Jump to content

Inky T O D - Making Inks Drier - Dryer - Drying Additives?


BrassRatt

Recommended Posts

There are recent topics on additives to make ink "wetter", more flowing, such as detergent or PhotoFlo (or maybe other things).

 

Are there additives that give the opposite effect? --that make ink "dryer", slow the flow, retard absorption into paper, make a nib write a narrower line?

 

Thank you for describing them if so, or for clearly stating that no such thing is known to Ink Fandom if not.

 

 

Link to comment
Share on other sites

  • Replies 23
  • Created
  • Last Reply

Top Posters In This Topic

  • ParkerDuofold

    8

  • BrassRatt

    4

  • amberleadavis

    3

  • Chrissy

    2

Hello BrassRat, et al,

 

Add a little distilled water... keep adding a little until you're satisfied.

 

Water has a very high surface tension; which is why ink company's add surfactant(s) to ink in the first place. ;)

 

Not only will the water add to the surface tension; it will also dilute the over abundant surfactant(s).

 

 

- Anthony

 

P.S.: DO NOT ADD OVER 10% water because then you can dilute the mold inhibitors past their useful capacity.

 

 

EDITED to add text.

Edited by ParkerDuofold
Link to comment
Share on other sites

This topic always ends with distilled water.

 

Seems like the ingredient(s) shall remain a secret.

 

Water dilutes. But if water is the ONLY additive known to anyone here, I feel very discouraged.

Link to comment
Share on other sites

This topic always ends with distilled water.

 

Seems like the ingredient(s) shall remain a secret.

 

Water dilutes. But if water is the ONLY additive known to anyone here, I feel very discouraged.

 

Inks are usually designed with ingredients that make them wetter rather than dryer, so water is one thing we can come up with to make them dryer. :)

Link to comment
Share on other sites

 

Inks are usually designed with ingredients that make them wetter rather than dryer, so water is one thing we can come up with to make them dryer. :)

Very much so. Ink is 99.9+% water, with minimal dyes and other proprietary additives added. If you really want to see dry, just run some water through pen, with maybe some slight bit of ink so you can see the line, and see how that feels. That would give you a clear idea how dry your pen runs inherently. Then you'd know if you need to either switch inks or find a nibmeister to try and tame the flow.

Link to comment
Share on other sites

This topic always ends with distilled water.

 

Seems like the ingredient(s) shall remain a secret.

 

Water dilutes. But if water is the ONLY additive known to anyone here, I feel very discouraged.

Hello Minddance,

 

Ironically, it is water that makes inks dry. (Ink is around 95% water). The reason some inks are "dryer" than others is simply because they have less surfactant(s) in them... for one reason or another.

 

Sometimes it's the manufacturer's choice; other times it's more specic, such as a certain dye group can only handle a certain level of surfactant before it begins to break down, so less must be used, etc., etc.

 

Ink companies do not add chemicals to make their inks dryer... the high water content combined with water's high surface tension takes care of that.

 

This is why the answer given is always water... because the answer always is water. ;)

 

 

- Anthony

Link to comment
Share on other sites

...Ink is 99.9+% water...

Hi Inkling13,

 

Actually, I think the average is even higher than that. :rolleyes:

 

 

- Anthony ;)

Link to comment
Share on other sites

Hello Minddance,

 

Ironically, it is water that makes inks dry. (Ink is around 95% water). The reason some inks are "dryer" than others is simply because they have less surfactant(s) in them... for one reason or another.

 

Sometimes it's the manufacturer's choice; other times it's more specic, such as a certain dye group can only handle a certain level of surfactant before it begins to break down, so less must be used, etc., etc.

 

Ink companies do not add chemicals to make their inks dryer... the high water content combined with water's high surface tension takes care of that.

 

This is why the answer given is always water... because the answer always is water. ;)

 

 

- Anthony

Dear ParkerDuofold,

 

Many thanks for addressing my concern. I am aware water does exactly what you expressed. I see no irony in that due to the higher surface tension of water and I have experienced the effect of adding water, my experience mirrors many others' and do not doubt its ability.

 

My concern is if there's anything - at all - besides water that can negate the effects of surfactants such as Kodak Photoflo and slow down ink flow, or make inks thicker without interfering with its colour or saturation (not merely perceived due to slower flow).

 

I am very eager to accept that there's surely something else other than water ;)

Link to comment
Share on other sites

When Adam Voss did a series of tests, I had suggested glycerin to make the ink wetter. In practice, he found that small amounts of glycerin (which is a surfactant and should make the ink wetter) actually made the ink drier.

Fountain pens are my preferred COLOR DELIVERY SYSTEM (in part because crayons melt in Las Vegas).

Create a Ghostly Avatar and I'll send you a letter. Check out some Ink comparisons: The Great PPS Comparison 

Don't know where to start?  Look at the Inky Topics O'day.  Then, see inks sorted by color: Blue Purple Brown Red Green Dark Green Orange Black Pinks Yellows Blue-Blacks Grey/Gray UVInks Turquoise/Teal MURKY

 

 

 

 

 

 

Link to comment
Share on other sites

...I am very eager to accept that there's surely something else other than water ;)

Dear Minddance,

 

I wish I could help you out, but I know of nothing other than water or sand. ;)

 

- Anthony

 

 

P.S.: Ah, it seems Amberlea has an interesting suggestion....

