Jump to content

Something from my shop today


OldGriz

Recommended Posts

I decided to take a break from practicing for the handwriting contest after 4 pages today....

Since there was some discussion of the size and weight of the pens that pen turners make... I decided to show what one of the large pens looks like...

This is a Chechen Burl pen I made today ... it is a lot larger than the ones shown in the other thread, but surprisingly it is a lighter pen. There is not as much metal in the kit of this pen... the black is plastic which lightens the pen considerably. This pen is not made to post. It is long enough for even my ham handed fist to write with unposted.

I recently found out that the nibs that we have been lead to believe are German made steel nibs, are in fact not German made.... they are made in China at the Shanghai plant there. Even though they are not true German nibs, they are very smooth nice writing nibs. Unfortunately, we can only get them in medium and they are a true medium, not an Oriental medium.

Well with that all out of the way... here are the measurements;

5.375" Capped

4.875" Open, unposted

0.625" Cap Diameter

0.531" Body diameter

0.375" Narrowest part of section

37g Weight

The nib is 0.875 long and 0.375"wide, a nice big nib that looks great on this size pen.

Edited by OldGriz
Link to comment
Share on other sites

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

  • OldGriz

    6

  • KendallJ

    3

  • Leigh R

    2

  • kissing

    2

Beautiful pen, Griz!

"But God demonstrates His own love toward us, in that while we were still sinners, Christ died for us." (Rom. 5:8, NKJV)
Link to comment
Share on other sites

umm...im unfamiliar with this topic. Can someone fill me in?

 

You MADE that pen :o ?

 

[edit] i had a look at your homepage

 

You're amazing :drool:

 

We have created pens from the floor boards of the old gym at a school and  from an old cherry tree that grew on the family farm before it was sold.  If you have a special piece of wood that holds sentimental value  email us to discuss that special writing instrument.
Edited by kissing
Link to comment
Share on other sites

I agree. Gorgeous. You have Hephaestus' skill (God of Craft) and Aphrodite's eye (Goddess of Beauty.) They were married, you know. :)

Link to comment
Share on other sites

Oh my! Burl and silver!!! :drool: :drool:

 

Gorgeous work, Tom!

A hot wind was blowing around my head, the strands of my hair lifting and swirling in it, like ink spilled in water. ~ Margaret Atwood, The Blind Assassin

Link to comment
Share on other sites

Thanks for taking the time to show us more of your work, always pleasing!

 

-Bruce

Link to comment
Share on other sites

beautiful...

Like Sparky I have to ask...Price?

OK, I feel funny putting the price here, since I did not post that pen as an advertisement... Really, I didn't...

A pen like that would sell for $75.

And it weighs 39 g, which is surprisingly light when you consider the Dragon pen, which is smaller in size, weighs 37 g in wood and a bit more in the alternative stone like the jade used on the dragon.

 

BTW, I am curious. As pen addicts, do you think that is a fair price for a pen like that. It is so hard for me to put a price on my work. :blush: :blush:

 

Of course if I listen to my daughter, the price would be a lot higher, but let's face it she has an agenda... if they don't sell she thinks she gets to keep them... :blink:

Edited by OldGriz
Link to comment
Share on other sites

Oh, that's beautiful. How do you give wood a sheen like that?

 

(Wishing there were an applauding smiley)

 

:)

To get a shine like that on the wood, it is sanded to 12000 grit, wiping down the blank between each grit with denatured alcohol.

Then I use 4 coats of a plexiglass solution that I have been working with if I want to finish the pen the same day. When that finish is totally dry, it is hand polished with automotive polishing compound and then automotive antiswirl cream.

I also offer a hand rubbed nitrocellulose lacquer finish, at extra cost, that takes 8 days to do. That finish consists of 5-7 coats of hand rubbed lacquer.

I am currently playing with a water based lacquer finish that looks and wears as good as the nitrocellulose lacquer I am now using, it takes just as long, but it is a lot better for my health due to lack of solvent fumes. I am not ready to release that one for sale yet, as my wear experiments are not complete yet.

Link to comment
Share on other sites

Perhaps if you do choose to sell this (or a similar) pen, it would be posted in the Marketplace Forum.

Edited by Glenn-SC
Link to comment
Share on other sites

Perhaps if you do choose to sell this (or a similar) pen, it would be posted in the Marketplace Forum.

Glenn,

This pen was not posted here with the intention of selling it.

It was posted because someone asked about the size of turned pens and I responded to that post then added this one because it was a different size and I wanted to show the difference.

I purposely did not post the price of the pen until I was asked twice.

IF, I decide to sell this pen or any of my pens, be assured, they will go in the Market Place.

Link to comment
Share on other sites

Perhaps if you do choose to sell this (or a similar) pen, it would be posted in the Marketplace Forum.

Glenn,

This pen was not posted here with the intention of selling it.

It was posted because someone asked about the size of turned pens and I responded to that post then added this one because it was a different size and I wanted to show the difference.

I purposely did not post the price of the pen until I was asked twice.

IF, I decide to sell this pen or any of my pens, be assured, they will go in the Market Place.

I made no insinuations.

Just making sure I knew where to look, should I choose to.

Link to comment
Share on other sites

I am currently playing with a water based lacquer finish that looks and wears as good as the nitrocellulose lacquer I am now using, it takes just as long, but it is a lot better for my health due to lack of solvent fumes.

Another wonderful creation Tom! :)

 

Yes, watch out for those lacquers. I worked with them for years and don't think they did me much good. :blink:

How can you tell when you're out of invisible ink?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Most Contributions

    1. amberleadavis
      amberleadavis
      43844
    2. PAKMAN
      PAKMAN
      33583
    3. Ghost Plane
      Ghost Plane
      28220
    4. inkstainedruth
      inkstainedruth
      26772
    5. jar
      jar
      26105
  • Upcoming Events

  • Blog Comments

    • Shanghai Knife Dude
      I have the Sailor Naginata and some fancy blade nibs coming after 2022 by a number of new workshop from China.  With all my respect, IMHO, they are all (bleep) in doing chinese characters.  Go use a bush, or at least a bush pen. 
    • A Smug Dill
      It is the reason why I'm so keen on the idea of a personal library — of pens, nibs, inks, paper products, etc. — and spent so much money, as well as time and effort, to “build” it for myself (because I can't simply remember everything, especially as I'm getting older fast) and my wife, so that we can “know”; and, instead of just disposing of what displeased us, or even just not good enough to be “given the time of day” against competition from >500 other pens and >500 other inks for our at
    • adamselene
      Agreed.  And I think it’s good to be aware of this early on and think about at the point of buying rather than rationalizing a purchase..
    • A Smug Dill
      Alas, one cannot know “good” without some idea of “bad” against which to contrast; and, as one of my former bosses (back when I was in my twenties) used to say, “on the scale of good to bad…”, it's a spectrum, not a dichotomy. Whereas subjectively acceptable (or tolerable) and unacceptable may well be a dichotomy to someone, and finding whether the threshold or cusp between them lies takes experiencing many degrees of less-than-ideal, especially if the decision is somehow influenced by factors o
    • adamselene
      I got my first real fountain pen on my 60th birthday and many hundreds of pens later I’ve often thought of what I should’ve known in the beginning. I have many pens, the majority of which have some objectionable feature. If they are too delicate, or can’t be posted, or they are too precious to face losing , still they are users, but only in very limited environments..  I have a big disliking for pens that have the cap jump into the air and fly off. I object to Pens that dry out, or leave blobs o
  • Chatbox

    You don't have permission to chat.
    Load More
  • Files






×
×
  • Create New...