Search the Community
Showing results for tags 'nib'.
-
Hi, I am looking for the best pen for signing documents. It should show better my signature. According to articles and advice that I read; ''Signature nibs should be Broad or BB, because a signature should never look tentative or weak - a signature should have visual impact, and convey strength and presence.'' (by yachtsilverswan) So I think EF, F (maybe M) aren't suitable for me? In my opinion the best way try them at pen shop, but I want to learn that which issues (nib, oblique, stub etc.) should I focus? What do you think about this? I am looking for a pen for beautiful signature. I have got a no idea about pens, nib, stub, ink etc. I want a pen for usually signing maybe sometimes take notes or writing. but my priority is signing. So what is the best pen (roller, ball-point, fountain) for you? Of course nib size, stub, oblique or straight etc. What are your suggestions? Thank you very much
-
A while ago I discovered this pen thrown around a draw... It was a cheap Chinese pen with a marble-like body and oak cap finished with chromed fittings. The nib was damaged and tines blended apart. Moreover the ink cartridge was damaged and it leaked blocking off the feed and leaving horrible strains in the body. so yesterday I decided to dive the body into a weak bleached solution and restore the feed. As the nib was completely damaged and I had a spare semi-flex steel nib from fountainpenrevolution I decided to try a swap... First attempt was a completely fail. The nib´s body diameter was just too big to generate enough pressure against the feed so the ink didn´t flow at all... Then I decided to cut part of the body of an old falcon nib from a drip pen and press it between the pen´s nib holder and the nib so it created extra pressure... And voilá! after converting it into an eyedropper, the pen works perfectly! Some work needs to be done in the feed to allow more flow as the previous nib was extra fine and this is medium. Also as the nib has some flex, the feed can´t just deliver enough ink so this weekend I´ll do some work around it. After 20 mins of work and 7 pounds spent on a nib and some silicon grease, I have a semi-flex pen that behaves very well for everyday use This morning as I had to do some work with the feed, I also decided to tweek a little bit the nib and give it some polish...
-
Hello, I'm new to Esterbrooks, and to vintage pens in general. I just got a lovely restored SJ off of Ebay. It came with a 2668 nib, and when I use it, it's quite scratchy in a weird way: it seems like there's an incredibly tiny "sweet spot" where it will lay down a perfect line, but even the slightest natural tilt when moving one's hand across the page feels paper-gouging sharp. I'm not pressing hard, and my grip is good; I've never had this issue before. Is this a known quality of this size/type nib? Should I (delicately) use a nail buffer, or what? Thanks, ~Dorothy
-
Hello everyone I have just registered this site hoping that I could have my problem solved,hopefully. I have a laureat fountain pen(I think it is newer version) that has a broken nib. Because it was a gift from my father, I have been trying to finda replacement nib but so far no good. Is there any site or person who sells them? I do not have much money so I just want the nibs . If you guys know any sites or if you are willing to sell me one please reply so that we can talk about it. Sorry if my english sounds strange( i am a foreigner) and thank you in advance.
-
Need Help Finding A Vintage Majestic Fountain Pen Nib, I Just Broke Mine.....
onatorrent posted a topic in USA - North America
Hello all, I am quite new to the FPN and I really have found this site to be very useful and everyone so friendly and helpful. I am also a new collector also as my area of knowledge is with External Horned Phonographs from 1877 to 1929 but fountain pens are new to me and I am finding great joy in collecting and using them. Currently I was writing with my Majestic Fountain Pen and broke the 14K Majestic nib. Anyone know of where a good place to start looking for a replacement? I love this pen and so upset with myself for breaking the nib. I have search everywhere I can think of and checked Ebay but now I am at a loss. Any help would be of great help being a newbie. Thanks much for any help you can provide. Kenneth Keeton -
I have seen some nibs for sale on line advertised as #6 or #5 nibs. What does that mean?
-
The Montsailor. Not For The Feint Of Heart.
Ytland posted a topic in Fountain & Dip Pens - First Stop
Hi all, For a long time I've been a big fan of MontBlanc 146 pens: their balance, huge capacity and great feel in hand are (in my opinion) unrivalled. I could never get over their nibs though; mushy, unexpressive and often requiring significant work before they wrote as I preferred. (What can I say? I'm picky when it comes to nibs). Enter the Sailor pen company. With woeful size and balance for my hand, the lack of girth and weight were a surefire recipe for hand cramps after a few lines of writing. But the nib was otherworldly. Just unparalleled. So... the solution? http://s2.postimg.org/jad4o9w4p/IMAG1326.jpg http://s2.postimg.org/ae2ckc5ih/IMAG1327.jpg http://s2.postimg.org/dbzbe1d61/IMAG1325.jpg http://s21.postimg.org/vro59fjev/IMAG1328.jpg I haven't seen this done before, and in all honesty I wouldn't recommend it if you have any true love for your pens or can resell them, but both the sailor and MontBlanc had cosmetic issues that would have decimated their resale price. So instead I hacked together a workhorse. An ebonite feed is required for heat-setting to fit the new shape and curvature of the Sailor nib. Let me know what you think! -
Hi everyone from Turkey. As you know I am new here I am looking for a pen for good signature and I meet FPN while I was looking at information about my research at internet. I have got a no idea about pens, nib, stub, ink etc. I want a pen for usually signing maybe sometimes take notes or writing. but my priority is signing. So what is the best pen (roller, ball-point, fountain) for you? Of course nib size, stub, oblique or straight etc. Thank you very much
-
Is it really an Esterbrook nib or is it a QA issue? I would like comments from anyone having purchased an Esterbrook nib that had its tip ground to resemble a block sheave - )( - front to back and/or has asymmetrical shoulders/tip material. Two nibs (2556 and 1461) had material scalloped out from the center of the tip but not matching the shoulder curve. I lost the tip material trying to remove the problem of severe scratching caused by the grind marks -- ended with two good working (Fine?) cursives. Before these problamatic nibs, I had purchased my first SJ with a very good 2668. This nib was made in the US and from the get-go laid ink almost perfectly. A little polishing and so smooth (was like butter but roughed it cause I like some read) one could write effortlessly all day. I have included a couple pics each of the 2668 and the two working cursives for comparison. Unable to provide a macro of the 2668's tip profile with avail cam, but viewers should be able to notice it does not have a - )( - shape. Eventually I may reposition this NOS nib in its collar but it's been boxed some time now. The uneven tip seen face side (E2668.1) was taken care of. I currrently have no Fine nibs to compare the cursives with. I made very rough measurements of the stroke width (0.5mm) from the 2556 using a 10X and a finely etched ruler. Not sure where I will purchase my next nib(s), but I seriously doubt it will again be the internet monster vendor machine unless someone in FPN can vet the posting seller. Hopefully I will find a couple of good Fine nibs so I can post writing samples from these "customized" nibs. Pics: E2668.1 - Demo good shoulder/tip symmetry - no sheave shape.E2668.2 - Good tip material shape.E1461.1 - Bad tip portion ground down - slightly wide tip for a Fine but now symmetrical with shoulder curve.E1461.2 - Tip also beveled in, shaping foot into a ~Fine cursive.E2556.1 - Tip shaped to match shoulder curve.E2556.2 - Cursive with sufficient material for wear.
