Jump to content

Making Fp Ink From Cold-Water Soluble Dye


bobzoryuncle

Recommended Posts

I ran across a cold-water cellulose reactive dye for cotton clothing the other day. A lot of tie dyeing people use this stuff, and I think one guy used it to color heavy card stock. Why not mix up a strong solution of this stuff (example: Procion MX http://www.jacquardproducts.com/products/dyes/procionmx/) and use it as FP ink? Is anyone willing to volunteer a few minutes, an inexpensive Jinhao pen, and a bottle of that dye to mix up a few samples and test my theory out.

 

I believe this stuff might work as an FP ink because it is water soluble at colder/room temps, and is cellulose-reactive like the famous Noodler's inks. It seems to be bloomin' cheap too...

Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

  • thorn

    15

  • bobzoryuncle

    8

  • SamCapote

    5

  • notgiven

    5

I ran across a cold-water cellulose reactive dye for cotton clothing the other day. A lot of tie dyeing people use this stuff, and I think one guy used it to color heavy card stock. Why not mix up a strong solution of this stuff (example: Procion MX http://www.jacquardproducts.com/products/dyes/procionmx/) and use it as FP ink? Is anyone willing to volunteer a few minutes, an inexpensive Jinhao pen, and a bottle of that dye to mix up a few samples and test my theory out.

 

I believe this stuff might work as an FP ink because it is water soluble at colder/room temps, and is cellulose-reactive like the famous Noodler's inks. It seems to be bloomin' cheap too...

It's an interesting idea, but I'm curious: Why aren't you volunteering the Jinhao and a bottle of that ink to test your own theory out? Have you tried it already, and are just looking for corroboration? Or is there some reason you don't want to try it yourself?
Link to comment
Share on other sites

You thought up a great idea, why don't you try it for yourself. Remember, the next to lighten all men may be you. I think we would be only too happy for you if you glow with success.

 

Unless of course you would be willing to send the pen and dye to one of us willing to carry this experiment out, also insurance coverage in case it explodes and we become permantly dyed ourselves!!

 

Best wishes,

 

Pickwick.

 

 

They came as a boon, and a blessing to men,
The Pickwick, the Owl and the Waverley pen

Sincerely yours,

Pickwick

Link to comment
Share on other sites

Oh, I thought someone might already have tried it or was more knowledgeable than me with regard to ink mixing. I'll be throwing my Parker Jotter into the fray (I despise that writing instrument of torture and hope it "suffers" during my Franken-ink experiment) as I test this out.

Link to comment
Share on other sites

You thought up a great idea, why don't you try it for yourself. Remember, the next to lighten all men may be you. I think we would be only too happy for you if you glow with success.

 

Unless of course you would be willing to send the pen and dye to one of us willing to carry this experiment out, also insurance coverage in case it explodes and we become permantly dyed ourselves!!

 

Best wishes,

 

Pickwick.

 

That's very funny. I like your wit.

Link to comment
Share on other sites

Many textile dyes have salts in them, which makes them unsuitable for pen inks. You would want to confirm what else is in the dye powder other than the dye before turning some in to ink.

Link to comment
Share on other sites

I would try it if I have access to this dye. Noodler's bulletproof ink use cellulose reactive dye. I don't know which one, but experimenting is good. It would be great if there is a ingredient list for this dye. I wouldn't want any iron oxide or lake dye in my pen.

Fountain Pen Travel/display Case out of stock now. Found new materials. People in the wait list will be contacted, slowly. Thank you!

Link to comment
Share on other sites

I just e-mailed the manufacturer of that dye to see if they can tell me anything. I'll keep you posted. BTW I love this forum.

Link to comment
Share on other sites

Many textile dyes have salts in them, which makes them unsuitable for pen inks. You would want to confirm what else is in the dye powder other than the dye before turning some in to ink.

