Search the Community

I've been quite dissatisfied with the nib of my Parker 51. It had some sort of a broad nib, maybe a factory oblique, maybe worn out, maybe ground by someone. We'll never know. I had two issues with it: This shape was probably never meant for left-handed use.The nib had a very narrow sweet spot and produced extreme skipping and scratchiness outside it.It was too broad for my taste.If you look at the pictures, you can see that it had this weird angled surface at the end of its tipping. That surface was the sweet spot. So I took the plunge and decided to do something about it. I went into an OBI shop to buy some grinding stuff - unfortunately, the finest they had was K1200. Anyway, I thought I'd experiment with more, so I bought a K240, K600 and K1200. I took off the hood (fortunately I hadn't sealed it yet) and took out the nib for a ride. K240 was useless, probably too rough to do anything to the nib. K600 was quite nice - I could very quickly grind away the angled surface and make the two tines equally large. After that, I flattened the top and bottom a bit, just enough to give a little line variation, but I wouldn't dare call it italic. At this point, the nib felt already better and didn't skip anymore. But it was very scratchy. I grabbed the K1200 paper and started to polish it. First I just stroked it on the grinding surface, then I inserted it into the collector and started moving it as if I was writing with it. Finally, I put together the pen, filled with some ink, and tested it. Then I polised some more, writing actual words on the K1200 paper. (Ink could be wiped off from it with just a paper tissue.) Here's how it looks: As a result, I no longer have any issues writing with it left-handedly. The nib has a new sweet spot which is much wider than before and now fits the way I hold the pen. I guess I could still make it even better if I had more patience and an even finer piece of polishing paper. Here are some thoughts for anyone that wants to try it at home. Only do this to pens that you wouldn't feel very sorry about, should you ruin the nib.Be very careful. You can't grow back what you ground off.You really don't need to apply much pressure.Grinding paper is probaly not the right tool, but it can do the job.The finer grinding surface you can use, the smoother your nib will be. Thanks for reading! If you have any advice on how to do it even better, I'm always curious to know more.