Jump to content

Writers Edition Regrind


jebib111

Recommended Posts

I have a Fitzgerald with a M nib. I would like it reground to EF. I am being told this is a no go because it will make the platinum flake off. Any comments? And if feasible who actually could do it? Any advice appreciated.

Link to comment
Share on other sites

  • Replies 15
  • Created
  • Last Reply

Top Posters In This Topic

  • Michael R.

    2

  • jebib111

    2

  • zaddick

    2

  • GOTO10

    2

I received similar feedback to my regrind request for a Homer WE marked F but wrote like an M. I'm inclined to go with the experience of the nibmeister I sent the pen to.

Link to comment
Share on other sites

If they are good nibmeisters they will all give you the same answer. The rhodium plating will have to be taken off and you will have an ugly rhodium plated nib with gold tip. What's more important is that the the plating might continue to flak off with cleaning and just nib handling with filling and cleaning the nib. That might make it super ugly.
The only way is to pay for a nib exchange with MB themselves.

Link to comment
Share on other sites

Thank you, I am also respectfully asking if you would know if the Writer's nibs are either 146 or 149 in size? I was considering just swapping out the nib wit a MB nib and storing the WE nib.

Link to comment
Share on other sites

I'm still new to MB's but I *think* most WE's are based on the 146 and only the Hemingway and Homer are based on the 149?

Link to comment
Share on other sites

Before grinding an M to EF, compare the tines of factory/stock M and EF nibs side-by-side.

Edited by FredRydr
Link to comment
Share on other sites

All WE nibs are #6 size except Hemingway, Dumas, and Homer. Plenty of plated nibs are ground without issue and I have had it done. If you have concern you can ask the nib grinder to focus on the tipping to remove as little of the plating as possible. Some people are more meticulous than others.

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

Plating can be polished away during this process but I never experienced flaking of.

 

Flaking of has been reported on black nibs (ruthenium plated) or rose gold plated nibs but not on rhodium plated ones.

 

Good luck

 

Michael

Link to comment
Share on other sites

My Exupery 2017 WE has been regrind without problems, no flaking or yellow gold spots. It was a medium nib turned into a cursive italic.

The nibmeister has to be very careful when grinding and use tape when polishing.

 

If it´s a standard nib size you want, I would contact Montblanc to get a prize for a nib exchange.

Link to comment
Share on other sites

My Dumas was a medium and Mike Masuyama brought it down to a fine with no issues.

PAKMAN

minibanner.gif                                    Vanness-world-final.png.c1b120b90855ce70a8fd70dd342ebc00.png

                         My Favorite Pen Restorer                                             My Favorite Pen Store

                                                                                                                                Vanness Pens - Selling Online!

 

Link to comment
Share on other sites

Pakman,

 

That's interesting. I wrote directly to Mike Masuyama about regrinding the nib on my 149/90th and he replied that, with a plated nib such as that one, regrinding would...well, I'll quote his own words:

 

 

"Unfortunately, I have a problem working on the Montblanc 90th anniversary "rose gold plated" 18kt gold nib. For some unknown reason (to me), the 90th anniversary "rose gold" plating is extremely weak.
If I touch any of that rose gold plated part with my grinding wheel, or even with a steel hand tool, rose gold plating start to flake off in large pieces. I've learned this hard way. And the worst thing is that the rose gold plating is covering almost 2/3 of the tipping material, too. It is impossible to grind the tip into a stub or anything without touching the rose gold plated area.
There is no issue with rose gold plating on other nibs from other brands, such as Aurora, Sailor, Delta, Omas, even TWSBI's rose gold plated steel nib. Only the Montblanc rose gold plating is giving this problem.
I am very sorry, but I can not touch the 90th anniversary nib on your Montblanc."
Link to comment
Share on other sites

  • 1 month later...

So, grinding a Hemingway medium down to a fine is not a good idea? How about grinding from medium to oblique medium?

Link to comment
Share on other sites

So, grinding a Hemingway medium down to a fine is not a good idea? How about grinding from medium to oblique medium?

The Hemi uses the stock 149 nib from the same era. If ever there were a nib in the WE series easy to replace it would be that one. Grind it how you like it.

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Announcements


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33583
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26772
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...