Jump to content

The Fountain Pen Network uses (functional) cookies. Read the FPN Privacy Policy for more info.  To remove this message, please click here to accept the use of cookies


Registration on the Fountain Pen Network

Dearest Visitor of the little Fountain Pen Nut house on the digital prairie,

Due to the enormous influx of spammers, it is no longer possible to handle valditions in the traditional way. For registrations we therefore kindly and respectfully request you to send an email with your request to our especially created email address. This email address is register at fountainpennetwork dot com. Please include your desired user name, and after validation we will send you a return email containing the validation key, normally wiithin a week.

Thank you very much in advance!
The FPN Admin Team






Photo

Cartier Vendome Ink Cartridge Problem

cartier vendome cartridge

  • Please log in to reply
9 replies to this topic

#1 Bytebuster

Bytebuster

    Near Mint

  • Member - Silver

  • PipPipPip
  • 25 posts
  • Location:Living in Belgium and working in The Netherlands; living very close to the border.
  • Flag:

Posted 07 July 2020 - 21:09

Hi there to all,

 

A few weeks ago I bought a Cartier Vendome fountain pen which is unused.I did not know that it was difficult to find cartridges for these pens. I'm still looking for some cartridges. Luckily a friend of mine had three cartridges. The pen was his father and it was lost or stolen, but he would still have some cartridges. Anyhow It was three cartridges. I got them and I try to install one of them, but it doesn't get punched. I tried it many times and push it very good, but the ball does not come lose. If I take the cartridge system in my hand in push the cartridge all the way up, then I see some space at the bottom. I don't know there should be placed something there, or is this normal? Does anyone have any experience with Cartier Vendome fountain pens on this matter?

 

Cheers to all,

Byte



Sponsored Content

#2 austollie

austollie

    Pelikano Super

  • Member - Gold

  • PipPipPipPipPip
  • 113 posts
  • Location:Sydney, Australia
  • Flag:

Posted 07 July 2020 - 23:12

Hi Bytebuster,

 

I am not familiar with that particular model of fountain pen, but modern Cartier fountain pens use standard international cartridges and those should be available from any good pen store.

 

As far as pushing the cartridge into the pen is concerned, I am not a fan of applying excessive force.  For older pens (where the plastic may be brittle), it is possible to snap the post off the feed.  If I were in your situation, I would try pushing the little ball into the cartridge outside of the pen (or first inserting the cartridge into a cheaper pen).  That said, most quality cartridges do not require a lot of force, when first inserted, i.e. it is possible that there is something amiss with the cartridges that you've been given.  Again, one trip to the pen store should resolve that.

 

The other solution that you can consider is purchasing a converter and bottled ink.  The converter should slide right in.



#3 praxim

praxim

    still on twig

  • FPN Supporter - Rhodium

  • PipPipPipPipPipPipPipPipPipPipPip
  • 5,463 posts
  • Location:Not upon the peneplain
  • Flag:

Posted 08 July 2020 - 02:36

This is the reason I held back from buying a Cartier Vendome on which I was near to acting. From what I have read, and I would love it to be found incorrect, there is simply no available cartridge or converter which fits the Vendome other than originals. 


When you receive new information you can change your mind, or you can close it; or you can try shooting the messenger.

#4 Parker51

Parker51

    Old dog

  • Member - Gold

  • PipPipPipPipPipPipPipPipPip
  • 1,749 posts
  • Location:North America, U.S.A., Ohio, Delaware Cty
  • Flag:

Posted 08 July 2020 - 04:33

That is correct, the cartridges are proprietary, oval shaped and the pen never had a convertor when it was sold and it appears that a convertor was never designed or made for it. Since then it appears that no one has either made an adapter to use a different cartridge, or a convertor, but perhaps some day someone will.

In the mean time I wait hoping someone in frustration will sell one at a low price. I want one as a curiosity and because I have some boxes of cartridges, but no pens?

#5 Custom Pen Parts

Custom Pen Parts

    Mint

  • Member - Gold

  • PipPipPipPip
  • 58 posts
  • Location:UK

Posted 08 July 2020 - 18:22

Hi
Always ready for a challenge!
Do you have a drawing or anything which might assist me in your quest for a suitable replacement?

#6 Bytebuster

Bytebuster

    Near Mint

  • Member - Silver

  • PipPipPip
  • 25 posts
  • Location:Living in Belgium and working in The Netherlands; living very close to the border.
  • Flag:

Posted 08 July 2020 - 20:01

Hi
Always ready for a challenge!
Do you have a drawing or anything which might assist me in your quest for a suitable replacement?

If this was meant for me, then only thing I can send is some photos of the pen and the measurements of the pen, cartridge and the rest.



#7 Custom Pen Parts

Custom Pen Parts

    Mint

  • Member - Gold

  • PipPipPipPip
  • 58 posts
  • Location:UK

Posted 10 July 2020 - 21:47

I think that idea is great, you never know I or somebody else might come across a refill for you and any knowledge of what is needed would surely help.
Look forward to seeing the photos.

#8 Bytebuster

Bytebuster

    Near Mint

  • Member - Silver

  • PipPipPip
  • 25 posts
  • Location:Living in Belgium and working in The Netherlands; living very close to the border.
  • Flag:

Posted 26 July 2020 - 20:16

This is what I've made very quickly. If there is more information needed, then let me know.

The total length of the metal chamber is 63MM. Inside the camber where the cartridge is placed 51,50MM. As you can see in the photo that there is a space between the cartridge and the ink chamber which is 4,60MM

Attached Images

  • Cartridge.png

Edited by Bytebuster, 26 July 2020 - 20:20.


#9 Lizzard

Lizzard

    Near Mint

  • Member - Gold

  • PipPipPip
  • 45 posts
  • Location:Atlanta GA
  • Flag:

Posted 19 August 2020 - 19:12

This is what I've made very quickly. If there is more information needed, then let me know.

The total length of the metal chamber is 63MM. Inside the camber where the cartridge is placed 51,50MM. As you can see in the photo that there is a space between the cartridge and the ink chamber which is 4,60MM

I also purchased a Vendome (used) and have received it. I have cleaned it to ensure I am not complaining about OLD ink residue.

I filled the one proprietary cartridge that came in the pen with KWZ Azure Blue #5.  While I can insert it through the cartridge holder into the pen, the ink does not flow consistently through the nib and feed. It writes a few words with very light ink, then it stops flowing, then resumes.

 

I disassembled as much as I could, cleaned everything again thoroughly and came here to look for answers.

 

I am also on the hunt for cartridges for this interesting pen.

 

Thanks,

Liz


Don't let someone who gave up on their dreams talk you out of yours.
- Unknown -

#10 sanphoemo

sanphoemo

    Mint

  • Member - Gold

  • PipPipPipPip
  • 88 posts
  • Flag:

Posted 19 August 2020 - 19:40

Well, the space is normal. My Cartier pen takes the same cartridges. You can still get them in Cartier shops "Boutiques". My husband gave me a Cartier set for present and bought the cartridges in a Cartier shop.
34742086fq.jpg

Edited by sanphoemo, 19 August 2020 - 19:40.






Also tagged with one or more of these keywords: cartier, vendome, cartridge



Sponsored Content




|