Jump to content

Visconti Opera Repairs And Cleaning


Npbill

Recommended Posts

I have two Visconti Opera pens, both of which are great writers. I have a question to pose on each. Photos are attached.

 

(1) One of the pens has a translucent barrel and cap with a beautiful swirled pattern. Unfortunately, the inside of the cap has become stained by ink. There is an inner plastic sleeve into which the nib fits when the pen is closed and ink has been drawn by capillary action into the space between this inner sleeve and the cap, probably when the pen has been dropped or jostled. The inner sleeve fits very snugly against the inside of the cap so there is no way of swabbing out the ink without disassembling the cap. I have tried soaking the cap in plain water for an extended period but it didn't have any effect. I have not tried doing this with ammonia or other cleaners. I suspect the only way to solve this problem is by taking the cap apart but I see no obvious way of doing this. Does anyone know how to disassemble this cap, or have other suggestions as to how the staining could be removed?

 

post-75011-0-93432900-1315060745.jpg

 

(2) On the other pen, the squared-off chrome fitting at the end of the barrel is slightly loose. When I post the cap and then remove it, I usually find that this fitting has rotated and is out of alignment with the barrel. Does anyone know how to tight this fitting?

 

post-75011-0-86879600-1315060763.jpg

 

Any help with these problems would be appreciated.

 

Npbill

North Potomac, MD

Link to comment
Share on other sites

  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

  • StrawberryJam

    2

  • Philgood

    2

  • Alice L

    1

  • Npbill

    1

Top Posters In This Topic

Posted Images

So glad you asked! I've also been unsuccessful in removing ink from an Opera cap. Hopefully someone can help both of us.

Link to comment
Share on other sites

I have an Opera Club so I'm not sure if the cap is of the same construction. Mine has (had) a metal band halfway up the cap that trapped ink. I've removed it and don't miss it.

 

As to ink stains, you might try Amodex and a lot of patience. The Amodex has worked to get most of the ink out of mine.

Royce O'Rourke - Realtor! is now available in

PRINT

Link to comment
Share on other sites

  • 1 year later...

I have two Visconti Opera pens, both of which are great writers. I have a question to pose on each. Photos are attached.

 

(2) On the other pen, the squared-off chrome fitting at the end of the barrel is slightly loose. When I post the cap and then remove it, I usually find that this fitting has rotated and is out of alignment with the barrel. Does anyone know how to tight this fitting?

 

attachicon.gifLoose fitting.JPG

 

Any help with these problems would be appreciated.

 

Npbill

North Potomac, MD

 

I know this is an old thread, but I'm having the same issue as the original poster with respect to the back chrome piece on my Opera. I've been told (and can see) there is a little screw on the back that needs to be tightened, but I can't figure out what kind of screwdriver to use. Looks like some sort of socket screwdriver is needed?

Current Wishlist:

Visconti, Visconti, and...more Visconti! (And some ST Duponts too). (Ok fine, getting on the Omas and Montblanc trains now too. Toot toot.) (And maybe on the Montegrappa one too, but only for the Miyas.)

Link to comment
Share on other sites

For reference, the screw looks like this (sorry for the blurry picture, but it was the best I could do):

http://i.imgur.com/niUSpdy.jpg

Current Wishlist:

Visconti, Visconti, and...more Visconti! (And some ST Duponts too). (Ok fine, getting on the Omas and Montblanc trains now too. Toot toot.) (And maybe on the Montegrappa one too, but only for the Miyas.)

Link to comment
Share on other sites

  • 1 year later...

Hello all,

 

I have also a probleme with my opera Chrystal : there is water inside the cap (see photo below)

 

Does anyone know how to disassemble this cap please ?

 

tumblr_nfpr76SUuV1r8mxkro2_1280.jpg

Memento Mori

Link to comment
Share on other sites

For reference, the screw looks like this (sorry for the blurry picture, but it was the best I could do):

http://i.imgur.com/niUSpdy.jpg

Good picture even if it is a bit blurry !

 

I was betting that there was a screw way up inside there and in my opinion that is what is needed to unscrew to start the process , that just may let the inner cap come out. You may also contact someone at the Fountain Pen Hospital and ask them your question? But I think we are on the right track here?

Link to comment
Share on other sites

  • 6 years later...
On 9/4/2011 at 1:36 PM, pilotheinrich said:

I have an Opera Club so I'm not sure if the cap is of the same construction. Mine has (had) a metal band halfway up the cap that trapped ink. I've removed it and don't miss it.

 

As to ink stains, you might try Amodex and a lot of patience. The Amodex has worked to get most of the ink out of mine.

how to remove that metal band? will you be able to align the facets after the removal? thanks>

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33583
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26772
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...