Jump to content

Guider Acrylic

hari317

By hari317
in India & Subcontinent (Asia)

 Share

Recommended Posts

hari317 Museum Piece

hari317

Posted
Posted

Guider, Ratnamson and Ratnam are three companies who make handmade pens in a small town called Rajahmundry in the state of Andhra Pradesh in South India. The workers are traditional goldsmiths who specialise in making gold nibs. The industry started after the call of Mahatma Gandhi to manufacture goods in India which were then being imported (Swadesi Movement).

 

Following photos are of a Guider which I purchased a few months back and have been using since. The pen is made of Red colored acrylic. The section and feed are made of Ebonite and the filling system is ED.

 

The size of the pen is around 5 1/2 inches; a medium sized pen:

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0001.jpg

 

The clip has the name GUIDER imprinted in the fashion of vintage Parker clips:

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0002.jpg

 

The cap posts securely. The body shall be replaced by the manufacturer in case of any problems if a gold nib pen is purchased. Somewhat like a Life Time Guarantee(Cost of the bare pen is negligible compared to the gold nib).

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0006.jpg

 

The Nib imprint says GUIDER Pen, 14CT, S INDIA (South India):

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0004.jpg

 

A front view of the nib:

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0005.jpg

 

A closeup of the ebonite feed:

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0003.jpg

 

A closeup of the nib tip. The left hand side tipping has a blemish but the pen is super smooth with a good flow:

 

http://i264.photobucket.com/albums/ii197/hari317/Guider%20Acrylic%2014C/res0007.jpg

 

Overall the pen is good and is a nice example of an Indian handmade pen. This is the manufacturer's Website. I have no affilation with the company, just a happy customer.

 

Cheers,

Hari,

INDIA

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • hari317

    5

  • Abhik

    1

  • Tweel

    1

  • Ondina

    1

Popular Days

Top Posters In This Topic

Popular Days

hari317 Museum Piece

hari317

Posted
  • Author
Posted

This particular model cost me around 60USD. Photos of some of their other models are shown on their website as well.

 

Best,

Hari

 

great looking nib... how much do they sell for?

 

 

 

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
PaulK Extremely Rare

PaulK

Posted
Posted

Hari, truly a beautiful pen & certainly a bargain too. As an ED filler, is there a gasket or some other method used to ensure a tight seal? I'm certain you are going to receive a number of follow-up inquiries about Guider and the other Indian manufacturers.

 

Paul

A dreamer is one who can only find his way by moonlight, and his punishment is that he sees the dawn before the rest of the world.

 

~ Oscar Wilde, 1888

 

http://img356.imageshack.us/img356/7260/postminipo0.pnghttp://img356.imageshack.us/img356/8703/letterminizk9.png

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
  • Author
Posted

Hi Paul, There is no O-ring or ink shut-off mechanism. Personally I use Silicone Grease on the threads. Has not leaked as yet. Just you have to take care to keep the nib upright when storing the pen with ink.

 

Best,

Hari

 

 

 

 

Hari, truly a beautiful pen & certainly a bargain too. As an ED filler, is there a gasket or some other method used to ensure a tight seal? I'm certain you are going to receive a number of follow-up inquiries about Guider and the other Indian manufacturers.

 

Paul

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
lalindsay225 Vintage

lalindsay225

Posted
Posted

That's a lovely pen, Hari! I wish Guider and Ratnamson would consider taking orders from U.S. customers.

 

Lisa

Love all, trust a few, do wrong to none.

 

Lisa in Raleigh, NC

Link to comment
Share on other sites
Abhik Extremely Rare

Abhik

Posted
Posted (edited)

Hi Hari! Lovely close ups. I liked nib finishing & it is better than my Ratnamsons 14C hand made nibs. Feeds look like same, may be sourced from same manufacturer.

Enjoy your pen.

Abhik.

Edited by Abhik
Link to comment
Share on other sites
Tweel Collectors Item

Tweel

Posted
Posted

It's interesting... I could be wrong (naturally), but from the look of the clip in the closeup, and the nib in its first closeup, it seems like they might be casting their metal parts instead of rolling/stamping them.

 

-- Brian

fpn_1375035941__postcard_swap.png * * * "Don't neglect to write me several times from different places when you may."
-- John Purdue (1863)

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
  • Author
Posted
It's interesting... I could be wrong (naturally), but from the look of the clip in the closeup, and the nib in its first closeup, it seems like they might be casting their metal parts instead of rolling/stamping them.

 

-- Brian

 

 

I don't know about the clip( it could be forged and stamped with a crude die), But the nibs start out as flat triangular sheets and are hammered into shape using a curved nib block and a tapered pin to give the nib the required curvature. I have it from the owner that the tips are attached using open flame rather than electric welding, whereas Ratnamson does electric welding of the tips.

 

Best,

Hari

 

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites
hari317 Museum Piece

hari317

Posted
  • Author
Posted
That's a lovely pen, Hari! I wish Guider and Ratnamson would consider taking orders from U.S. customers.

 

Lisa

 

I too wish they start selling pens to overseas customers directly, their's is a small business and it would be a huge boost for them. Maybe they are reluctant because exporting any item out of India has its own legal hassles/paperwork. Another issue may be in receiving payments since most of them are not computer savvy and may only be able to receive demand drafts or money orders.

 

Regards.

Hari

 

In case you wish to write to me, pls use ONLY email by clicking here. I do not check PMs. Thank you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33563
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26746
    5. jar
      jar
      26101

  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      Links to web pages or articles about Chinese typesetting, signwriting, etc.

      By Shanghai Knife Dude · Posted

      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      Skeleton of a primer for a budding hobbyist

      By A Smug Dill · Posted

      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Skeleton of a primer for a budding hobbyist

      By adamselene · Posted

      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Skeleton of a primer for a budding hobbyist

      By A Smug Dill · Posted

      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      Skeleton of a primer for a budding hobbyist

      By adamselene · Posted

      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o

  • Chatbox

    You don't have permission to chat.
    Load More

  • Files






×
×
  • Create New...