Jump to content

Best Paper For Fountain Pens


Parker Pen 27

Recommended Posts

Hi all,

I just thought that it would be interesting for everyone to know about what I've found to be the best papers for writing with fountain pens. The best brand that I've found is TOPS. Particularly GOLD 20lb. paper. The benefit of these is the thickness and density of the paper. The high levels of both of these allow for incredibley smooth writing across the surface.

 

Parker Pen 27

Link to comment
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

  • Saintpaulia

    7

  • lapis

    4

  • Parker Pen 27

    4

  • stefanv

    3

20lb paper is pretty much the standard weight for office paper, so I doubt that the thickness or density of this particular paper is what makes it good for fountain pens. It's more likely to be the paper's finish that's doing it for you.

Stefan Vorkoetter

Visit my collection of fountain pen articles at StefanV.com.

 

A pen from my collection:

spacer.png

Link to comment
Share on other sites

I prefer a minimum of 90g, because it shades better.

100g-110-120 are good too.

Laser over combo or Ink Jet.

 

But I've gone heavier 150-170g.

 

I have regular copier paper for my copier and scribbling paper for my fountain pens. I want good paper for two toned shading inks.

 

If all you want to use is vivid mono-tone inks you can get by with regular office or even Ink Jet paper.....which I do not use, because it sucks up ink very fast, which would ruin the shading.

In reference to P. T. Barnum; to advise for free is foolish, ........busybodies are ill liked by both factions.

 

 

The cheapest lessons are from those who learned expensive lessons. Ignorance is best for learning expensive lessons.

 

 

 

Link to comment
Share on other sites

20lb paper is pretty much the standard weight for office paper, so I doubt that the thickness or density of this particular paper is what makes it good for fountain pens. It's more likely to be the paper's finish that's doing it for you.

Oh! Thanks, now I know what to look for even more specifically!

Link to comment
Share on other sites

20lb paper is pretty much the standard weight for office paper, so I doubt that the thickness or density of this particular paper is what makes it good for fountain pens. It's more likely to be the paper's finish that's doing it for you.

Oh! Thanks, now I know what to look for even more specifically!

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

Link to comment
Share on other sites

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

 

I don't think there's a relation per se, just two different methods for measuring paper density. The 20 lb is typically used in countries that have local North American paper sizes as the custom. The figure denotes the weight of a standard ream of 500 sheets. The latter is indeed metric and is generally used where-ever the ISO A Series paper sizes prevails.

http://img525.imageshack.us/img525/606/letterji9.png
Link to comment
Share on other sites

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

I've been using the conversion chart on this page. For example, a 24 lb paper is about the same weight as a 90 gsm paper.

Link to comment
Share on other sites

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

 

I don't think there's a relation per se, just two different methods for measuring paper density. The 20 lb is typically used in countries that have local North American paper sizes as the custom. The figure denotes the weight of a standard ream of 500 sheets. The latter is indeed metric and is generally used where-ever the ISO A Series paper sizes prevails.

 

Except a standard ream of 500 sheets of 8.5x11 20lb office paper doesn't weigh 20lb. It is the weight of a stack of 500 sheets of paper at its "basic size", that being the large sheets that are cut down to make the sizes we use. Problem is, the "basic size" varies with the kind of paper, so for instance, an 8.5x11" sheet of 20lb office paper is not the same weight as a same-sized sheet of 20lb card stock.

 

The metric paper weight method is more consistent. It is simply the weight of 1 square metre of the paper in question (i.e. the weight of an A0 sheet), regardless of what kind of paper it is.

 

For office paper, you can convert from lb to g by multiplying by 3.75. So, 20lb paper is equivalent to 75g paper.

Edited by stefanv

Stefan Vorkoetter

Visit my collection of fountain pen articles at StefanV.com.

 

A pen from my collection:

spacer.png

Link to comment
Share on other sites

Except a standard ream of 500 sheets of 8.5x11 20lb office paper doesn't weigh 20lb. It is the weight of a stack of 500 sheets of paper at its "basic size", that being the large sheets that are cut down to make the sizes we use. Problem is, the "basic size" varies with the kind of paper, so for instance, an 8.5x11" sheet of 20lb office paper is not the same weight as a same-sized sheet of 20lb card stock.

 

The metric paper weight method is more consistent. It is simply the weight of 1 square metre of the paper in question (i.e. the weight of an A0 sheet), regardless of what kind of paper it is.

 

For office paper, you can convert from lb to g by multiplying by 3.75. So, 20lb paper is equivalent to 75g paper.

 

See, that just proves how oblivious I am. :P I've rarely ever dealt with non-ISO paper sizes/densities, but I'm steadily becoming more familiar with them via exposure from FPN. That conversion rule is also really nifty, thanks!

http://img525.imageshack.us/img525/606/letterji9.png
Link to comment
Share on other sites

pounds 20= 75 g

" 22= 80 g

" 24= 90 g

" 27= 100G

" 28= 105g

" 29= 110g

" 32= 120G

" 60= 163g...I lucked out and found some 150 g and some 170g paper. I liked it a lot...so now consider 120 G as 'medium weight'. :rolleyes:

 

I don't even look at any thing under 90g.

 

If you are into only vivid highly saturated inks, you could perhaps use Ink Jet.

I don't see how a combo Laser and Ink Jet can perform well as Laser, if you like shading in it has to be able to suck up Ink Jet.

I'd am not an expert on that.

 

I do buy laser only if I can't find typewriting paper... ;) right and hens teeth are easier to find. so I use Laser.