 

Greetings Bobzoryuncle, et al,

 

TMA brings up a valid point. Here are a couple of more- you will need to add a surfactant because fountain inks are around 94% water and water has a very high surface tension, (which seriously inhibits flow) AND you will have to add a fungicide, (biocide is the new term), because if you don't, you'll either have mold or SITB... or both in 3-4 days. If Tryphon Enterprises is still around, they used to sell a surfactant and fungicide separately in little vials. Good luck with your experiments... and be gentle with that Parker pen- it can't help it if it was born defective. :rolleyes:

 

All the best,

 

Sean :)

Edited by S. P. Colfer

https://www.catholicscomehome.org/

 

"Every one therefore that shall confess Me before men, I will also confess him before My Father Who is in Heaven." - MT. 10:32

"Any society that will give up liberty to gain security deserves neither and will lose both." - Ben Franklin

Thank you Our Lady of Prompt Succor & St. Jude.

 

 

Link to comment
Share on other sites

I have been looking into this myself. I have not done any tests, but from reading the biggest problems seem to be that most reactive dyes have a very short shelf life once mixed with water and the alkaline substance (such as lye) they require to activate them.

 

The surfactant and biocide are comparatively trivial and well documented problems.

 

The was a project at one time to create an open source ink, but shut down several years ago, it would be interesting to restart such a project.

Edited by UltraMagnus

politician and idiot are synonymous terms - Mark Twain

Link to comment
Share on other sites

The surfactant and biocide are comparatively trivial .............and well documented problems.

 

Greeings UM,

 

Huh? :huh: I beg to differ on the first part and I don't where you're going with the second part.

 

- Sean :huh:

Edited by S. P. Colfer

https://www.catholicscomehome.org/

 

"Every one therefore that shall confess Me before men, I will also confess him before My Father Who is in Heaven." - MT. 10:32

"Any society that will give up liberty to gain security deserves neither and will lose both." - Ben Franklin

Thank you Our Lady of Prompt Succor & St. Jude.

 

 

Link to comment
Share on other sites

The surfactant and biocide are comparatively trivial .............and well documented problems.

 

Greeings UM,

 

Huh? :huh: I beg to differ on the first part and I don't where you're going with the second part.

 

- Sean :huh:

 

My point is suitable chemicals are well known, phenol or Salicylic acid for a biocide, and photography surfactant can be used. From what I have read the proportions are not all that important either. As I said, it is comparatively, trivial to finding a suitable cellulose reactive dye and determining the correct concentration; I did not mean to imply it is an entirely trivial issue.

politician and idiot are synonymous terms - Mark Twain

Link to comment
Share on other sites

Many textile dyes have salts in them, which makes them unsuitable for pen inks. You would want to confirm what else is in the dye powder other than the dye before turning some in to ink.

 

 

Wouldn't the salts remain in solution, even in the pen?

Link to comment
Share on other sites

 

AND you will have to add a fungicide, (biocide is the new term), because if you don't, you'll either have mold or SITB... or both in 3-4 days.

 

 

What biocide/funigicide are used in ink now-a-days? Also, won't certain types of bacteria grow in ink?

Link to comment
Share on other sites

I ran across a cold-water cellulose reactive dye for cotton clothing the other day. A lot of tie dyeing people use this stuff, and I think one guy used it to color heavy card stock. Why not mix up a strong solution of this stuff (example: Procion MX http://www.jacquardp...dyes/procionmx/) and use it as FP ink? Is anyone willing to volunteer a few minutes, an inexpensive Jinhao pen, and a bottle of that dye to mix up a few samples and test my theory out.

 

I believe this stuff might work as an FP ink because it is water soluble at colder/room temps, and is cellulose-reactive like the famous Noodler's inks. It seems to be bloomin' cheap too...

 

My joking around apart, you did get my curiousity going on this subject, so iIdid some research. There was a Forum in FPN on making ink in May 2009 which I looked up. Like your idea it aroused quite a bit of interest, but petered out because of seeming difficulties in obtaining chemicals.

 

I did come across Aniline dyes for the leathercraft industry, and these can be obtained easily. there used with alcohol as a base. Also ehow gives an account about ink making.

 

I'll keep snooping around and see what's available.

