QUOTE (Tom Pike @ Aug 6 2008, 03:52 AM)

Hi DerMann,
The easiest way, if you're comfortable with trying it, is to gently lift one tine over the other and slightly cross them. Then, lift the other tine over the first one and slightly cross them again. This will bring them closer together. Just be careful of the tipping when you're doing this. All should be well and the gap should close right up. If you get them too tight, the ink flow will be too light, so make tiny adjustments.
Cheers,
Tom
There was a bit in an article that I remember which said if you squeeze the wings of the nib, the tines will cross. I've tried this with little to no success. How long should I keep the tines crossed? I think it would be easier with a stiffer nib :\
QUOTE (richardandtracy @ Aug 6 2008, 03:58 AM)

Could look here:
http://www.nibs.com/ArticleIndex.html might show what you want.
Regards
Richard.
I think that was one of the sites that I came across. Not quite sure if it is it, though. Thanks for the link, though.
Upon much closer inspection, the right tine is bent away from the point in the last millimeter before the actual iridium. I can't imagine that I could bend it back without damaging the nib. I'll try and get pictures a bit later.