 

I have paper for my printer....thin 80g stuff, and 'real' paper for scribbling.

 

I'm sure some one will jump on me for lumping 80g Rhoda with other 80g papers, but it's got good sizing.

 

Once all paper had good sizing, even the cheap stuff...back when folks typed back in the BC. Before Computers or Before Color (TV).

In reference to P. T. Barnum; to advise for free is foolish, ........busybodies are ill liked by both factions.

 

 

The cheapest lessons are from those who learned expensive lessons. Ignorance is best for learning expensive lessons.

 

 

 

Link to comment
Share on other sites

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

I've been using the conversion chart on this page. For example, a 24 lb paper is about the same weight as a 90 gsm paper.

Thanks Essensia, that was just what I was looking for.

Link to comment
Share on other sites

I assume there is some equivalency between characterizing a paper as 20 lb. and describing it as 90g/m2.

One appears English old-style and the other metric. How do they relate to each other?

 

I don't think there's a relation per se, just two different methods for measuring paper density. The 20 lb is typically used in countries that have local North American paper sizes as the custom. The figure denotes the weight of a standard ream of 500 sheets. The latter is indeed metric and is generally used where-ever the ISO A Series paper sizes prevails.

 

Except a standard ream of 500 sheets of 8.5x11 20lb office paper doesn't weigh 20lb. It is the weight of a stack of 500 sheets of paper at its "basic size", that being the large sheets that are cut down to make the sizes we use. Problem is, the "basic size" varies with the kind of paper, so for instance, an 8.5x11" sheet of 20lb office paper is not the same weight as a same-sized sheet of 20lb card stock.

 

The metric paper weight method is more consistent. It is simply the weight of 1 square metre of the paper in question (i.e. the weight of an A0 sheet), regardless of what kind of paper it is.

 

For office paper, you can convert from lb to g by multiplying by 3.75. So, 20lb paper is equivalent to 75g paper.

Cool Pilot. Thanks!

Link to comment
Share on other sites

Hi all,

I just thought that it would be interesting for everyone to know about what I've found to be the best papers for writing with fountain pens. The best brand that I've found is TOPS. Particularly GOLD 20lb. paper. The benefit of these is the thickness and density of the paper. The high levels of both of these allow for incredibley smooth writing across the surface.

 

Parker Pen 27

Hi everybody again, I believe I made a mistake with clarity... The paper I'm referring to is lined paper, so it's texture is more lustrous than regular office paper...

Edited by Parker Pen 27
Link to comment
Share on other sites

Thanks for that info. I've seen that chart before but could not make heads or tails out of it because I am not familiar with the words at the top of the chart, i.e.:

Bond Text Cover Bristol Index

 

Let's say that I found a notebook that says it has 80 lb. paper in it and that the notebook is 8.5" x 11" in dimensions. How do I use that chart to figure out grams/meter-squared?

Link to comment
Share on other sites

This journal paper says it is 80 lb. Would that translate, via the multiply by 3.75 rule into 300 g/sm?

http://shopping.netsuite.com/s.nl/c.ACCT107430/sc.23/category.6757/.f

I hope the link works.

Breck

 

No, because it's a different kind of paper than office paper. The 3.75 rule applies only to "Bond" paper. The journal paper is probably "Offset" paper, for which the multiplier is about 1.48. So the 80lb paper would probably be about 120g.

 

Let's say that I found a notebook that says it has 80 lb. paper in it and that the notebook is 8.5" x 11" in dimensions. How do I use that chart to figure out grams/meter-squared?

 

You need to know what sort of paper it is. If it's a notebook, it's probably bond, ledger, etc. If it's a sketchbook, it's probably offset, book, etc. Then look in the appropriate column of the conversion table.

Edited by stefanv

Stefan Vorkoetter

Visit my collection of fountain pen articles at StefanV.com.

 

A pen from my collection:

spacer.png

Link to comment
Share on other sites

Stefan, I'll have to read up on the differences betw. Bond and Ledger, etc. By the way I have enjoyed immensely your write up remarks on your collection. We have similiar taste, treating an inexpensive pen with the same deference shown to your more expensive ones. Loved your Targas, which is on my "If I ever get enough money" List.

Link to comment
Share on other sites

  • 4 weeks later...

Hi all,

After some more experimentation...In my opinion, the 20 lbs. paper works very well with inky, medium tip fountain pens. However, when using a fine tipped variety, the Docket Tops 16 lbs. paper works the best. Very smooth...

Thanks!

Link to comment
Share on other sites

I've been searching for a long time for the perfect FP paper. Weight is one factor, but I've determined that just as important is texture and absorbancy. I think that a very smooth texture, and low absorbancy is key. Personal taste, I know, but that's what works best for me.

 

I've used 100g paper that was more absorbent, and experienced moderate bleed-through and echo, where some 80g paper is less absorbent and performs better, in my opinion. For my journal, I absolutely can't have any bleed-through if I'm going to use both sides of the pages.

 

Based on this criteria, my journal of choice is the Clairefontaine Basic Clothbound A4. The 90g paper is a complete joy to write on: smooth and silky, with no feathering, bleed-through, and very little echo. Because the paper is less absorbent, you get nice shading with most inks. I am a big Clairefontaine fan. When they start making the Basic Clothbound with dot-grid paper, I'll be in paper heaven.

 

Clairefontaine Basic Clothbound A4

Edited by EKE

Learning from the past does not mean living in the past.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33494
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26624
    5. jar
      jar
      26101
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...