be as perfectly round as possible. Set it down on its side, give it a gentle nudge and, absent a cap clip, it will roll -- and once it runs out of writing surface and gravity takes over, the next stop is usually the floor, and all too many of us are familiar with the consequences.

 

A second thing to note is that the cap threads at each end are closely machined and not interchangeable, as a way to make sure you don't mix up which ink is where. Each cap is designed to thread easily and securely on its designated end of the pen. My suggestion is that if you inadvertently mix up the caps, be attuned to any possible resistance you may encounter as you replace the cap. If you sense resistance, try putting the other cap on that end, and chances are you will not meet resistance. Moreover, note that the caps unscrew when turned counterclockwise. When recapping, it is always good practice to first turn the cap in a clockwise direction until you hear a gentle "click." That means that when you then turn the cap counterclockwise, the threads will be properly engaged, and you'll be less likely to strip the threads.

 

The Guider "Twins" just recently went into production and is available in limited numbers from FPN member Mesu. Her ad in FPN Classifieds displays the pen in higher-quality photos than I've been able to take.

 

If I sound enthusiastic about this pen, I am. (Full disclosure: I have no affiliation with either Guider or Mesu, other than having previously purchased a Guider Marala through Fountain Pen Revolution, and this pen through Mesu.) I own a good number of Indian ebonite eyedroppers, including the ones just mentioned, and a Guider super-mini, a Ranga Duofold Model 3, a Ratnamson No. 15, and a Gama Supreme. The design of this Guider "Twins" pen promises to give Indian pen design and manufacturing a shot in the arm, and to boost Indian ebonite eyedroppers from a niche market to a real contender in the global pen market. Innovative design and attentive, handcrafted production make this a desirable pen in any collection.

Edited by Woodnut
Link to post
Share on other sites
  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

  • Woodnut

    3

  • chandelle

    2

  • Mesu

    1

  • shrujaya

    1

Top Posters In This Topic

Posted Images

Thank you, Somnath 1077! It's my first review, and it's encouraging to receive your nice response. It was an easy review to do (although it took a while to write it, take the photos and then post the review) because it's a wonderful looking pen and a wonderfully useful pen, and it's delightful when something comes along that satisfies both criteria. Again, my thanks and appreciation.

Link to post
Share on other sites

kinda like gluing 2 pens back to back.

2 Short pens.

 

It is more like turning 2 pens from a single rod of ebonite.

 

No gluing anywhere except for the red/white acrylic tip on one cap to differentiate one side from another.

Link to post
Share on other sites

Hi...here are links to two of my earlier posts (five years earlier...in 2008!!) similar kind of "innovative pens"... kind of role reversal though, instead of the common trunk, these pens have common caps...the first one is by Deccan and the second one is by Guider...

 

https://www.fountainpennetwork.com/forum/index.php/topic/71991-the-longest-pen/

 

https://www.fountainpennetwork.com/forum/index.php/topic/78177-slightly-longer-than-the-longest/

 

Enjoy and do let your comments flow...

 

Shrujaya

Edited by shrujaya

Writing and posting about fountain pens exclusively on www.jaisiri.blogspot.in ... recent posts on Hema Pens (Hyderabad), Haul at Majestic (Bangalore), and Asoka Pens (Tenali)...

Link to post
Share on other sites

I apologize for the question, but how do you fill the pen?

Is it fair for an intelligent and family oriented mammal to be separated from his/her family and spend his/her life starved in a concrete jail?

Link to post
Share on other sites

I apologize for the question, but how do you fill the pen?

 

Anne-Sophie, that's a good and fair question.

 

The pen is an eyedropper:

 

remove a cap from either end of the pen;

 

unscrew from the barrel the section holding the nib and feed;

 

make sure the threads on the section have a thin coating of silicone grease (to prevent ink from leaking through the section threads when you point the nib down to write with it -- the grease need not be replaced each time you fill the pen);

 

fill a plastic pipette, eyedropper (such as a medical eyedropper) or syringe with ink; slowly squirt the ink into the barrel;

 

screw the section back into the barrel; replace the cap;

 

place the pen, nib downward in a glass or cup for a minute or less to prime the feed, and rinse the pipette, eyedropper or syringe --

 

and you're off to the races.

