Jump to content

Fake Or Defective 149?


penwala

Recommended Posts

I just got a nos 149 . When I try to close the cap by twisting - I only have to twist less than 1/4 of a turn before it stops and locks on to the body of the pen.

It seems like the threads on the body and cap are mismatched.

Another one is that there is no serial no.

 

I have to twist my 146 -at least 2 full turns before it locks in.

 

Is this normal??

 

Thank you for your help!!!

Link to comment
Share on other sites

  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • penwala

    2

  • Chrissy

    2

  • zaddick

    2

  • niksch

    1

Top Posters In This Topic

No serial number means the clip is pre 1991. The threads changes around 1984 or so. It is possible you have a cap and a body that are mismatched. The normal capping should be like your 146.

Edited by zaddick

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

...and make sure there's no bits of 'crud' etc, obstrucing the threads. Give them a good clean out.

 

But, intial guess is as above: could be a mismatch?

 

Good luck.

Link to comment
Share on other sites

just look at the thread in the cap and the body and count how many there are.

You count the thread starts, in orlther words look at the bottom of the cap and see how many places the threading starts. You will see either 3 or 4 openings. Now look at the threads on the body closest to the nib. Is it the same number of starts?

If you want less blah, blah, blah and more pictures, follow me on Instagram!

Link to comment
Share on other sites

Oh boy -how much does a new cap cost??

 

What I would do is to go to my friendly boutique and tell them about the problem. They would send it to Montblanc and in all likelihood I would only be charged a level one service price, approximately $80.

 

I you were to send it to your head office in Texas, you might be charged a level one or a level two service. However, it needs to be something that is vital for the pen to work. They won't change it for cosmetic reasons. A mismatched cap with virtually no screw threads fits the bill for you and me, but I hope that Texas think that too. :)

Link to comment
Share on other sites

Not normal, but good local MB repairman could fix this for half of MBs repair price, including return shipping.

Hard times don't last, but hard people do.

 

Thank a Veteran.

 

Link to comment
Share on other sites

I think its a mismatch too, I have two 149s and the caps turn slightly over 1 turn to close

I also have a 90th anniversary 149 but my other 149 caps don't screw on that.

Hope this helps

Mike

Link to comment
Share on other sites

Not normal, but good local MB repairman could fix this for half of MBs repair price, including return shipping.

 

Who can supply a new, correctly fitting cap for this 149 pen for less than $40 inclusive of return shipping?

Link to comment
Share on other sites

Can you please post pictures?

 

And when you say NOS, how old are we actually talking here?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Announcements


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33563
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26750
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...