Jump to content

Pilot Metropolitan


vikalp11

Recommended Posts

Hi everyone.

I would like to share my views on my new and first fountain pen : The Pilot Metropolitan.

 

First impressions at the shop were good. The pen felt solid in hand. It wrote well with no pressure.

I had researched a bit before purchasing this pen. Earlier I wanted to buy the Waterman Hemisphere, but that was out of budget. The pilot metropolitan perfectly fitted in my budget and writing requirements. Hence I purchased it. The shop is Shukla & Co., located at Fort, Mumbai.

 

I have attached pics of the pen, which also have my reviews in them, which I wrote in my diary. Ink used is Pelikan Royal Blue 4001.

Please let me know what you all feel about it.

post-131532-0-26355400-1472069715_thumb.jpeg

post-131532-0-30375400-1472069851_thumb.jpeg

post-131532-0-91925100-1472069890_thumb.jpeg

post-131532-0-73127500-1472069916_thumb.jpeg

post-131532-0-20245500-1472069953_thumb.jpeg

post-131532-0-68992900-1472069975_thumb.jpeg

post-131532-0-29752900-1472070201_thumb.jpeg

post-131532-0-73650400-1472070219_thumb.jpeg

post-131532-0-35286200-1472070242_thumb.jpeg

post-131532-0-10828400-1472070265_thumb.jpeg

post-131532-0-76974600-1472070295_thumb.jpeg

post-131532-0-66329500-1472070341_thumb.jpeg

Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

  • vikalp11

    20

  • senzen

    4

  • tamiya

    4

  • TheRealMikeDr

    3

Top Posters In This Topic

Posted Images

Thanks for the review. I have one Metropolitan and find it good writer as well. And congratulations on your first fountain pen!

Dan

Link to comment
Share on other sites

Thank you Lisadan!

But did you notice the problem that I mentioned in my review? I need to understand why the pen did not start writing at once when used after around 4 hours. I squeezed a drop of ink out of the pen, didn't allow it to drip off the nib, but let the feed to absorb the ink. This trick paid off and the pen is writing good now.

Did you face a similar issue?

Edited by vikalp11
Link to comment
Share on other sites

I don't recall such a problem with my Metropolitan, but it has been a while since I bought it and used it. I do encounter this problem sometimes with other pens. It may have to do with ink drying too fast, or maybe something else. I'm sure other forum members have better knowledge. However; your method of squeezing out a little ink seems to work for me as well. If squeezing is not an option (when using a cartridge), I just wet my finger with saliva and wipe the nib (and then wipe the finger to minimize the ink stain). It usually works, since saliva is a natural dissolver.

Dan

Link to comment
Share on other sites

haha the shopkeeper looks bemused... maybe not too common to get asked for a pic? ;)

 

coincidentally bought the same Metro "Lizard" in SG last month, came in same chunky plastic case.

 

Does your Indian-distributed Metro use a std international cartridge/converter (=Euro spec) or Pilot's own proprietary (=Japanese spec)?

 

My recent Metros were both Std euro spec, came with converter; my older Japanese ones only came with one ink cartridge & I added Pilot CON-20/50 separately. Searched throughout MY & SG and only found their Euro spec Metros to come with M nib only, nothing else.

 

 

btw Pelikan 4001 is a pretty "dry" ink, in some pens it's like screeching your fingernails on blackboard! Suggest try a wetter ink in your Metro... mine prefer Waterman, Pilot both Basic & Iroshizuku, Lamy is good too. Even Parker Quink would be smoother than 4001... not much, but still more enjoyable imho.

Link to comment
Share on other sites

Enjoy your first fountain pen, good choice. I know I'm always impressed with mine.

Link to comment
Share on other sites

Hi Tamiya. Yes, the shopkeeper was a bit embarrassed:).

This is the cartridge that I got with the pen:

post-131532-0-41388100-1472106077_thumb.jpeg

Link to comment
Share on other sites

This is the cartridge that I got with the pen:

attachicon.gifimage.jpeg

that looks like Pilot's CON-20 Converter which is an aeromatic rubber bulb under the stainless steel spring

 

that means you've got the Japanese version of Metro; if you did remove the converter to use ink cartridges, you'll need to buy Pilot's own cartridges

 

Euro Metro with std converter they supply a twisty piston type, it's clear so you can see ink level. It's functional but cheap looking, doesn't look as flash quality as their CON-50 units.

