Jump to content

First Try At Polishing A Section


Freshink

Recommended Posts

I purchased a "lot" of pens from ebay, some keepers, and some junk.

 

This section had a nasty gouge right around the center...I wonder who used a pair of pliers to try and disassemble their poor pen...

http://i107.photobucket.com/albums/m317/iamkingarthur/photo12.jpg

 

I went after it with some abrasive cloths. Started with about 200 grit, and finished up with 12,000 grit. I'll get after it with some polishing compound later, but it looks pretty darn good now.

http://i107.photobucket.com/albums/m317/iamkingarthur/photo22.jpg

 

 

Link to comment
Share on other sites

  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • OcalaFlGuy

    3

  • Veltri

    2

  • Hobiwan

    1

  • Freshink

    1

Nice work! :thumbup:

Best Regards
Paul


“Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”
– Albert Einstein

Link to comment
Share on other sites

I feel your pain.

 

I just finished polishing the oxidization off an old SJ HR section. What a FPIA!

 

I will say though, there's no more better tool to get in where the section lip is than the edge of a human finger.

 

Plus it's a dang fail, no fail test. It's either not brown anymore or it still is.

 

Bruce in Ocala, Fl.

Edited by OcalaFlGuy
Link to comment
Share on other sites

  • 1 month later...

That's great!

 

I sanded one down today that had pliers teeth and it got rid of most of the issue, but the section almost completely lost its luster.

 

Were you able to bring it back to its original shine?

Link to comment
Share on other sites

Were you able to bring it back to its original shine?

 

Yes.

 

I know a little about polishing.

 

Bruce in Ocala, Fl

Link to comment
Share on other sites

I have written Bruce's polishing regime into the little notebook that goes everywhere with me. It's that good.

 

Your notebook is that big?!

 

Anyway, nice repair job OP.

 

Glenn

Link to comment
Share on other sites

If you don't want to use something like Simichrome (which is hard to find in Canada unless you go on-line) try a nail buffing product such as Revlon's Crazy Shine pad. I think Shoppers Drug Mart sells them. One side is coloured and it's a bit more abrasive then the white side which polishes, well, like crazy. Good luck.

Link to comment
Share on other sites

A decade ago, a very famous pen restorer used heat to "pop out" the pliers marks on the section of a very hard to find Wahl Eversharp of mine. Worked like a charm! I'm sure he polished the result a little bit, but the section didn't get measurably reduced in diameter, and the marks were completely gone!

- - - Jim

Collector of Autopoint + Realite + Realpoint, and Esterbrook accumulator

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33583
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26772
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...