 

It takes a tad longer to fill a pen with an eyedropper than with a cartridge or converter. Fill both sections of this pen with the same color of ink and you have about 30% more ink available than with a converter in an average fountain pen. And since an eyedropper is a simple mechanism -- actually no mechanism at all -- there are no worries about a converter or ink sac jamming or deteriorating.

 

Hope this helps.

Link to post
Share on other sites
  • 11 months later...

Woodnut, a nice review! :thumbup:

 

Dumb question - when filled with different colored inks, is there a way of knowing - other than actually testing it out, of course - which color is at what end? :)

 

 

------------------------------------------------------

'Nothing' isn't impossible. I've done it all my life

http://fountainpenreviews.wordpress.com/

Link to post
Share on other sites

Woodnut, a nice review! :thumbup:

 

Dumb question - when filled with different colored inks, is there a way of knowing - other than actually testing it out, of course - which color is at what end? :)

 

 

 

Sorry, ignore my question. I see a small white strip at the end of one of the caps. That should be enough of a marker.

 

Senior moment! :(

------------------------------------------------------

'Nothing' isn't impossible. I've done it all my life

http://fountainpenreviews.wordpress.com/

Link to post
Share on other sites

Woodnut, I never saw this review when it first went up! Very nice write-up of two nice pens in a single body.

I like your name - will try to make the change in my mind. My name for it was double-ended Guider, but yours is more poetic...

Mine has the red identifying cap, which is fitting, since I put a red(dish) ink in there. I'm still on its first fill, although I've had the pen for over a year. Talk about having enough ink! And it starts every time I put the nib to paper. It's one of the successful Guiders: no nib issues, and a beautiful, sleek body. No leaking, no blurping. I do not mind holding the cap in my other hand as I write, or otherwise find a safe place to leave it where it won't roll off.

Thanks for posting...

a fountain pen is physics in action... Proud member of the SuperPinks

fpn_1425200643__fpn_1425160066__super_pi

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      37736
    2. PAKMAN
      PAKMAN
      30639
    3. Ghost Plane
      Ghost Plane
      28220
    4. jar
      jar
      26101
    5. wimg
      wimg
      25570
  • Upcoming Events

  • Blog Comments

    • Ferocity
      I hope you enjoy it ❤️ You are so very lucky ❤️
    • halffriedchicken
      Not sure if this has been suggested already but would a setting for localized regions or chapters in FPN be helpful? I don't know if there is a way to find local FPN members who would be nearby. I don't know if we want to be discoverable but a setting to know how many members are in 25, 50, or a 100 miles of each other might be helpful. We can create a regions specific network like Craigslist where people could use that to connect with nearby members, conduct in person sales, arrange FPN meetups
    • Daneaxe
      Hi again all, I forgot to tell y'all that I made the post about Sweden ink PIF. Most have probably found it long ago, but here's a link, anyway:      
    • Ayami_109
      I read your blog post and all the replies with much interest. I'm a FP user in Australia. Been part of this forum for years but rarely post. I did come across your ink sharing thread and considered participation. For me it's not lack of interest but lack of time to play around with FP and inks. I'd feel bad to put my hand up for the box and just have it sit until gosh knows when...   I also think that the FP community in Australia is smaller, and I wonder how many in the community are
    • A Smug Dill
      Even so, you'd end up with a fragmented list, and it becomes an O(N²) process for each prospective requestor to check what is available: effectively recreate the list of currently active servers (without any reliable up-to-date info upfront about the inks and number of samples on offer in the thread) from the sequential list of posts, which may be spread over two or even more pages, and then query each server independently to check what is currently on offer.   It comes down to not hav
  • Chatbox

    You don't have permission to chat.
    Load More
  • Expiring Soon

    • By benbot517
      51 years and 8 months
    • By benbot517
      51 years and 8 months
    • By benbot517
      51 years and 8 months
    • By Okami
      51 years and 8 months
    • By Okami
      51 years and 8 months
  • Random Adverts

  • Files

  • Today's Birthdays

    1. 2ndJOB
      2ndJOB
      (52 years old)
    2. alleysally
      alleysally
    3. arkan15
      arkan15
      (34 years old)
    4. bakerag
      bakerag
      (46 years old)
    5. Basilios
      Basilios
      (37 years old)





×
×
  • Create New...