Link to comment
Share on other sites

The con50/40 piston converter with agitator may work better than the con20. I had problems with ink flow using the con20 in my pilot falcon.

Try the cartridge and if you don't get the same problem then you know its the converter.

Edited by max dog
Link to comment
Share on other sites

Thanks for your well thought out and enjoyable review! I like my Metropolitan as well - however I've never had any skipping or hard start issues with it.

 

From my experience (with other pens) - skipping or hard starting can be several things:

1) Issues with the nib - baby's bottom or tines not properly aligned.

2) Issues with the feed alignment - this can lead to not getting enough ink to the nib

3) Paper related - you may have oils or something on the paper from your hand/arm which can cause the pen to skip.

4) Ink related - some inks flow better than others. I believe the Pelikan 4001 ink products are known to be on the dry side (this makes them work well with cheaper papers) so if you continue to get skipping or hard starts I would try another ink in the pen before anything else.

 

All that said you may want to continue to write with the pen for several weeks before doing anything to see if the skipping returns - sometimes a new pen will write better after some ink has flowed through it for a while for whatever reason.

 

Most of all - have fun and enjoy your new writing friend!

Link to comment
Share on other sites

Great review, very useful! That pen case looks good to protect pens while traveling.

"The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt."

 

B. Russell

Link to comment
Share on other sites

Enjoy your first fountain pen, good choice. I know I'm always impressed with mine.

Thank you! Yes, I am enjoying my new pen, albeit with a minor issue...

Link to comment
Share on other sites

that looks like Pilot's CON-20 Converter which is an aeromatic rubber bulb under the stainless steel spring

that means you've got the Japanese version of Metro; if you did remove the converter to use ink cartridges, you'll need to buy Pilot's own cartridges

Euro Metro with std converter they supply a twisty piston type, it's clear so you can see ink level. It's functional but cheap looking, doesn't look as flash quality as their CON-50 units.

Oops, sorry, used the wrong word. You are right, it's a converter. I was watching a few videos of fountain pens and their cartridges & converters and now understood the difference. Edited by vikalp11
Link to comment
Share on other sites

Great review, very useful! That pen case looks good to protect pens while traveling.

Thank you Russell, I am glad you enjoyed it! The case is good, only problem being the cover does not snap tight onto the holder; the cover slides off pretty easily, should have been more tight fit.

Link to comment
Share on other sites

Thank you Dr. Mike, I am glad you enjoyed reading my review of the Pilot FP.

 

Thank you very much for listing the causes for hard start / skipping issues, it's really helpful.

I will try changing the ink. Would Pilot's ink be a good choice? Or please suggest a better alternative.

Edited by vikalp11
Link to comment
Share on other sites

The con50/40 piston converter with agitator may work better than the con20. I had problems with ink flow using the con20 in my pilot falcon.

Try the cartridge and if you don't get the same problem then you know its the converter.

Hi Max, thanks for the information. I will keep this in mind, in case I need to change the converter. I will try switching ink first...
Link to comment
Share on other sites

Thank you Dr. Mike, I am glad you enjoyed reading my review of the Pilot FP.

 

Thank you very much for listing the causes for hard start / skipping issues, it's really helpful.

I will try changing the ink. Would Pilot's ink be a good choice? Or please suggest a better alternative.

 

I've got two Pilot inks and both work great for me in every pen I use them in.

Link to comment
Share on other sites

I've got two Pilot inks and both work great for me in every pen I use them in.

What is the model number? What name is it?

Link to comment
Share on other sites

Thank you! Yes, I am enjoying my new pen, albeit with a minor issue...

 

You might want to try one of those pen flush solutions. Let it dry out and ink it up again. I use one flush with each new pen, rinse, and let dry.

 

Best of luck.

Link to comment
Share on other sites

What is the model number? What name is it?

Pilot's "basic" Ink is plenty good, decent colour strength & flows well.

 

http://thumbnail.image.rakuten.co.jp/@0_mall/menet/cabinet/pilot_pen/ink30.jpg

 

Pilot also makes premium "Iroshizuku" range with lots more unboring colours, they too cannot be faulted except for being 3X the price... but you do get a decently handsome glass bottle!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33474
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26573
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...