 

 

 

When Adam Voss did a series of tests, I had suggested glycerin to make the ink wetter. In practice, he found that small amounts of glycerin (which is a surfactant and should make the ink wetter) actually made the ink drier.

Hi Amberlea,

 

This is interesting... I tried adding glycerin to make inks feel more lubricated.

 

The ink did feel a little silkier at first, but the flow was dryer. So it was sort of a stalemate. :mellow:

 

 

- Anthony

Link to comment
Share on other sites

glycerin (which is a surfactant...)

 

Are you sure it's a surfactant? I knew that it's a humectant...

fpn_1375035941__postcard_swap.png * * * "Don't neglect to write me several times from different places when you may."
-- John Purdue (1863)

Link to comment
Share on other sites

Are you sure it's a surfactant? I knew that it's a humectant...

You're correct, Tweel. Glycerin is a humectant; whereas surfactants have a detergent composition.

 

 

- Anthony

Link to comment
Share on other sites

Glycerin -- or any liquid that does not evaporate substantially at room temperature -- would be expected to slow or indeed prevent ink from drying on paper, I'd think. A humectant would be expected to magnify this effect by retaining atmospheric water in the ink line. Does experience bear this out?

Link to comment
Share on other sites

This is interesting... I tried adding glycerin to make inks feel more lubricated.

The ink did feel a little silkier at first, but the flow was dryer. So it was sort of a stalemate. :mellow:

- Anthony

 

Sounds like a complete win to me -- dryer flow is what I'm asking about, and silkier feel would be a bonus.

How much glycerin did you add in your experiments (what proportion to original ink)?

So what's the catch? What's the downside?

 

Link to comment
Share on other sites

See, you all are more knowledgeable about those chemistry things. I'm going to add this to the Topic O' Day list.

 

I don't know that there is a downside other than slow dry time.

Fountain pens are my preferred COLOR DELIVERY SYSTEM (in part because crayons melt in Las Vegas).

Create a Ghostly Avatar and I'll send you a letter. Check out some Ink comparisons: The Great PPS Comparison 

Don't know where to start?  Look at the Inky Topics O'day.  Then, see inks sorted by color: Blue Purple Brown Red Green Dark Green Orange Black Pinks Yellows Blue-Blacks Grey/Gray UVInks Turquoise/Teal MURKY

 

 

 

 

 

 

Link to comment
Share on other sites

And if you are interested, the topic has been listed here: https://www.fountainpennetwork.com/forum/topic/282789-start-here-inky-t-o-d-topics-oday/

Fountain pens are my preferred COLOR DELIVERY SYSTEM (in part because crayons melt in Las Vegas).

Create a Ghostly Avatar and I'll send you a letter. Check out some Ink comparisons: The Great PPS Comparison 

Don't know where to start?  Look at the Inky Topics O'day.  Then, see inks sorted by color: Blue Purple Brown Red Green Dark Green Orange Black Pinks Yellows Blue-Blacks Grey/Gray UVInks Turquoise/Teal MURKY

 

 

 

 

 

 

Link to comment
Share on other sites

I don't know about the chemistry of it, but I have always thought of glycerine as a thickener, to slow down the passage of ink through a pen, and detergent as the opposite, to help the ink flow better through the pen.

You would need a balance of the two, depending on how much dye is in the ink, and the particular feed in your pen (some of the new chinese feeds seem to be quite hard to wet).

fpn_1412827311__pg_d_104def64.gif




“Them as can do has to do for them as can’t.


And someone has to speak up for them as has no voices.”


Granny Aching

Link to comment
Share on other sites

This is interesting... I tried adding glycerin to make inks feel more lubricated.

The ink did feel a little silkier at first, but the flow was dryer. So it was sort of a stalemate. :mellow:

 

- Anthony

 

Sounds like a complete win to me -- dryer flow is what I'm asking about, and silkier feel would be a bonus.

How much glycerin did you add in your experiments (what proportion to original ink)?

 

So what's the catch? What's the downside?

 

Hello BrassRat, et al,

 

I started by adding 1 drop of glycerin per 1 oz. of ink... shook the bottle... dip tested it, using a fountain pen and kept adding one drop and shaking until I got the feeling I was looking for, (2 drops in a bottle J. Herbin brown... it's slipping my mind right now, which one).

 

 

The catch... or down side is that if you favor wide medium and broad nibs, (like yours truly); or if you're using stubs, italics and especially Flex nibs, (which all require heavier flow rates), the diminished flow can be problematic.

 

 

If anyone is interested; here's where I got mine:

 

https://www.naturalpigments.com/glycerin.html

 

 

PLEASE NOTE: I bought mine from the same place a while ago, but received a different brand than what is pictured here; if that will make any difference, I cannot say.

 

 

- Anthony

Link to comment
Share on other sites

I don't know about the chemistry of it, but I have always thought of glycerine as a thickener, to slow down the passage of ink through a pen, and detergent as the opposite, to help the ink flow better through the pen.

You would need a balance of the two, depending on how much dye is in the ink, and the particular feed in your pen (some of the new chinese feeds seem to be quite hard to wet).

Yes. :thumbup:

 

However, while glycerin does add viscosity to the ink; it does also aid in lubrication.

 

That's the great thing about also having Kodak FotoFlo 200... if needs be... the secret is finding the right balance between the two.

 

- A.C.

 

 

EDITED to correct typo and add text.

Edited by ParkerDuofold
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...