Jump to content

Us Nibmeister Needed For A Mb 149


shawnee

Recommended Posts

Hi all,

 

Righto.

 

I bought a second hand 149 as you do. It's probably late '80s and likely has been sitting in a drawer for the last decade or so with dried out ink in the nib, feed, and inside the reservoir as they do.

 

I've been flushing like a mad fool and am still getting ink coming out, which is depressing, but my bigger issue is the nib. (See photos)

 

I think I need a US-based nibmeister. I don't want to send the pen off to MB because I don't want them to replace the nib - I simply want it repair it and maybe have it tuned. I've only ever used MB service for a nib exchange on a new pen, nothing vintage. The thing is I haven't even tried to ink it because I'm still trying to clean it out. So, I guess where I need advice is the following:

 

1) Anyone want to recommend a nibmeister based in the US? I've seen a couple of names when I went searching, but some of the posts mentioning names were quite old.

2) Do I try to ink it anyhow and see what the line looks like?

3) Commercial pen flush or no? Or send it off to a nibmeister who might take pity on me?

 

Whatever happens, I don't want to screw up this pen, but I feel like I might've been overconfident in my abilities to clean it . . . as you do. LOL.

 

Sigh.

Shawnee

 

 

post-121617-0-23980700-1548185099_thumb.jpg

post-121617-0-30764000-1548185107_thumb.jpg

post-121617-0-19108500-1548185115_thumb.jpg

post-121617-0-44038700-1548185129_thumb.jpg

post-121617-0-37879600-1548185136_thumb.jpg

post-121617-0-98583800-1548185142_thumb.jpg

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

  • shawnee

    15

  • CS388

    2

  • zaddick

    2

  • SpecTP

    2

Top Posters In This Topic

Posted Images

If you want, i can take it apart for you, clean it, and ship it back to you, no cost... i'd just be happy to see the pen back to life.

 

For tuning, although i know how to and i do it to my pens, i wouldnt ever touch some one else's pen...

 

If you want to deal with a nib meister, then i have tried 2 in the past: Dan smith (thenibsmith.com) and Mike M (mikeitwork.com)

As for my experience, mike usually has a HUGE backlog... his work is great and can do amazing things to nibs... but i dont like waiting so much.
Dan has been AMAZING in all regards with all the pens i have sent in. I would blidnly recommend him to anyone who wishes to get any nibwork.

Link to comment
Share on other sites

If you want, i can take it apart for you, clean it, and ship it back to you, no cost... i'd just be happy to see the pen back to life.

 

For tuning, although i know how to and i do it to my pens, i wouldnt ever touch some one else's pen...

 

If you want to deal with a nib meister, then i have tried 2 in the past: Dan smith (thenibsmith.com) and Mike M (mikeitwork.com)

As for my experience, mike usually has a HUGE backlog... his work is great and can do amazing things to nibs... but i dont like waiting so much.

Dan has been AMAZING in all regards with all the pens i have sent in. I would blidnly recommend him to anyone who wishes to get any nibwork.

 

 

Thank you for such a quick response. Do you think I should try to ink it and test it just to see?

 

I appreciate the offer on cleaning it. If I can't get in with a nibmeister in a relatively decent time, I might take you up on that!

 

shawnee

Link to comment
Share on other sites

Yes! Try it out.

It will not hurt it to dip the nib in some ink and then write with it.

Then, you might even fill it and see how/if it works. Why not?

The gap looks a bit wide, but you'll find out soon enough.

 

Good luck!

Link to comment
Share on other sites

Water flushing should do the trick. I would ink it and see if I could live with how it writes. As far as a nib person, I had Mike Masuyama (Mike-it-Work) adjust my 149 and get it writting like I wanted it to.

PAKMAN

minibanner.gif                                    Vanness-world-final.png.c1b120b90855ce70a8fd70dd342ebc00.png

                         My Favorite Pen Restorer                                             My Favorite Pen Store

                                                                                                                                Vanness Pens - Selling Online!

 

Link to comment
Share on other sites

That nib probably needs a little bit of tine alignment....

 

MAYBE a shimmy or two between the front tines, but 149 nibs, (especially from that era), are really easy to adjust, and it can be done without any tools...

 

If ya need help, lemme know, and I'll be glad to provide you with some!

:)

 

Good Luck!

Link to comment
Share on other sites

Ink and go....and tell us

The tine spread looks like it may have been adjusted wide for a wetter writer. That may not be a bad thing. The two 80's MB's I have a a tiny wee bit dry.

It may take a couple of inkings to dislodge old and dried out ink but be patient and it will come.

Link to comment
Share on other sites

Thank you, everyone. I've been bogged down in the Dating the 149 post for the last two hours after posting my initial post. Sweet sweet Jesus. Is it normal to become addicted to these charts? Not only do I now feel completely neurotic about my pen, but I'm also trawling around like a shark looking for another 149 WHEN I HAVEN'T EVEN USED THE ONE I'VE GOT.

 

Is this normal? Someone please tell me this feeling goes away, otherwise, I'm in trouble . . . .

