Jump to content

Rare, Bizarre, Unique Dip Pen Nibs You Have?


TXKat

Recommended Posts

By now I'm sure everyone here thinks I'm off my rocker, but I've yet another obscure, weird product question regarding dip pen nibs.  Ready?

 

Anyone ever heard of a Laundry nib? It says LAUNDRY NIB right on it! Hardest dang thing to write with in the world. Hard as nails and ink will NOT stay on the nib. It was on one of the holders I purchased. The shape is much like a bank nib (which says BANK NIB on it), and quite round, quite large, but...it's just odd! (Not at home, so no pic at the moment.) Wonder if Laundry is a name and it's just a horrible generic nib, lol.

 

There are the usual suspects, the Gillotts, Hunts, Esterbrooks, blah, blah, blah, but what is the most unusual or off the wall nib you have come across and what is it like?The most recent purchase garnered me a Miller Bros. Bank Nib with a pretty key breather hole. It was unusual for me, but I must say the flex is awesome! I also have a nib I'm guessing was made for a group as it is a "Clan" nib.

 

So info on the nib would be good...your oddest, unique nib and why would be a fun addition.

 

...and GO!  :rolleyes:

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

  • Replies 15
  • Created
  • Last Reply

Top Posters In This Topic

  • TXKat

    6

  • ac12

    2

  • Intellidepth

    2

  • Paddler

    1

Top Posters In This Topic

I have one with one shank and 5 small niblets spaced equidistant from each other. It is used for making the five staff lines in musical notation. It does a good job of it, too.

Can a calculator understand a cash register?

Link to comment
Share on other sites

The "finger" nib.

It is actually the index finger, but at first glance you think it is the middle finger.

 

 

BTW, if ink will not stay on the nib, you may just have to clean it. Dip pen nibs are coated with oil or something else, so they don't rust before you get it. I clean my nibs with alcohol, but there are MANY ways of cleaning/preparing a new nib for use.

Edited by ac12

San Francisco Pen Show - August 28-30, 2020 - Redwood City, California

www.SFPenShow.com

Link to comment
Share on other sites

The "finger" nib.

It is actually the index finger, but at first glance you think it is the middle finger.

 

 

BTW, if ink will not stay on the nib, you may just have to clean it. Dip pen nibs are coated with oil or something else, so they don't rust before you get it. I clean my nibs with alcohol, but there are MANY ways of cleaning/preparing a new nib for use.

I cleaned that sucker and no matter what...ink runs right off. Maybe I should wash with "Laundry" detergent?? :lticaptd:

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

 

 

 

I cleaned that sucker and no matter what...ink runs right off. Maybe I should wash with "Laundry" detergent?? :lticaptd:

 

Or carburetor cleaner.

I used carb cleaner on a particularly troublesome nib.

 

A match flame is what some people use, to burn off the coating.

San Francisco Pen Show - August 28-30, 2020 - Redwood City, California

www.SFPenShow.com

Link to comment
Share on other sites

That's a first, but I know where there is some carburetor cleaner! If that doesn't help...maybe Braklean...lol!

 

Still curious what the Laundry nib was for. (A weapon if it doesn't change it's ways.). It's sharp and super hard.

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

My guess is that it was for marking clothes with laundry ink.

It is quite common for institutions with communal laundry services to write the owner's name on each garment so they don't get mixed up.

 

Maybe that is why it is a dip pen?

I bet laundry ink would be something that would clog a fountain pen.

 

Or, it could just be a weird marketing thing from a time that we don't fully understand nowadays.

 

A similar thing happens with straight razors.

They often have unusual names for marketing purposes that us modern folk don't always 'get'. I used to have one called 'The Electric', and never figured out why.

 

I bought a small razor once that had 'The Corn Razor' engraved on the blade.

I assumed that this was just another inexplicable weird marketing name, but it turned out that it was designed for shaving corns (hard skin) off your feet!

Edited by Jamesbeat
Link to comment
Share on other sites

And here are a few more from a lot I received yesterday. If anyone can help me with what these are for...I would really appreciate this!

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

They look industrial don't they, like they belong on a machine.

Noodler's Konrad Acrylics (normal+Da Luz custom flex) ~ Lamy AL-Stars/Vista F/M/1.1 ~ Handmade Barry Roberts Dayacom M ~ Waterman 32 1/2, F semi-flex nib ~ Conklin crescent, EF super-flex ~ Aikin Lambert dip pen EEF super-flex ~ Aikin Lambert dip pen semi-flex M ~ Jinhao X450s ~ Pilot Custom Heritage 912 Posting Nib ~ Sailor 1911 Profit 21k Rhodium F. Favourite inks: Iroshizuku blends, Noodler's CMYK blends.

