Jump to content

My First Pelikan - Have Some Questions


dragos.mocanu

Recommended Posts

Hello,

 

Today I've received my first Pelikan, a 100N 'EXPORT' marked, with Pelikan D.R.P. around the cap top, which I got for an absurdly low price on the local flea market. The pen is in fantastic condition for such an old pen, and the nib is a sweet OF or OM with quite a bit of flex. The only thing that bothers me is that the piston seal is not completely flush to the interior of the barrel, and while the pen does fill almost completely, I'm afraid that some liquid can get past the seal into the back of the pen. I've tried to disassemble the piston assembly (I've read about them and I know that I must turn clockwise), but it doesn't budge...I didn't force it.

 

I'm guessing that the pen is made out of resin, but I may be wrong (can't quite tell the difference between celluloid and acrylic).

 

Here are a couple of pictures (sorry for the bad quality):

 

http://i.imgur.com/8DV453g.jpg

http://i.imgur.com/EAzdOgU.jpg

http://i.imgur.com/1ajah2t.jpg

 

Is there any place in Europe where I could get a new seal for the piston? And also, what can I do in order to loosen the piston assembly, so I can remove it? Thank you.

Edited by Murky

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

  • dragos.mocanu

    10

  • sargetalon

    4

  • Bo Bo Olson

    3

  • Erik Dalton

    3

Quite nice catch. There are plenty places, where you can have your piston repaired especially in Germany/Italy (few of members are very good pen doctors) and it's not difficult task for skilled ones. However you may try finding someone in your country due to waitting time and maybe a bit higher costs.

 

Regarding the piston assembly you should use special tool to remove it and be really gentle since it's really easy to damege the barrell while doing it. I wouldn't do it myself - prefer to send the pen to someone who will restore it to original condition, espacially when pen needs only minimal work like one on pictures above :)

Edited by limt
Link to comment
Share on other sites

Thanks for the answer; however, I'd rather repair the pen myself. Would it be safe to soak the piston end of the pen in water, in order to loosen the threads? I'm guessing that the piston assembly is celluloid (it definitely doesn't smell like hard rubber).

 

Update: Ok, so I went on and did the sensible thing to do when celluloid parts are stuck together...I've added a little bit of (very controlled) heat, and with the help of some rubbery gloves I managed to take out the piston assembly..yaaay! The internals look perfect, but now I need a new piston seal...

Edited by Murky

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

Be very careful trying to remove the piston. The only Pelikans that have a piston assembly that is threaded and screws into the pen body is the M 800 and M 1000. The others are all friction fit with little ridges that hold everything in place. You can pull the piston assembly out but you will most certainly damage the fit.

If the pen is not leaking ink out the back end you might consider leaving it alone and enjoy writing with it. If it is leaking then I recomend sending it off to be repaired.

I service all my Montblanc and M-800's and other piston fill pens. I will not mess with other model Pelikans. They are not made to be taken apart.

In order to add silicone grease to lubricate the piston plunger you would unscrew the nib an go in from that end. There is no way to grease the "worm gear" parts of the piston assembly without attacking the back end, and that was not designed to be opened up.

I'm sure there are some pen restorers who would do a good job for you, but I would advise against doing it yourself, but if you do let us know how it all worked out.

Link to comment
Share on other sites

@Old Salt: Those older 100 and 100Ns have threaded piston assemblies that facilitate removal. Backwards threaded. Similar to the modern M800 and M1000. I believe the M101Ns of today are the same.

 

P.S.: Great pen there! Enjoy it.

Edited by sargetalon

PELIKAN - Too many birds in the flock to count. My pen chest has proven to be a most fertile breeding ground.

fpn_1508261203__fpn_logo_300x150.jpg

THE PELIKAN'S PERCH - A growing reference site for all things Pelikan

Link to comment
Share on other sites

Sorry. Learn something every day. Thanks for the heads up.. When did pelikan stop threading the piston mechanism? How do would you know?

Link to comment
Share on other sites

Sorry. Learn something every day. Thanks for the heads up.. When did pelikan stop threading the piston mechanism? How do would you know?

It's just model specific. Stopped in the 50's. Merz & Krell picked it up again in the 70's. Now we have it on the high end Souveräns.

PELIKAN - Too many birds in the flock to count. My pen chest has proven to be a most fertile breeding ground.

fpn_1508261203__fpn_logo_300x150.jpg

THE PELIKAN'S PERCH - A growing reference site for all things Pelikan

Link to comment
Share on other sites

Come to think of it, taking out the piston was relatively easy on this pen (I wonder why they dropped this design)...I'm now waiting for a new piston seal, ordered a couple from David Nishimura...can't wait to write with it, I'll post some new pictures once the restoration is finalized.

