Search the Community
Showing results for tags 'kit pen'.
My dad got a lathe for Christmas and he immediately started turning pens for me and my mom. What are your recommendations for good sources for the pen mechanics? He's less familiar with the writing aspect than the woodworking and wants to make sure he gets good parts. Thank you!
Hi all, I am new to fountain pens, and my parents gifted me a hand turned kit pen for my birthday recently. I really love the pen itself, but the nib has had some hard starting and flow issues. I was just wondering what replacement nib options I had to choose from. I have included three pictures of the nib, let me know if you need more. The graph paper is 4 squares per inch in the background. The nib says "Iridium Point Germany" and takes short international standard cartridges. Thanks for all your help, Obsidian
BLACKSTONE AXIOM This pen was available for review on FPN for review and was made available by Just Write Company and I happened to be at right place at right time and also I was lucky enough to be selected amongst many to review this pen. I thank Kevin for sending me across the pen and later on the inks too for review. I have extensively used this pen and this actually is detailed review of the pen. DESIGN & BUILT: 3.5/5 The pen arrived in very well packaged PU leather zip case along with the spare JoWo nib as the pen was available for review with two nib options. Blackstone Axiom – Arrived in PU Leather Case The pen is available in 2 options with 3 different trims. Two finishes were PU Leather and Carbon Fibre , both in black colour. And the trim options were Gold, Silver and Black Titanium. And I opted for the PU leather finish with black titanium trim. Well it is actually a kit pen and is known as CHURCHILL FOUNTAIN PEN KIT. Blackstone Axiom – In the wild The pen arrived and the first impression was “Wow.. its a hefty pen” and in actual it weighs around 30 g when uncapped. I think the Jinhao 159 almost weighs in the same category. Blackstone Axiom – Beauty shot The pen is made of brass except the ABS plastic grip section. The finials are brass also with black paint finish. The cap and barrel are finished with very nice warm textured PU leather finish. It feels very good in hand unlike the cold metal in your hand. I can almost compare it with feel of ebonite in my hand. The pen is cylindrical with rounded edges and bullet shaped bottom finial which is painted and I think this finish will wear off after some wear and tear. The grip section has hourglass design, which I really like. Blackstone Axiom – Capped Blackstone Axiom – Uncapped The pen is well detailed out with nice addition of trims with double centre band and triple band at bottom of barrel. There is also one band at cap top along the clip. All are nice and sturdy. There is small O ring at the junction of cap and barrel also. Blackstone Axiom – Barrel PU Leather Finish Overall the pen is very well finished and executed in detail and is very well built and I must say the quality control was stringent as the pen I received had perfectly aligned rings at regular spacing. The cap has cylindrical finial in painted finish and the centre portion of the cap has PU Leather finish and the cap lip is again painted finish with double bands. As far as cap clip is concerned I really like the design and the clip is stiff and sturdy but not springy. Blackstone Axiom – Cap Birds Eye View Blackstone Axiom – Cap Top View Blackstone Axiom – Cap Side View Blackstone Axiom – Cap Inside view As far as the branding goes the name “Axiom” is not mentioned anywhere, only brand name “Blackstone” is mentioned below dual centre band on cap. Below are the few images showing comparison of pen with other pens: Capped – Blackstone Axiom, Parsons Italix, TWSBI Eco, Ranga Model 3 (from bottom to top) Uncapped – Blackstone Axiom, Parsons Italix, TWSBI Eco, Ranga Model 3 (from bottom to top) Angled View – Blackstone Axiom, Parsons Italix, TWSBI Eco, Ranga Model 3 (from right to left) I must say its a very well built pen. Though the pen is hefty some may not like it (e.g. my wife) but I do like it. This pen looks classy. Few things i don’t like are triple bands at bottom, I think dual bands would have served the purpose well. BALANCE : 3/5 As I mentioned earlier the pen is a hefty one and the bottom finial is also heavy which actually balances the brass barrel. Thus this pen is a bottom heavy pen. Pen is well balanced when writing cap unposted but cap posting makes it unbearable (yes the cap posts securely). Below are the pics showing comparison of pen length while writing posted or unposted: Blackstone Axiom – Writing with cap unposted Blackstone Axiom – Writing with cap posted When cap is not posted most of the weight is in centre but when cap is posted at back more than 2/3 rd weight goes to the back, thus making it uncomfortable. Some specifications are as below: Length uncapped : 125 mm (including nib)Length capped : 140 mmDia of Barrel : 13.5 mmDia of Section : 9.5 to 11 mmWeight of pen (capped) : 49.11 gWeight of pen (uncapped) : 29.4 g Blackstone Axiom – Weight with cap Blackstone Axiom – Weight without cap NIB & INK FILLING MECHANISM: 5/5 The pen comes with option of #6 JoWo Ruthenium nib in EF, F, M, B, 1.1, 1.5. I took up M and 1.1 and this particular review was written with 1.1 calligraphy nib. It wrote amazing and very well. Even though JoWo nibs have never disappointed me still I have had bad experience with JoWo #5 Chrome finish 1.1 nib but this one was amazing even the ruthenium finish was matching with black titanium trims. Blackstone Axiom – Nib Unit Top View Blackstone Axiom – Nib Unit Side view Blackstone Axiom – Nib Unit Bottom view Ink Filling is via converter or cartridge. The pen comes with good quality converter which is not Schmidt made. The pen can’t be converted to eyedropper as it is a metal pen. Blackstone Axiom – Taken Apart – Ink filling via converter CONCLUSION: It is extremely well built hefty kit pen with excellent #6 JoWo Ruthenium nibs. Priced around 70 USD puts it in mid range segment. I recommend this to people who want hefty and classy looking pen. For more images and handwritten samples kindly visit my blog here : MEHANDIRATTA
I've had this green acrylic sitting around for a while, and an Aristocrat fountain pen kit. So I combined the two on my Harbor Freight lathe and came up with this: Next I'll have to try a kitless, about how many 4 1/2 inch blanks does it take to make a kitless?