 

Kind regards,

 

Pickwick

Edited by Pickwick

They came as a boon, and a blessing to men,
The Pickwick, the Owl and the Waverley pen

Sincerely yours,

Pickwick

Link to comment
Share on other sites

Many textile dyes have salts in them, which makes them unsuitable for pen inks. You would want to confirm what else is in the dye powder other than the dye before turning some in to ink.

 

 

Wouldn't the salts remain in solution, even in the pen?

 

Many of these salts are water-insoluble. They are made this way to avoid bleeding and some other reasons. I would imagine the insoluble salts will clog the feed.

 

I am curious about the biocide/funigicide also. Salicylic acid doesn't sound right, if not for the cost alone. I wonder if Potassium Sorbate will work.

Fountain Pen Travel/display Case out of stock now. Found new materials. People in the wait list will be contacted, slowly. Thank you!

Link to comment
Share on other sites

 

AND you will have to add a fungicide, (biocide is the new term), because if you don't, you'll either have mold or SITB... or both in 3-4 days.

 

 

What biocide/funigicide are used in ink now-a-days? Also, won't certain types of bacteria grow in ink?

 

Hello Thorn,

 

I'm not sure what biocides are being used by today's ink companies. When I was mixing my inks a few years ago; Dowicil 75 was the norm; prior to that, about 3 decades ago and before- Phenol was the norm. Phenol is no longer available to the general public due to possible health risks. (Except in Cloraseptic throat spray :huh: :ltcapd: ).

 

Try to find some of SamCopote's threads on Biocide Shootouts, etc., he did exhaustive research into all different types and styles of biocides and is also on a first name basis with several current ink manufacturers.

 

I'm not sure I follow your second question; yes, certain types of bacteria and fungus do grow in ink; hence the use of biocides to destroy them before they destroy the ink... and perhaps your pen. Hope this answers both of your questions, if not, please lmk.

 

All the best,

 

Sean :)

Edited by S. P. Colfer

https://www.catholicscomehome.org/

 

"Every one therefore that shall confess Me before men, I will also confess him before My Father Who is in Heaven." - MT. 10:32

"Any society that will give up liberty to gain security deserves neither and will lose both." - Ben Franklin

Thank you Our Lady of Prompt Succor & St. Jude.

 

 

Link to comment
Share on other sites

Many textile dyes have salts in them, which makes them unsuitable for pen inks. You would want to confirm what else is in the dye powder other than the dye before turning some in to ink.

 

 

Wouldn't the salts remain in solution, even in the pen?

 

Many of these salts are water-insoluble. They are made this way to avoid bleeding and some other reasons. I would imagine the insoluble salts will clog the feed.

 

I am curious about the biocide/funigicide also. Salicylic acid doesn't sound right, if not for the cost alone. I wonder if Potassium Sorbate will work.

 

 

I guess the salts are kind of a mordant for fastness of the dyes?

 

 

I wonder if sodium benzoate would work? I see it listed in food coloring. It needs a lower pH.

Link to comment
Share on other sites

 

Hello Thorn,

 

I'm not sure what biocides are being used by today's ink companies. When I was mixing my inks a few years ago; Dowicil 75 was the norm; prior to that, about 3 decades ago and before- Phenol was the norm. Phenol is no longer available to the general public due to possible health risks. (Except in Cloraseptic throat spray :huh: :ltcapd: ).

 

Try to find some of SamCopote's threads on Biocide Shootouts, etc., he did exhaustive research into all different types and styles of biocides and is also on a first name basis with several current ink manufacturers.

 

I'm not sure I follow your second question; yes, certain types of bacteria and fungus do grow in ink; hence the use of biocides to destroy them before they destroy the ink... and perhaps your pen. Hope this answers both of your questions, if not, please lmk.

 

 

I was thinking that you were saying only fungus would be a problem.

 

There is a lot of compounds that could work. Chloroxylenol? It's used in antibacterial soaps. There are several name brand biocides: Nuosept, Nopocides, Troysan etc.

 

I think SamCopote found that Sporicidin worked. I think it has phenol. It is interesting that it's still used in throat spray... :yikes:

 

There are some reactive dyes here:

 

Reactive Dyes Link

 

I would guess they have a minimum order size.

 

Thanks, Greg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...