For sale are some used Parker 61 parts (from left to right):

1. Gold filled Parker 61 cap (1/10 12ct RG) "made in Enlgand"; plastic insert of jewel missing, shows minor signs of use but no dents or dings >>> 10 Euros
2. Gold filled Parker 61 cap (1/10 12ct RG) "made in Enlgand"; shows minor signs of use and two very small dings near the clip and some brassing on top of round part of the clip surrounding the jewel >>> 10 Euros
3. black barrel with gold trim; some surface wear and scratches at the end of the barrel and one hairline crack (does not reach barrel opening) >>> 5 Euros
4. black barrel with gold trim; some surface wear >>> 10 Euros
5. black barrel with silver trim; almost no surface wear >>> 15 Euros

...or best offer.

Thank you for looking


Michael

bump...

Are the barrels for the capillary filler or the C/C version? I'm in need of a C/C version, and a capillary but in Rage red.

Peter

Hi Peter,

Many thanks for your interest.

I only have black barrels (both silver or gold trim).

I think most came from capillary fillers but I need to check. Do they differ from the c/c version?

Cheers

Michael

Micheal:

The C/C version has a 16 threads per inch triple start thread, so there are three threads starting 120 degrees apart. These look like a very fine thread, although they are the same pitch as the capillary version which has a single lead 16 tpi thread. This one appears fairly coarse, at least 1.5mm between the threads in the barrel.

I can use either one, actually.

Peter