Jump to content

Wality 71jt Flex


watch_art

Recommended Posts

so after fiddling with my wality a while, trying to make it perfect for me, and succeeding only a little bit, i decided to go all out and fiddle with it to the fullest extent of fiddledom.

i took out the old nib and traced it against a hunt 44 dip nib, cut the nib down so it would fit over the feed, cut the feed up so the nib would fit down a little bit better, heated and set and heated and reset (x5 or 6) until i got decent contact between the feed and the nib. i started out with about 1 or 2 mm between the tip of the feed and the nib. not too good.

 

since it wasn't the perfect pen to begin with (it did write nice when it wrote)(and i did feel like fiddling) i didn't feel bad for 'modding' it.

 

now it's a bit more fun to write with. it's still a dry starter, but once started it writes nice and smooth and wet. and flexy.

 

http://farm5.static.flickr.com/4010/4650335777_d0df11028b.jpg

 

http://farm5.static.flickr.com/4070/4650335859_321b740da3.jpg

 

http://farm5.static.flickr.com/4013/4650953152_e8d422c707.jpg

 

http://farm5.static.flickr.com/4039/4650336341_28750d0eec_b.jpg

Link to comment
Share on other sites

  • Replies 9
  • Created
  • Last Reply

Top Posters In This Topic

  • watch_art

    6

  • ZeissIkon

    2

  • Rabbit

    1

  • Scribblesoften

    1

Top Posters In This Topic

What I see as the big problem here is that your Hunt 44 nib isn't stainless, it's carbon steel -- and as such, though it's surely much more flexible than the original Wality nib, it'll rust, probably within (at most) a few months (if the tip doesn't wear down too much to use before then -- I have both problems with the dip pens I use most). Then, because you've modified the feed, you won't be able to simply reinstall the original nib (though I understand Wality pens can accept feeds from some Sheaffer pens, at least giving you an option to replace the feed when the Hunt nib rusts out, quite probably correcting the hard starting when you do so).

Does not always write loving messages.

Does not always foot up columns correctly.

Does not always sign big checks.

Link to comment
Share on other sites

yeah i thought about the wear and rust today. not too worried about it. so i can replace it with a sheaffer feed you say???

reeeaaaally. nice.

so where can i get a sheaffer feed/nib to stab in there? that's going to be the next move then.

 

thanks for the comments.

Link to comment
Share on other sites

HA! i took the nib/feed from my hobby lobby bought sheaffer nn F italic pen and stabbed it into the wality. perfect fit! and it writes SO NICE! and the nib won't rust.

 

thanks ZeissIkon!!!

Link to comment
Share on other sites

HA! i took the nib/feed from my hobby lobby bought sheaffer nn F italic pen and stabbed it into the wality. perfect fit! and it writes SO NICE! and the nib won't rust.

 

thanks ZeissIkon!!!

 

Heh. There you go. Of course, the original nib (as I understand it, Wality uses vintage gold nibs in their pens) should also fit with the Sheaffer feed, and with a more precisely made feed than the hand cut ebonite number original to the Wality, will probably write as well as the Sheaffer nib, if not better, as well as looking nicer.

Does not always write loving messages.

Does not always foot up columns correctly.

Does not always sign big checks.

Link to comment
Share on other sites

i don't know if the wality nib is vintage, but it's certainly not gold. it's gold something plated steel. i like the italic sheaffer nib well enough to leave it as is.

Link to comment
Share on other sites

actually, i don't like the I nib. that's why when i bought my Lamy back in February I quit using the Sheaffer Italic pen. I should put it back together. I took apart another sheaffer I have and put in a fine nib from the old cart pen. Very nice. I think I'll leave it this way for sure.

Link to comment
Share on other sites

What I see as the big problem here is that your Hunt 44 nib isn't stainless, it's carbon steel -- and as such, though it's surely much more flexible than the original Wality nib, it'll rust, probably within (at most) a few months (if the tip doesn't wear down too much to use before then ....

 

Actually, I tried this once before too (using a Parker Sonnet feed--easy to take in and out) and it actually rusted within a few days. I knew it probably wouldn't last long, but I was shocked at how quickly it happened.

 

--Stephen

Link to comment
Share on other sites

yeah, there was actually quite a bit of nastiness under the nib when i took it out. it's already in the trash. besides, i'm MUCH happier with the sheaffer f 304 nib in there now.

Link to comment
Share on other sites

  • 2 years later...

The Wality looks like a direct copy of the Sheaffer nibs fitted to the cartridge "school" and the No Nonsense pens. Right down to the little ears on the tail end. Very nice nibs.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33583
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26772
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...