Jump to content

Help With Sheaffer Admiral Touchdown


Ruth Feiertag

Recommended Posts

Apologies if my question has already been answered. I did a search and didn't find what I want to know.

 

I have the Sheaffer pictured (I hope) below. I've used it a couple times without problems, but now the filler mechanism has become almost impossible to move. I looked up a couple videos on servicing touchdowns, but none were quite like the one I have with the window. The barrel of others in the videos seemed to unscrew from the feed section easily; mine won't budge and before I try to persuade it further, I thought I'd ask here if anyone knows whether the section and barrel are supposed to come apart on these models. If not, do I merely need to lubricate the metal tube of the mechanism to get it to move again? What questions should I be asking?

 

Thanks in advance for any advice anyone has to offer.

 

Ruth

 

post-123860-0-14872100-1534310665_thumb.jpgpost-123860-0-82421700-1534310674_thumb.jpg

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Ruth Feiertag

    3

  • Ron Z

    2

  • Misfit

    1

  • acornham

    1

Top Posters In This Topic

Posted Images

I can’t help, but farmboy here on FPN got my Sheaffer snorkel resacced. If you don’t get any answers, maybe send him a PM.

Posted Image
Link to comment
Share on other sites

Thanks, Misfit. I got a DM with a promising lead from another member, but if that doesn't pan out, I'll contact Farmboy. Even though my pen's a little different, it's good to know Farmboy's familiar with the brand. I gather Touchdowns are easier to deal with than Snorkels, so anyone who can service a Snorkel is worth keeping in mind!

 

Ruth

Link to comment
Share on other sites

I usually apply a thin coat of silicon grease to the plunger on my touchdowns and snorkels. I would give that a try before I tried to remove the section. If that doesn't sort it out, then I suppose it would be a good time to look at installing a new o-ring. That would require removal of the section. Always a little scary if they don't come apart easily.

Link to comment
Share on other sites

This is a Sheaffer Statesman AKA a "fat touchdown), one is on my website as I write this.

 

Repairs are fairly straight forward. The section unscrews, the sac guard should pull off. The sac if hardened, usually stays in the sac guard, so you'll have to get it out, which is usually the hard part. The remains of the old sac have to be removed from the sac nipple, and a fresh one installed and secured with shellac. Use either a 17 or 17 1/2 sac. While its apart clean and flush the nib unit. Don't take that apart unless you have to.

 

The barrels have an 0-ring at the end that should be replaced. The pen may not fill if it isn't, and even if it is functional I always replace them because the pen fills better when you do. They take the same 0-ring as the PFM, i.e. the larger of the two 0-rings that Sheaffer used in touchdown and snorkel pens. David Nishimura sells them. Remove the screw at the inside end of the TD tube, remove the blind cap, push the TD tube out of the barrel, and you'll see the 0-ring inside. Reverse order for assembly. Put a little silicone grease on the TD tube before reinserting in the barrel.

 

Though evidence from NOS barrels I have suggests that Sheaffer used white lithium grease to lubricate the tubes, I think that silicone is better and safer.

spacer.png
Visit Main Street Pens
A full service pen shop providing professional, thoughtful vintage pen repair...

Please use email, not a PM for repair and pen purchase inquiries.

Link to comment
Share on other sites

I usually apply a thin coat of silicon grease to the plunger on my touchdowns and snorkels. I would give that a try before I tried to remove the section. If that doesn't sort it out, then I suppose it would be a good time to look at installing a new o-ring. That would require removal of the section. Always a little scary if they don't come apart easily.

 

 

Dear Wags and Ron,

 

Thank you both for getting back to me. I'm not going to attempt removing the section myself. It won't unscrew, even with a fair bit of force, so I think I'm going to send the pen away for repairs rather than risk breaking it (which I've done before, though fortunately only on old junker pens that I got for the purpose of learning what I can and can't do). Usually I'd be more adventurous, but this pen just writes so smoothly that I don't want to mess it up.

 

Wags, the problem has gotten worse. I now can't get the tube to budge enough to apply the grease. I would have to apply more force there too than I am comfortable using.

 

If I could get the section to come off, Ron, I'd happily use your instructions, the clarity of which is exemplary. I'm liking the challenge of learning to do low-level restorations. Maybe I'll try to find another Touchdown whose section will come off nicely just to practice taking it apart and putting it back together.

 

Thanks again, both of you.

Link to comment
Share on other sites

Sheaffer used thread sealant on the section threads. You need to warm the barrel to soften the thread sealant.

spacer.png
Visit Main Street Pens
A full service pen shop providing professional, thoughtful vintage pen repair...

Please use email, not a PM for repair and pen purchase inquiries.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...