My first go around with CS has been difficult. Out of the box it would dry up within a paragraph or two so it was sent to CS for repair.
It is back now and although improved, still not writing as I would like.
I really don't want to send it back to CS again and I don't want to pay for a tune up but I am interested to hear if anyone has found a particular ink has improved the flow of their 100.
The nib is a .9 by the way and I have already tried Namiki blue, Noodle's Eel black, Diamine Indigo and Waterman Florida Blue.
All of the above should be perfect for a dry writer but I am hoping someone has found something better for their 100.
Thanks for any suggestions.
Full Version: CS 100
Hi,
Interesting to see your post. I just purchased a new Model 100 from Richard Binder and was quite surprised to encounter the exact same problem. This pen came from CS, via RB, with a broad nib and then Richard reground to an italic. The pen, if dipped, would write just fine until the "inventory" of ink on the feed was consumed, then it went dry. I tried a variety of simple things... pumping ink out of the pen via the converter to make sure the internal feed channels were wet and running. then tried soaking and flush with water and some dilute ammonia..still not working right. If the pen was filled, I could get ink to bleed into a tissue held against the upper side (eg top) of the nib, but only toward the back end of the nib. The slit either was not carrying the ink down the nib point properly or the feed was improperly adjusted for flow from the factory. Quite disappointing I must say. Once the pen returns from L'hopital Binder, I'll let you know what inks are working. To date, I tried Waterman B/B, Sailor Jentle B/B, Diamine Indigo and Noodlers B/B.. .None would flow...which leads me to express my frustration with CS quality control.
Interesting to see your post. I just purchased a new Model 100 from Richard Binder and was quite surprised to encounter the exact same problem. This pen came from CS, via RB, with a broad nib and then Richard reground to an italic. The pen, if dipped, would write just fine until the "inventory" of ink on the feed was consumed, then it went dry. I tried a variety of simple things... pumping ink out of the pen via the converter to make sure the internal feed channels were wet and running. then tried soaking and flush with water and some dilute ammonia..still not working right. If the pen was filled, I could get ink to bleed into a tissue held against the upper side (eg top) of the nib, but only toward the back end of the nib. The slit either was not carrying the ink down the nib point properly or the feed was improperly adjusted for flow from the factory. Quite disappointing I must say. Once the pen returns from L'hopital Binder, I'll let you know what inks are working. To date, I tried Waterman B/B, Sailor Jentle B/B, Diamine Indigo and Noodlers B/B.. .None would flow...which leads me to express my frustration with CS quality control.
When the pen turns out good, it may be perfect, but when it presents such issues... it may be a headache. Taking in mind that CS 100's are beautiful pens, a wreid feed or nib adjustment or converter should not draw you back. I learned the hard way to tune my nibs and feds and now I can enjoy my CS's... I would send it back to CS or to Richard, explaining very well the problem. I had luck, but I would not reccomend modifying the adjustments as I did, unless you are well familiar with what you are doing.
I gave up on it after its trip to CS did not fix the skipping problem. The seller was kind enough to provide a complete refund. No more CS for me but obviously there are many who are happy with the brand.
QUOTE (mecarboy @ Jul 20 2008, 10:10 PM) 
Hi,
Interesting to see your post. I just purchased a new Model 100 from Richard Binder and was quite surprised to encounter the exact same problem. This pen came from CS, via RB, with a broad nib and then Richard reground to an italic. The pen, if dipped, would write just fine until the "inventory" of ink on the feed was consumed, then it went dry. I tried a variety of simple things... pumping ink out of the pen via the converter to make sure the internal feed channels were wet and running. then tried soaking and flush with water and some dilute ammonia..still not working right. If the pen was filled, I could get ink to bleed into a tissue held against the upper side (eg top) of the nib, but only toward the back end of the nib. The slit either was not carrying the ink down the nib point properly or the feed was improperly adjusted for flow from the factory. Quite disappointing I must say. Once the pen returns from L'hopital Binder, I'll let you know what inks are working. To date, I tried Waterman B/B, Sailor Jentle B/B, Diamine Indigo and Noodlers B/B.. .None would flow...which leads me to express my frustration with CS quality control.
Interesting to see your post. I just purchased a new Model 100 from Richard Binder and was quite surprised to encounter the exact same problem. This pen came from CS, via RB, with a broad nib and then Richard reground to an italic. The pen, if dipped, would write just fine until the "inventory" of ink on the feed was consumed, then it went dry. I tried a variety of simple things... pumping ink out of the pen via the converter to make sure the internal feed channels were wet and running. then tried soaking and flush with water and some dilute ammonia..still not working right. If the pen was filled, I could get ink to bleed into a tissue held against the upper side (eg top) of the nib, but only toward the back end of the nib. The slit either was not carrying the ink down the nib point properly or the feed was improperly adjusted for flow from the factory. Quite disappointing I must say. Once the pen returns from L'hopital Binder, I'll let you know what inks are working. To date, I tried Waterman B/B, Sailor Jentle B/B, Diamine Indigo and Noodlers B/B.. .None would flow...which leads me to express my frustration with CS quality control.
I had exactly the same problem with my CS100. I sent it to Richard Binder to fix & now it's okay. But it was a disappointment!
Bock strikes again! I'm sorry to hear about your problems. I've also had numerous frustrating issues with Bock nibs, irrespective of the brand. These include everything from poorly-cut feeds to baby-bottom issues. I wish we as buyers would start taking Bock to task, and not just the pen companies who let bad nibs slip through.
Best,
David
Best,
David
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.