Jump to content

Taking apart a 146 nib assy.


hari317

Recommended Posts

Preamble:

 

I received this modern 146 a few weeks back. Bought it from a reputed ebay dealer and it was all the more attractive to me because of the 18K two tone nib fitted to it. The pen was in pristine condition when I received it, except that the dealer had not flushed the pen before sending it to me. Despite cleaning the cap, I was still getting inky fingers of the previously filled ink, Ink had seeped between the section and the nib carrier, necessiating its removal and refitting. The Indian MB service wanted too much money to do this, so I set out to buy the tools to do this job, I looked at the usual sources, but then discovered that the slot on my latest 146 was diffrent from the slots on my 80's 146, MB had changed the slot design in its modern 146 nib carriers and the older extractors did not fit, this was confirmed to me by our ever helpful FPNer Niksch who patiently answered all my questions. Thanks Niksch!

 

However I could figure out the new slot position geometry and then got in touch with our pen wizard Francis Gossens aka Fountainbel. He immediately set out to design a nib removal tool from the very rough sketch that I had drawn up and had the prototype ready to ship the very next day. Well it arrived today at my home and yes the tool worked very well. Thanks Francis!

 

The slots on an old 146:

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3178.jpg

 

The slots on a newer 146:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3180.jpg

The Fountainbel 146 tool:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3208.jpg

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3209.jpg

 

The tool slid onto the nib carrier:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3210.jpg

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3211.jpg

 

The nib carrier unscrewed halfway:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3212.jpg

 

The nib unit completely removed:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3213.jpg

 

Thread details:

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3215.jpg

 

The MB "bubblegum" sealant remains:

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3216.jpg

 

The original sealant comes out like pencil shavings as you unscrew the nib carrier, I am pretty sure it is a Sil-RTV kind of sealant.

 

The section without nib carrier:

you can see the step that holds the threads for the nib unit. There is no sealing between the nib carrier lip and the lip of the section, ink can seep in into the annular gap while filling the pen and slowly leach out.

 

http://i264.photobucket.com/albums/ii197/hari317/MB146/IMG_3219.jpg

 

I hope this photo guide will be helpful in case any one wants to re-seal their nib units and always consider myself lucky to have found and joined FPN where everyone is so eager and free to share knowledge.

 

Cheers,

Hari

 

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • Mister Mont Blanc

    6

  • hari317

    5

  • talkinghead

    3

  • jigesh

    3

Awesome Photography!!

Parker

51 set

21 set

21 Desk sets

Sheaffer

Preludes F M BP

Imperials

Snorkel Sentinel Admiral Statesman

Craftsmen

No-Nonsense M Italic

Reform 1745

Waterman Phileas F M

Might like a 149 someday!!

A bad day on the water is better than a good day in the office

Link to comment
Share on other sites

Great pictures! what kind of sealant will you use?

 

A

MB 149 YWC, MB Doue BP, Parker Sterling Silver Cisele BP & RB

Link to comment
Share on other sites

Glad to hear the tool works well Hari !

Very professional pictures, congratulations !

Francis

Edited by fountainbel
Link to comment
Share on other sites

Wow, this is great!

 

...I need to get one like that.

 

 

Also I think it would be interesting if it would be possible to design a tool which will allow to remove nib and feed only. This way you would not have to re-seal the nib carrier when putting everything back together.

 

I was thinking about a tool which whill grip both nib and feed very tightly (...gripping the feed in a small gap) so you could pull them out together from the carrier.

 

Cheers

 

Michael

 

 

Link to comment
Share on other sites

Where do you get a new seal?

I did one for the first time a couple of months ago and niksch recommended clear silicone bath sealant when I asked for advice. I went ahead with the white stuff I had in the shed (after all MB used pink!) and have no problems six months on.

 

Edtied to say thanks for the photos - I forgot to take any when doing mine; I was frustrated that every person asking about disassembly was told that MB service would be a better route for repair.

Edited by soapytwist

"Truth can never be told, so as to be understood, and not be believ'd." (Wiiliam Blake)

 

Visit my review: Thirty Pens in Thirty Days

Link to comment
Share on other sites

Don't think I've got the stomach to perform DIY on my pens.

 

I trust the result was what you'd hoped for?

My Collection: Montblanc Writers Edition: Hemingway, Christie, Wilde, Voltaire, Dumas, Dostoevsky, Poe, Proust, Schiller, Dickens, Fitzgerald (set), Verne, Kafka, Cervantes, Woolf, Faulkner, Shaw, Mann, Twain, Collodi, Swift, Balzac, Defoe, Tolstoy, Shakespeare, Saint-Exupery, Homer & Kipling. Montblanc Einstein (3,000) FP. Montblanc Heritage 1912 Resin FP. Montblanc Starwalker Resin: FP/BP/MP. Montblanc Traveller FP.

Link to comment
Share on other sites

Thanks, Hari; nice pictures and very informative post. Impressed by the ingenuity of your and Fountainbel's customized solution....

Link to comment
Share on other sites

Hari, this is a great post and precisely why I frequent FPN. Where else would one get this kind of information? Like BrandonA, I am not sure I would feel comfortable doing this myself, but it is very cool to see others do it successfully.

 

Sean

Link to comment
Share on other sites

Thanks for all the comments! For now, I have used a generous amount of silicone grease, but I plan to use a locally made single part Silicone RTV sealant called Anabond 666 available in 100gm tubes. Pls take care not to overtighten the feeder case while refitting, high likely hood of it breaking.

 

Best,

Hari

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites

  • 3 weeks later...

A summary of this and the "piston-lubing" threads by Hari can be conveniently found in the attachment posted/attached here.

 

 

In the FWIW catagory; Two or three years ago, I used Tryphon section sealant on a 146 and I have had no problems since.

Best regards, Ken.

 

 

Thank you, Ken. If these two threads populate more with useful information (like you just added), I would be happy to re-compile/update the PDF attachment.

Link to comment
Share on other sites

Also I think it would be interesting if it would be possible to design a tool which will allow to remove nib and feed only. This way you would not have to re-seal the nib carrier when putting everything back together.

 

I was thinking about a tool which whill grip both nib and feed very tightly (...gripping the feed in a small gap) so you could pull them out together from the carrier.

 

 

Michael, since the feed and nib are friction fit into the feeder case, I'd be concerned about damaging either the feed or nib. Particularly the most modern/current feed because the fins are so delicate. Using section sealant from Tryphon or Pendemonium or an equivalent product is the way to go if the nib assembly must be removed from a pen.

 

Eric

Hard times don't last, but hard people do.

 

Thank a Veteran.

 

Link to comment
Share on other sites

thanks for sharing :)

Pens are like watches , once you start a collection, you can hardly go back. And pens like all fine luxury items do improve with time

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Announcements


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...