Search the Community
Showing results for tags 'injection molded plastic'.
Let me outline my problem so my question will make sense... I have a no-name gold filled pen with a flex nib that I got for what I could afford off the ___bay. (That is to explain why I am not taking the exceedingly rational course of just packing this up and sending it to someone who knows what he is doing.) I managed (through injudicious use of tools in an attempt to remove a piece of pressure bar) to break what seems to be the Bakelite part of the barrel which is threaded so the cap can screw on, and smooth on the inside so the section can fit in. Little pieces of this black material are missing. Given my latheless state, after much consideration I decided that probably my best bet is to fit a collar in there and then do what I can with epoxy to repair the thread part, but to rely on the collar to keep the section in. Obviously this means the section will need a little sanding after all is said and done, but I can do that by hand. Looking around at what's here, it seems to me that part of the barrel of one of my 20 cent pre-FP life Write Bros. Pens will probably do the trick. Plan is to carefully mark what part of the slightly sloping barrel I need for this, cut it, make sure it fits, and then glue it in there. The question is what glue to use. The barrel is soft, injection molded plastic, the other stuff really strikes me as being possibly Bakelite. I do understand, as I mentioned earlier, that the optimal fix would be packing it neatly and sending it off to someone who knows what he or she is doing, but the pen was on a par with the rest of my pen budget, and a repair will require a skill and amount of time that will exceed several times the price of the pen, and which is not in the budget. Any advice will be appreciated! Thank you T