Jump to content

1938 Junior Parkette J-Bar Length/size?


boybacon

Recommended Posts

Hello, Everyone.

 

I recently purchased a Parker Parkette based solely on the photos provided on eBuymyjunkplease. It wasn't an expensive pen, and the nib appears to be intact. The pen needs a new sac.....and a new j-bar. The sac size was easy to determine (thank you, FPN!). The J-bar length appears to be a mystery. Looking at some websites, it looks like the J-Bar comes in 62mm, 54mm and 40mm.

 

Any ideas on which one would fit in the Parkette? It's a 1938 Junior model (not Deluxe) in grey celluloid marble. The nib is steel with a little gold plating left and the number "9" stamped in it.

 

--Eric

Link to comment
Share on other sites

  • Replies 9
  • Created
  • Last Reply

Top Posters In This Topic

  • boybacon

    3

  • MickyS

    3

  • pen lady

    2

  • ironwampa

    1

My best guess is it's the 40mm and I have no experience with your particular pen. The 62mm is certainly the wrong one. My suspicion is that the 54mm fits standard size pens rather than the sort of short variety. But my experience is limited.

Note to self: don't try to fix anything without the heat gun handy!

Link to comment
Share on other sites

I like story problems.

 

When I do the math I get 54.

San Francisco International Pen Show - The next “Funnest Pen Show” is on schedule for August 23-24-25, 2024.  Watch the show website for registration details. 
 

My PM box is usually full. Just email me: my last name at the google mail address.

Link to comment
Share on other sites

Thank you both.

 

I'm going to order the long and the midsize. That way, it will motivate me to buy another "needs repair" pen :-) So....what sort of pen would take the 62mm j-bar? What should I start checking eBay for?

Link to comment
Share on other sites

  • 2 years later...

I have searched FPN (and the Net) fairly well and could not find the sac size for a 1939 Parker Parkette Junior, the subject of this older thread. Does anyone have knowledge or experience with a Parkette Junior who could offer that information?

 

Many thanks for the help...

 

Mick

Link to comment
Share on other sites

Hi Mick and welcome to FPN. The purists measure sac size one way, but a "quick and dirty" method is to measure the diameter of the nipple in 64th of an inch. However many you get, that is the sac size. Best of luck.

Link to comment
Share on other sites

Thanks...

 

I tried measuring, but 64ths were pretty tough to discern. I was thinking maybe someone had replaced a sac recently and would remember its size.

Link to comment
Share on other sites

Sacs aren't too expensive. When in doubt, order a range, say #14 #16 and #18. The sac should be a relatively tight fit over the nipple and have enough clearance in the barrel to slide in and out freely. Have you already bought shellac and talc? Edit: Sorry no quotes, just a ham-fisted computer user!!!!!!

 

 

 

 

Edited by pen lady
Link to comment
Share on other sites

Yes, I have the shellac and talc. At $2.00 a sac, I'll get the range and see which delivers the best fit. I was surprised no sac chart I could find mentions the Parkette Junior.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33559
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26744
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...