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

It's a beautiful pen, I'm glad you are able to bring it back to life, and give us all an opportunity to learn.

Link to comment
Share on other sites

I've noticed something while closely inspecting the pen; inside the barrel (the transparent part that is) there are some small crack-like artifacts...are these some sort of stress cracks? After soaking the section for a couple of hours, with water inside the barrel as well, I could see no droplets on the outside, so probably these fissures won't affect the functionality (or will they?)

 

As I've mentioned before, the pen has been seldom used (judging from the appearance), and I would be glad to hear opinions on this matter. Thanks!

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

Cracks in the ink windows of these older pens are not uncommon. If it doesn't leak, I wouldn't be too concerned. I'm not sure that there is too much to be done about it. If it does start to leak, I know aftermarket replacement barrels can be sourced for the 100. I'm not sure how they look compared to the original or if they are compatible with the 100N. Just keep an eye on them. They may never go any further.

PELIKAN - Too many birds in the flock to count. My pen chest has proven to be a most fertile breeding ground.

fpn_1508261203__fpn_logo_300x150.jpg

THE PELIKAN'S PERCH - A growing reference site for all things Pelikan

Link to comment
Share on other sites

I've got cracks/crazing on the windows of some of my 100Ns. Under magnification, the cracks don't appear to come to the outer surface of the window. Haven't had one leak yet, and I do use them regularly. Just keep an eye on the crack, and avoid tightly squeezing the window which might cause a crack to propagate further. Some of these have many fine crazing cracks and others appear cloudy.

Sun%20Hemmi2.jpg

Link to comment
Share on other sites

There aren't many of these in my ink window (maybe 3-4), and the longest one is about 1cm; the rest are a couple of mm long...The ink window is quite transparent, you'd have to look really closely in order to see the little fissures.

 

I'm really anxious to receive the new piston seal now, I've tried the nib by dipping it in some Pelikan Königsblau, and it writes like a dream

Edited by Murky

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

The seals arrived, I've installed one of them and now the piston is functional :D Gave the nib a small polish with a Sunshine cloth and now it's a permanent EDC, filled with Pelikan Königsblau (which looks really good with this pen, saturated and very well behaved).. here are two more pictures, I know the quality isn't great, but I don't have a proper camera:

 

http://i.imgur.com/mTlTamV.jpg

 

http://i.imgur.com/EIrSKcn.jpg

 

Question: Is there any way to protect the paint on top of the cap (the pelican engraving)? It is in almost perfect condition, and I would hate to rub it off. I'm quite careful with the pens I use daily (especially the vintage ones), and always carry them in a leather case.

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

The seals arrived, I've installed one of them and now the piston is functional :D Gave the nib a small polish with a Sunshine cloth and now it's a permanent EDC, filled with Pelikan Königsblau (which looks really good with this pen, saturated and very well behaved).. here are two more pictures, I know the quality isn't great, but I don't have a proper camera:

 

http://i.imgur.com/mTlTamV.jpg

 

http://i.imgur.com/EIrSKcn.jpg

 

Question: Is there any way to protect the paint on top of the cap (the pelican engraving)? It is in almost perfect condition, and I would hate to rub it off. I'm quite careful with the pens I use daily (especially the vintage ones), and always carry them in a leather case.

 

 

It is a beautiful pen.

 

How about transparent nail polish? never tried but i think it might work :D

Link to comment
Share on other sites

I would just leave it be. Anything applied to the cap top could have unanticipated adverse consequences. If it's not broke, don't fix it.

PELIKAN - Too many birds in the flock to count. My pen chest has proven to be a most fertile breeding ground.

fpn_1508261203__fpn_logo_300x150.jpg

THE PELIKAN'S PERCH - A growing reference site for all things Pelikan

Link to comment
Share on other sites

  • 4 months later...

A few months after restoring this beautiful 100N, I come back with another question. Recently I inked it up and while it held ink alright, I couldn't but notice that ink was getting in between of the two 'disks' which comprise the piston seal (modern replacement seal), and just a little bit, smeared along the barrel, behind the seal. Should I be worried? After emptying the pen, I've noticed that the upper seal 'disk' doesn't quite sit flush to the barrel, while the lower one does.

 

http://i.imgur.com/937ZWWQ.jpg

 

Please let me know what you think.

"The truth may be puzzling. It may take some work to grapple with. It may be counterintuitive. It may contradict deeply held prejudices. It may not be consonant with what we desperately want to be true. But our preferences do not determine what's true..." (Carl Sagan)

Link to comment
Share on other sites

Gorgeous 100N! I've got the fever for one too. I'm also curious about the rubber seal. I've seen a few converted from cork. I'd like to know whether I should focus on a cork one, or if these rubber replacements are top notch.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33501
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26627
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...