Jump to content

Flamed Cane: Darkening Up The True Bamboo


drgoretex

Recommended Posts

After posting my 'True Bamboo' pen recently, I had a number of people requesting a darker version. So, here by request is darker version of the pen, using another bamboo fly fishing rod making technique...

http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8591_zps247748f5.jpg?t=1378259684

In the last two posts, I mentioned the thread-wrap technique commonly used in fly fishing rod construction (especially bamboo 'cane' rods), here I used another technique used in their production. 'Flaming' is a process used to carmelize and lightly char the outside of a bamboo culm before it is split into strips and planed to size to make a fly fishing rod. It gives the bamboo a nice, darkened appearance, and a bit of colour texture. Here I have used that technique on a small culm that I wanted to use for a pen. After flaming the culm, I took off the outer layers with a bit of steel wool, then sealed the pen inside and out with a good soak of low viscosity CA.

http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8595_zps6a7b8141.jpg?t=1378259686
http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8602_zps7cec803b.jpg?t=1378259688

As I think I mentioned in my last post, for the thread wraps on blonde, or pale cane, spring green is a popular choice, while on flamed cane one often sees darker colours such as the garnet thread I have used here.

http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8618_zps3e0729fd.jpg?t=1378259694

The end jewels on my last Bamboo pen were a bit too prominent for my taste, so on this pen I decided to make them simple, flat, and out of ruby flake acrylic to match the thread wraps - and am reasonably pleased with the result. The nib section, as well as the threaded parts of the cap and barrel, I made from black acrylic.

http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8609_zpsb6a8e67a.jpg?t=1378259692

Here is a group shot of the last three bamboo pens that I made - the flamed cane, the blonde cane, and the pen made of bamboo 'wood':

http://i221.photobucket.com/albums/dd231/kcavers/Custom%20Pens/Custom%20Fountain%20Pens/Designer%20Fountain%20Pens/IMG_8622_zps46748c87.jpg?t=1378259701

Thanks for looking - comments and critique welcome.

Ken

 

Link to comment
Share on other sites

  • Replies 23
  • Created
  • Last Reply

Top Posters In This Topic

  • drgoretex

    4

  • rudyhou

    1

  • Kess

    1

  • Inspector

    1

I think the 'flamed' bamboo version is much nicer than the lighter versions, and wonder what a section of a matching color to the winding thread would look like? The end jewels are also much nicer IMO.

Link to comment
Share on other sites

Exquisite! To my tastes, the 'flamed' version is even more beautiful than the 'blonde' (and I really like that one, too!). The burgundy gives it a very classy finish. Absolutely stunning!! :wub: Thanks for sharing.

Link to comment
Share on other sites

Ken, this is my favorite so far - great work!!!

Currently using:Too many pens inked to list, I must cut back! :) I can guarantee there are flighters, urushi, and/or Sheaffer Vac-fillers in the mix!!!

Link to comment
Share on other sites

It is really something different to see the workmanship without the marketing hype... Great work and keep the ideas coming.

Link to comment
Share on other sites

Flaming gives the material a very rich patina, and garnet thread complements it perfectly. If you could find a color match for the garnet thread, I think I'd go that way with section and end jewels.

 

Been a while since I've stopped in at this forum. Been missing some good stuff! Well done Ken! (as always).

Link to comment
Share on other sites

Really wonderful work!

 

Is there a possibility of providing a pocket clip?

 

Thanks! I don't think I will likely try to make a clipped pen - at least not with the True Bamboo. Perhaps the one made from a bamboo blank....

 

Flaming gives the material a very rich patina, and garnet thread complements it perfectly. If you could find a color match for the garnet thread, I think I'd go that way with section and end jewels.

 

Been a while since I've stopped in at this forum. Been missing some good stuff! Well done Ken! (as always).

 

Thanks, Robert! I might give the matching acrylic components a go in the future...

 

Cheers,

 

Ken

Link to comment
Share on other sites

You are always an inspiration Ken.

 

With respect to a clip. I understand your reluctance but if a clip were fashioned to look a bit like one of the loops / rings the fishing line goes through. Can you tell I don't fish? That clip wrapped to the pen would be in keeping with the bamboo, and I think look the part.

 

Pete

 

PS. I just took a look at fly rod parts to see what the "loops" were called, fly guides and tops, and saw that the hook keepers looked a lot like a pen clip. Perhaps some SS wire bent along those lines would work?

Edited by Inspector
Link to comment
Share on other sites

You are always an inspiration Ken.

 

With respect to a clip. I understand your reluctance but if a clip were fashioned to look a bit like one of the loops / rings the fishing line goes through. Can you tell I don't fish? That clip wrapped to the pen would be in keeping with the bamboo, and I think look the part.

 

Pete

 

PS. I just took a look at fly rod parts to see what the "loops" were called, fly guides and tops, and saw that the hook keepers looked a lot like a pen clip. Perhaps some SS wire bent along those lines would work?

 

Thanks very much, Pete!

 

I don't think I will add anything to these 'True Bamboo' pens, but to my taste, your thoughts about using something 'fishing rod-like' is right on the mark for the pen I recently made out of a bamboo blank (OK, cutting board...), and in fact, I have been on the lookout for some appropriate wire (may need to hit the hobby store) that I can fashion into a clip. Ideally, it would be somewhat similar to the Lamy Safari wire clips, only narrower, and secured to the end of the cap by another thread wrap, as it would be on a fly fishing rod.

 

Appreciate the thoughts!

 

Cheers,

 

Ken

Link to comment
Share on other sites

the darker version definitely looks much better than the rest. then again, i'm bias. i like dark-colored woods.

-rudy-

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...