 

shawnee

Link to comment
Share on other sites

As far as a nib person, I had Mike Masuyama (Mike-it-Work) adjust my 149 and get it writting like I wanted it to.

 

+1 Excellent “nibmeister” ! I can only recommend him.

Link to comment
Share on other sites

Okay, I'm going to ink it. *deep breath* I'm going to flush it just a bit more to see if I can get the remaining ink out (if my hand doesn't fall off first) then try a bit of ink tomorrow and see what it does. I will post pictures of the whole thing even if it's a debacle. I want to love this pen like it's my child. I just hope it cooperates.

 

shawnee

Link to comment
Share on other sites

One of the reasons I got the MB 149 tool was to be able to remove the nib unit and flush the body of old ink. An ultrasonic cleaner works great to get all the ink out of the nib unit without having to take it apart.

Link to comment
Share on other sites

Okay, I'm going to ink it. *deep breath* I'm going to flush it just a bit more to see if I can get the remaining ink out (if my hand doesn't fall off first) then try a bit of ink tomorrow and see what it does. I will post pictures of the whole thing even if it's a debacle. I want to love this pen like it's my child. I just hope it cooperates.

 

shawnee

 

Okay, ladies and gents . . . what ink do you think I should use for our test? These are your options:

 

Montblanc 'Midnight Blue'

Montblanc 'Black' --> it's actually a vintage, unopened bottle from the mid to late 1980s that I've never opened

Pelikan 4001 'Royal Blue'

Pelikan 4001 'Brilliant Black'

 

 

Thoughts?

Link to comment
Share on other sites

One of the reasons I got the MB 149 tool was to be able to remove the nib unit and flush the body of old ink. An ultrasonic cleaner works great to get all the ink out of the nib unit without having to take it apart.

 

Can I ask how the ultrasonic cleaner works? Do you remove the cap and fully extend the piston out as if it's full of ink? Do you use distilled water (like an autoclave)? Feel free to point me in the direction of a better post if I'm being dense. I have seen people talking about buying ultrasonic cleaners for FPs that can be taken apart and dropped in, but I have no expertise to take apart any of my MBs. Frankly, that seems absolutely petrifying given their cost.

Link to comment
Share on other sites

Your pen looks early 1990s given the 18K and early plastic feed.

 

It also looks like the times were spread apart and then forced back together. The space between the times from the breather hole to the tip should be parallel or narrow to the tip. Yours looks like it gets wider and then the tip was pinched back together. There might be flow issues or maybe not.

 

I'd keep cleaning it. Have you let it soak in water completely covering rhe mid and feed (so nib to the bottom of the cup with an inch or so of water)? You can also wrap a paper towel around the wet nib and feed up against where they enter the pen to draw some old ink out. I say more free work at home before paying money to have someone clean your pen.

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

Your pen looks early 1990s given the 18K and early plastic feed.

 

It also looks like the times were spread apart and then forced back together. The space between the times from the breather hole to the tip should be parallel or narrow to the tip. Yours looks like it gets wider and then the tip was pinched back together. There might be flow issues or maybe not.

 

I'd keep cleaning it. Have you let it soak in water completely covering rhe mid and feed (so nib to the bottom of the cup with an inch or so of water)? You can also wrap a paper towel around the wet nib and feed up against where they enter the pen to draw some old ink out. I say more free work at home before paying money to have someone clean your pen.

 

 

Yep. I'm going with 1990-94 given the fact that it's an 18K gold nib with an early plastic feed, a two-part barrel body, and a brass piston (which I didn't take a picture of).

 

I'm a little concerned about the nib, I can't deny. I'm going to probably send it off, but will definitely ink at least once before I do.

 

What do you think the nib size is? I'm leaning toward a basic 'M'.

 

shawnee

Link to comment
Share on other sites

Sorry, I didn't mention the flushing. I've only used boiled, tepid tap water (I need to get some distilled). I have drawn up water at least a dozen times now and let it sit for a couple of hours and then have drained it. I have also flushed the piston about 10-15X times in a row probably 2-3x now although I'm loathe to do that in case I put too much wear and tear on the piston. I have used NO Dawn or ammonia yet because I'd rather try to flush it naturally, which may be absurd, I will concede that. This is the first vintage that I've purchased that came encrusted with ink. The 146 I got by accident was pretty clean so not a lot of issue there. My other 146 and 145 I've had since new. The 144 I have coming will be a surprise . . .

Link to comment
Share on other sites

Yes, it looks like M.

 

Have you left the feed submerged in water as I suggested? I usually fill the pen and then it soak in water.up over the edge of the collar. Ink particles are heavier and will flow out if dissolved. I usually just do the soak first, right when I get the pen.

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

 

What do you think the nib size is? I'm leaning toward a basic 'M'.

 

I think I'd be heading more to the F side? These can be very characterful nibs!

 

Sweet pen! I see the aforementioned 'issue' with the tines - but, I'd definitely ink it up and try it, before sending it out for help. You never know, it may turn out to be a real winner.

 

Good luck.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Announcements


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...