-
Hi all, I really like fine nibs, so I'd love to have an extra-fine nib on my 51. Are "accountants" nibs extra fine? Does anyone either have one going spare that they'd sell / exchange for a medium-to-broad, or know where I could find one? Best wishes Robin
-
Hello, I'm looking for a replacement nib for my Sheaffer Targa 1003 (full size) gold finish. I imagine these are pretty hard to find but I thought I'd see if anyone at fpn has one, or knows where I might find one. My ideal nib would be NOS medium, but I would be happy with lightly used.
-
while i do not(yet) repair pens myself, i have something that may be useful when adjusting nib tines. The Eye Clops microscope is a handheld digital microscope, and does 100x, 200x, and 400x magnification. it has lights built in to light up the object, a screen showing the magnified object, and can take picture or video, if need be you need to post it somewhere. downside is, im not sure how practical it is, and you dont really need the 200x and 400x for obvious reasons. another downside is the need to hold the pen and the microscope, unless you can figure out a mount for the scope and pen, because its a bit tricky to adjust the pen correctly to the microscope at such high magnifications. a pen mount is optional but will free up both hands and keep you from having to adjust it to keep it a sharp image. i would post samples but im having quite a time finding the usb that plugs into the top...
-
Hello All, I have recently purchased a Waterman 52 1/2V fountain pen with a flexible nib and have restored it to good condition. However, I find the flow to the nib to much too wet. Both the hairlines and the broad lines pool with ink, and sometimes the broad lines will be nearly black when using my diamine midnight ink. The pen is practically incapable of writing on cheap paper due to excessive feathering. Is there a way to reduce the flow? I am sorry if there were other resources with this information, but I could only find information relating to reducing the ink flow to a firm nib, which included adjusting the tine gap. Obviously, this would not prove very effective when the tines flex. Also, another minor question. I have aligned the tines on the nib when the nib is off the pen, but when placed into the section with the feed, the feed pushes unevenly on one tine, slightly misaligning it. It still writes, as the issue is small, but will I need to sand the feed down to be more even if I want this problem alleviated? Thanks for the help, Allan
-
I would really appreciate some advice I have a pen for sale on ebay that I have made some presumptions about based on an internet search and hope not to mislead in the advert but on the other hand dont want to sell myself short. the pen has a 14k nib says Parker Moderne made in canada on the side and has a cap at the base which unscrews, there is though nothing under the cap and I believe there should be a plug or something similar (no idea on terminology!) I am slightly confused as to whether this is a depression/ thrift pen or not. Is it correct some were made in Canada and some in the USA? any advise would be most welcome regards 22johnny22
-
I was hoping for some help (and I am not honestly using this to plug something I am selling on ebay!) I have an electoplated gold sheaffer white dot fountain pen with a 14k gold nib and have put it up for sale with no reserve. I fully understand that the scrapping of nibs is not condoned on FPN and I fully support this. On this basis I genuinly dont want anyone else to do it so what should the reserve have been set at. I will strongly consider buying it myself to prevent it going for nothing, so to speak. any advise would be most welcome regards 22johnny22
-
My grandmother insisted I take my grandfather's pen. Even though, by the looks of it, it's not going to see much use at all. It's with me purely for sentimental reasons. And yet, I cannot keep hoping that some day I would be able to fix it and use. My mother has the exact same pen, but that one works wonderfully well. It's got a 14k gold nib which puts down a very fine line. I'm assuming that this model is from the 1970s. It's a Pilot of course. But I don't know which model. I was wondering if it would be possible to fix this. The nib is gone, the ink sac is all but gone, and the ink chamber comes off. But the real issue may just be the nib. I don't know the model, so can't Google the nib compatibilities. I live in New Delhi, India, so it won't be easy for me to send it abroad to a skilled nibmeister. And I don't know of any here. But it would be great if someone could tell me the model of this pen. Seeking spares would become infinitely easier. Thanks a ton! Photographs follow. Images can be disturbing. Viewer discretion recommended.
