Jump to content

Vacumatic Jewel Replacement


Scrawler

Recommended Posts

I am not sure if this should be here or in the Repair Q&A forum.

 

I have a fairly tatty (gouged and worn) 1935 lock down filler vacumatic. It is basically black with strong ambering and some transparency. It is missing the jewel on its blind cap. I have a cap jewel from a 1946 vac that was destroyed by glue and a hacksaw. That cap jewel is just about the right size and screws into the blind cap. It is however a little over 1MM too long.

 

Before I make a mistake I will regret, I was wondering if anyone had advice on shrinking a black plastic jewel.

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • Ron Z

    2

  • Scrawler

    2

  • OcalaFlGuy

    1

  • sherbie

    1

Top Posters In This Topic

I,m sure Ron or one of the many repair experts will chime in soon enough, but why not just file away the 1 mm excess - i presume from the bottom of the screw threads?

Edited by sherbie
Link to comment
Share on other sites

Sherbie is right. If you can screw the jewel into the blind cap and it fits the tassie as it should but the stem is too long, you should file it shorter. Anything attempt to "shrink" the material will damage the rest of the jewel. A bit tricky to do because it's tough to hold these little things and cut or file them without damaging the threads.

 

Blind cap jewel stems usually are short, but even so you may not need to shorten it. Try screwing it in first and see if it hits or pushes the plunger down before shortening it. If it doesn't interfere with the plunger, leave it as it is.

spacer.png
Visit Main Street Pens
A full service pen shop providing professional, thoughtful vintage pen repair...

Please use email, not a PM for repair and pen purchase inquiries.

Link to comment
Share on other sites

Yes the only thing wrong is that the threaded part is too long. I figured I could file it or grind it off with a dremel. But as I do not know what they are made of, I was wondering if it could be cut through with a hot wire or something. I was trying to avoid plastic dust. It looks like I will just have to set the whole thing in wax ( to hold it, because it is small) and just file it off.

Link to comment
Share on other sites

As thin as those threads have to be, and as thin as the stem is, I'd be inclined to try and put a stout single edge razor blade at the desired thread and use the blade to roll the stem around cutting it,

 

Seems about as exact as I can come up with.

 

Bruce in Ocala, Fl

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...