Link to comment
Share on other sites

And here are a few more from a lot I received yesterday. If anyone can help me with what these are for...I would really appreciate this!

 

They were used for industrial design. They could belong to Pelikan Graphos:

 

https://www.fountainpennetwork.com/forum/index.php/topic/178748-pelikan-graphos-dip-pen-set/

WomenWagePeace

 

SUPORTER OF http://imagizer.imageshack.us/v2/100x75q90/631/uh2SgO.jpg

 

My avatar is a painting by the imense surrealist painter Remedios Varo

Link to comment
Share on other sites

On my last trip to Hungary I picked up these nibs at an antikvariát (old books letters, writing implements old paper, pipes, etc,....). These nibs come from the Schuler Co of Budapest.

It was the cruciform breather holes that caught my eyes.

*Sailor 1911S, Black/gold, 14k. 0.8 mm. stub(JM) *1911S blue "Colours", 14k. H-B "M" BLS (PB)

*2 Sailor 1911S Burgundy/gold: 14k. 0.6 mm. "round-nosed" CI (MM) & 14k. 1.1 mm. CI (JM)

*Sailor Pro-Gear Slim Spec. Ed. "Fire",14k. (factory) "H-B"

*Kaweco SPECIAL FP: 14k. "B",-0.6 mm BLS & 14k."M" 0.4 mm. BLS (PB)

*Kaweco Stainless Steel Lilliput, 14k. "M" -0.7 mm.BLS, (PB)

 

 

 

Link to comment
Share on other sites

On my last trip to Hungary I picked up these nibs at an antikvariát (old books letters, writing implements old paper, pipes, etc,....). These nibs come from the Schuler Co of Budapest.

It was the cruciform breather holes that caught my eyes.attachicon.gifcruciform breather 2-1.jpg

Those are beautiful....

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

Thanks for pointing me in that direction, FountainPagan. Never heard of the thing until now. I'm wondering if the tin hat looking things are for drafting as well. Not sure if they would go on the same handle and they were in a separate box of nibs with pen needles. ??!!!

So, what's your point?

(Mine is a flexible F.)

Link to comment
Share on other sites

I'm wondering if the tin hat looking things are for drafting as well. Not sure if they would go on the same handle and they were in a separate box of nibs with pen needles. ??!!!

 

Yes, they're for drafting. They work like a technical pen, except that you dropper ink into them through the cut-out in the side. Yours might have screwed into a handle for use as a ruling pen, but I have a feeling that they actually were meant to go with something like a lettering set. Whatever they went into would have separately held the needle that goes through the tip.

 

The nibs in the other box in the photo do look like they're from a Pelikan Graphos set.

 

Your laundry-marking nib probably isn't holding your ink because the laundry-marking ink was more viscous. Have you tried India ink?

fpn_1375035941__postcard_swap.png * * * "Don't neglect to write me several times from different places when you may."
-- John Purdue (1863)

Link to comment
Share on other sites

These may not be rare, bizarre, or unique, but they are a bit mysterious.

Some years ago I visited a stationery shop in a mall in Helsinki. The shop had some wooden dip pen holders plus a little bowl of nibs. Two caught my eye: they appeared to be finished in copper. Looking more closely, I saw they were stamped "GOVT. OF PAKISTAN".

 

pakistan-nibs.jpg


The clerk couldn't tell me how they ended up in Finland, but they didn't cost much.

Link to comment
Share on other sites

They were used for industrial design. They could belong to Pelikan Graphos

Fascinating. I can easily imagine my inventor grandfather using these now I've seen them attached to their nib holder and section. Too bad all his things were cleared when he passed away when I was younger. I would have particularly liked to have kept his drafted drawings, models, and instruments. I have a great memory of him working at his tilted drafting table in the 3/4 height space under his house in tropical Australia.

Noodler's Konrad Acrylics (normal+Da Luz custom flex) ~ Lamy AL-Stars/Vista F/M/1.1 ~ Handmade Barry Roberts Dayacom M ~ Waterman 32 1/2, F semi-flex nib ~ Conklin crescent, EF super-flex ~ Aikin Lambert dip pen EEF super-flex ~ Aikin Lambert dip pen semi-flex M ~ Jinhao X450s ~ Pilot Custom Heritage 912 Posting Nib ~ Sailor 1911 Profit 21k Rhodium F. Favourite inks: Iroshizuku blends, Noodler's CMYK blends.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33501
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26627
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...